Tag Archives: air compressor for laser cutting

22kw 30 HP Four-in-One Integrated Portable Oil Injected 16bar Single Screw Air Compressor with 500L Air Tank for Fiber Laser Cutting

22kw 30 HP Four-in-One Integrated Portable Oil Injected 16bar Single Screw Air Compressor with 500L Air Tank for Fiber Laser Cutting

DuriAuxiliary fuel for Fiber Laser Slicing, did you get the proper one particular?

The schematic diagram of laser slicing is proven in the subsequent.

Throughout the procedure, auxiliary fuel is required to blow off the slag/dross in the kerf and amazing down the reducing surface area, also it safeguards lens and nozzle of laser. Essentially there are three types of gasoline: Oxygen, Nitrogen and Air, any of them influences immediately to the reducing overall performance, pace, thickness etc. So we genuinely want to think better before action.

1.Oxygen

Oxygen is commonly utilised to lower thick carbon metal since the chemical response amongst iron element and oxygen aids the steel take in warmth and promotes it soften, which can significantly increase the reducing performance.

Even so, oxygen will result in a marked oxide film on the minimize surface area and it will have a quenching effect around, increases the hardness which affect on subsequent processing. It also turns kerf to black or dark yellow.

CZPTly, Oxygen assists carbon metal plates lower, minimal-strain punching, and low-pressure cutting. Oxygen is typically vaporized from liquid oxygen which presented by the local provider, so the high quality of the fuel source is clean and no need to have particular remedy.

two. Nitrogen

Nitrogen will type around the molten metal as protecting ambiance whilst it really is assisting the minimize, stop oxidation of the material, steer clear of the formation of oxide film. However, the reducing pace is not as fast as oxygen, and the nitrogen usage of the nitrogen is big which implies the value will be larger.

The non-oxidized floor has the characteristics of immediate welding, robust corrosion resistance and the kerf turns white.

CZPTly, nitrogen is employed to lower stainless steel, galvanized sheet, aluminum, aluminum alloy, brass and other resources, by minimal-stress perforation and high-stress slicing. When cutting with nitrogen, the adjust of the gasoline flow has a excellent impact on the chopping functionality, in this situation, make sure the fuel flow is adequate and continual. Nitrogen is typically vaporized from liquid nitrogen offered by provider, so the good quality should be thoroughly clean.

three. Air

Air, as it really is the most financial medium since it is a lot simpler to receive than oxygen and nitrogen, no one can demand you for air!

Every single a single understands the air consists of about twenty% oxygen and about 78% nitrogen, so it can make up for both shortage and cutting velocity is slower than oxygen but faster than nitrogen. Given that the oxygen is associated, the kerf turns a minor bit yellow. It’s the most economic selection for you as lengthy as you are okay with the color adjust.

CZPTly compressed air can be utilised for cutting sheet-metallic components, aluminum sheet, nonmetal and galvanized sheet and so forth., air support can surely decrease the oxide movie and totally preserve your cost, therefore, air help is much more and far more equipped in fiber laser cut industry.

Compressed air can be received effortlessly with an CZPT, but not any CZPT can be outfitted for Fiber Laser Cutter as the Air alone is not cleanse, especially after compressing, there are lots of water, oil and particles and any of them sprayed on the lens, the transmission of laser beam will be significantly impacted and emphasis scattered, ensuing negative chopping effect this kind of as base burrs or tough kerf, even obsolescence.

Situation could be considerably worse if it is higher-power fiber laser, even a little particle or a small spray will extremely possibly burn off your complete lens cone.

In buy to make the most financial (Air help) way workable, make certain slicing good quality and stay away from any damage for your fiber laser, the compressed air should be pure and consistent, one hundred% satisfy ISO 8573-one-2571 CZPT.

CZPT 4-in-one (CZPT + receiver tank+ dryer + filters) substantial pressure CZPT is special compressor for Fiber Laser Reducing industry, personalized constructed to provide filtered, dried, steady dependable provide of substantial strain compressed air at two~10ºCdew stage to support laser slicing. Produce your personal assist air at a portion of the cost of cylinder.

CZPT Parameters

DBZY/DMZY Series(Combined with air dryer and tank) CZPT CZPT 
Model Air flow Capacity(m3/min)/cfm Power
kW/HP		 Noise
DB(A)		 Diameter
Inch		 Dimension
W×D×H mm		 Excess weight
kg		 Tank
L
8bar 10bar 13bar 16bar
m3/min cfm m3/min cfm m3/min cfm m3/min cfm
DBZY-7.5A .eighty four 29.6 .seventy five 26.five / / / / five.five/seven.5 65 G3/4” 1418×700×1500 375 260
DBZY-10A 1.two forty two.4 1 35.three .84 29.6 .61 21.5 seven.5/10 65 G3/4” 1418×700×1500 395 260
DBZY-15A 1.6 fifty six.five 1.four forty nine.four 1.2 forty two.three 1.05 37 11/fifteen sixty five G3/4” 1882×790×1731 560 500
DBZY-20A two.three 81.2 2 70.six one.six 56.5 1.41 forty nine.eight fifteen/twenty 65 G3/4” 1882×790×1731 572 five hundred
DMZY-10A one.2 forty two.four 1. 35.3 .84 29.7 / / seven.5/10 sixty five G3/4” 1418x700x1500 395 260
DMZY-20A two.3 81.2 1.eight sixty three.6 one.6 fifty six.five one.forty one 49.8 15/20 sixty five G3/4” 1882x790x1731 572 five hundred
DMZY-30A 3.6 127.one three.2 113 / / two.41 85.1 22/30 sixty eight G3/4” 1882x1081x1801 630 500

Notes:one. A represents air-cooling variety,W represents drinking water-cooling sort
two. Doing work CZPT temperature: -5ºC~45ºC
three. Discharge temperature is significantly less than ambient temperature +10ºC~15ºC
four. CZPT Method: belt driven
5. CZPTtup Mode: immediate commence under 11kw, and  above 11kw
six. Work Electricity: 380V / 50HZ, 460V / 230V / 6KV and 10KV voltages can be produced for clients
seven. F.A.D quantity circulation take a look at is in accordance to ASMC PTC9 or ISO1217 CZPT (GB/T3853)

Certification

Venture Case

Customer Comments

CZPT and delivery

About Us

CZPT CZPT was launched in 1996 with over a hundred and fifty competent workers and a lot more than 25 R&D engineersteams ‘ .We focus on the research & build,manufacture and strength-saving answers of screw CZPT to create value for buyers and society.In 2018 our total revenue volume approached fifteen million US pounds.By more than 23 many years increased activities of creating,
creating and advertising and marketing,nowadays our valued clients are in excess of 130 countries.

Germany Normal and thirteen a long time exporting experience assist us won a lot more than fifty faithful overseas agents.

CZPT’s primary companies concentrate in subsequent crucial areas:
Oil-injected rotary screw compressors
Moveable screw CZPTs
Oil free of charge CZPTs
Large strain CZPTs
Air treatment products

At CZPT,we receive our customers’ trust and satisfaction by producing the outstanding quality compressed air merchandise for all industries.All of our items are made for dependable efficiency,simple routine maintenance,and optimum power performance.We have product sales reps who can talk English,Spanish,French,and Russian which can make it easier for our clients from all above the world to interact and negotiate with us.

CZPT continually innovates solution advancement and administration to meet customers’ desire.The potent business culture and ongoing innovation make CZPT enhanced quickly to attain the company principle”CZPT Preserving Very first, Mutual Benefit CZPTd”. CZPT mission is to be a planet-renowned higher-end brand,with sustainable improvement,constantly enhancing its own benefit and sharing it with our buyers and staff.Dedicated to provide our buyers a silent and energy-saving created goods.

Our Support

1.24/seven right after sales provider support in diverse languages.
two.Comply with up the comments of goods in 2 months interval by email or get in touch with.
three.Direction of set up and commissioning on internet site can be offered by manufacturing unit-trained experts or nearby Licensed Support Centre.
four.CZPT coaching for customers in DEHAHA CZPT manufacturing unit or working website.
5.Plenty of CZPT spare areas with confirmed top quality are all available from our central stocks in ZheJiang and all distributors’depots. 
6.All kinds of technological documents in distinct languages.

FAQ

Q1. Are you trading company or manufacture ?
A: We are skilled manufacture of screw CZPT of CZPTsu, China, a lot more than 24 a long time.
 

Q2. How long is the delivery time ?
A: For CZPT voltage ,15 doing work times. Non-CZPT ,you should get in touch with our revenue.
 

Q3. What is actually payment time period ?
A: T/T, L/C, D/P, CZPT CZPT, Paypal, Credit history Card, and and so on. Also we could accept USD, RMB, Euro and other currency.
 

This autumn. How about your right after-product sales service ?
A: 1.Supply customers with installation and commissioning on-line instructions.
     2. Effectively-skilled engineers offered to abroad services.
     3.Worldwide brokers and after services avaiable.organize our engineers to help you instruction and set up.
 

Q5. How about your warranty?
A: 1 calendar year for the entire device and two years for screw air finish, besides consumable spare elements.
 

Q6. Do you have any certification ?
A: Indeed, for each diverse customer’s industry require ,we can provide CE ,ISO and so forth certification.
 

Q7. What about the servicing ?
A: Initial maintenance require to be accomplished following 500Hours, and then each and every 2000-3000 hours to do the normal upkeep, and contemplate the real surroundings.
 

Q8. How do you management good quality ?
A: 1.The uncooked supplies are strictly inspected
     2. Some essential areas are imported from abroad
     3.Each compressor need to go at least five hrs of continuous testing before leaving the factory.
 

Q9. Do you provide OEM provider ?
A: Sure.Each OEM & ODM service can be acknowledged.
 

Q10.How long could your CZPT be utilized?
A: CZPTly, more than 10 many years.

22kw 30 HP Four-in-One Integrated Portable Oil Injected 16bar Single Screw Air Compressor with 500L Air Tank for Fiber Laser Cutting

4-in-One Screw Air Compressor for 2000W 3000W 4000W 6000W CNC Fiber Laser Cutting Machine

4-in-One Screw Air Compressor for 2000W 3000W 4000W 6000W CNC Fiber Laser Cutting Machine

DuriAuxiliary gas for Fiber Laser Slicing, did you get the right one?

The schematic diagram of laser cutting is demonstrated in the pursuing.

In the course of the process, auxiliary gas is necessary to blow off the slag/dross in the kerf and cool down the slicing surface area, also it shields lens and nozzle of laser. Basically there are 3 types of fuel: Oxygen, Nitrogen and Air, any of them influences directly to the slicing functionality, speed, thickness and so on. So we truly need to have to think much better prior to motion.

one.Oxygen

Oxygen is commonly utilized to reduce thick carbon steel due to the fact the chemical response among iron element and oxygen aids the metallic soak up heat and promotes it soften, which can tremendously increase the chopping performance.

Even so, oxygen will trigger a marked oxide film on the reduce surface area and it will have a quenching influence close to, increases the hardness which influence on subsequent processing. It also turns kerf to black or dark yellow.

CZPTly, Oxygen helps carbon metal plates reduce, minimal-pressure punching, and low-force slicing. Oxygen is generally vaporized from liquid oxygen which provided by the neighborhood supplier, so the quality of the gasoline resource is thoroughly clean and no need specific remedy.

two. Nitrogen

Nitrogen will form about the molten metallic as protecting environment while it’s assisting the minimize, prevent oxidation of the substance, steer clear of the development of oxide movie. Nonetheless, the reducing velocity is not as quickly as oxygen, and the nitrogen intake of the nitrogen is massive which means the expense will be increased.

The non-oxidized surface area has the characteristics of immediate welding, sturdy corrosion resistance and the kerf turns white.

CZPTly, nitrogen is utilized to minimize stainless metal, galvanized sheet, aluminum, aluminum alloy, brass and other materials, by minimal-pressure perforation and high-strain cutting. When slicing with nitrogen, the adjust of the gas circulation has a wonderful impact on the slicing functionality, in this circumstance, make certain the fuel stream is ample and continual. Nitrogen is normally vaporized from liquid nitrogen presented by provider, so the good quality ought to be thoroughly clean.

3. Air

Air, as it truly is the most economic medium since it’s considerably less complicated to get than oxygen and nitrogen, nobody can charge you for air!

Each and every one particular is aware the air includes about 20% oxygen and about 78% nitrogen, so it can make up for each lack and slicing velocity is slower than oxygen but more rapidly than nitrogen. Considering that the oxygen is associated, the kerf turns a minor bit yellow. It really is the most economic selection for you as lengthy as you are all right with the shade change.

CZPTly compressed air can be employed for slicing sheet-steel components, aluminum sheet, nonmetal and galvanized sheet and so forth., air help can surely decrease the oxide film and absolutely help save your value, consequently, air assist is far more and much more equipped in fiber laser minimize sector.

Compressed air can be obtained effortlessly with an CZPT, but not any CZPT can be outfitted for Fiber Laser Cutter as the Air by itself is not thoroughly clean, particularly right after compressing, there are plenty of h2o, oil and particles and any of them sprayed on the lens, the transmission of laser beam will be seriously afflicted and focus scattered, resulting poor chopping result these kinds of as base burrs or rough kerf, even obsolescence.

Circumstance could be a lot worse if it is high-energy fiber laser, even a little particle or a minor spray will really probably burn off your total lens cone.

In purchase to make the most financial (Air assist) way workable, ensure chopping good quality and avoid any harm for your fiber laser, the compressed air should be pure and continuous, 100% fulfill ISO 8573-1-2571 CZPT.

CZPT 4-in-one particular (CZPT + receiver tank+ dryer + filters) substantial force CZPT is particular compressor for Fiber Laser Reducing market, custom made constructed to give filtered, dried, ongoing reputable source of high stress compressed air at two~10ºCdew point to aid laser chopping. Make your possess support air at a fraction of the value of cylinder.

CZPT Parameters

DBZY/DMZY Series(Combined with air dryer and tank) CZPT CZPT 
Model Air flow Capacity(m3/min)/cfm Power
kW/HP		 Sounds
DB(A)		 Diameter
Inch		 Dimension
W×D×H mm		 Fat
kg		 Tank
L
16bar
m3/min cfm
DBZY-10A .fifty five 19.four 7.5/ten 65 G3/4” 1418×700×1500 395 260
DBZY-15A one.05 37 eleven/15 sixty five G3/4” 1882×790×1731 560 five hundred
DBZY-20A 1.05 37 15/20 sixty five G3/4” 1882×790×1731 572 500
DMZY-15A one.05 37 7.five/ten sixty five G3/4” 1418x700x1500 395 260
DMZY-20A one.fifty two 53.seven 15/20 sixty five G3/4” 1882x790x1731 572 five hundred
DMZY-30A 2.forty one eighty five.1 22/thirty 68 G3/4” 1882x1081x1801 630 500
DCZY-30A 2.21 seventy eight 22/30 sixty eight G3/4” 1882*1081*1801 630 500
DB-20A 1.sixteen 40.9 fifteen/twenty 65 G3/4” 1162*690*1571 275 /
DBM-20A one.eighteen 41.seven 22/thirty 65 G3/4” 1162*690*1571 three hundred /
DC-30A two.twenty 77.seven 22/thirty sixty eight G1″ 1330*830*1265 400 /
DM-30A 2.forty one eighty five.one 22/thirty sixty eight G1″ 1330*830*1265 420 /
DM-50A three.90 137.six 37/fifty seventy two G1″ 1550*940*1415 680 /

Notes:one. A represents air-cooling variety,W signifies h2o-cooling variety
2. Working CZPT temperature: -5ºC~45ºC
three. Discharge temperature is considerably less than ambient temperature +10ºC~15ºC
four. CZPT Method: belt pushed
5. CZPTtup Method: immediate start off under 11kw, and  above 11kw
6. Work Energy: 380V / 50HZ, 460V / 230V / 6KV and 10KV voltages can be created for buyers
7. F.A.D volume flow test is according to ASMC PTC9 or ISO1217 CZPT (GB/T3853)

Certification

Task Circumstance

Customer Suggestions

CZPT and shipping and delivery

About Us

CZPT CZPT was founded in 1996 with over one hundred fifty skilled workers and much more than twenty five R&D engineersteams ‘ .We concentrate on the investigation & build,manufacture and strength-conserving remedies of screw CZPT to develop value for clients and culture.In 2018 our complete product sales quantity approached 15 million US dollars.By in excess of 23 years increased activities of planning,
producing and marketing and advertising,these days our valued consumers are over one hundred thirty countries.

Germany Normal and 13 many years exporting expertise support us won a lot more than 50 loyal abroad brokers.

CZPT’s primary organizations focus in pursuing essential areas:
Oil-injected rotary screw compressors
Portable screw CZPTs
Oil free of charge CZPTs
Substantial strain CZPTs
Air therapy tools

At CZPT,we generate our customers’ have confidence in and gratification by producing the superior top quality compressed air goods for all industries.All of our merchandise are designed for dependable functionality,simple servicing,and greatest power efficiency.We have product sales associates who can talk English,Spanish,French,and Russian which makes it easier for our clients from all in excess of the entire world to interact and negotiate with us.

CZPT continuously innovates item development and management to satisfy customers’ need.The strong business tradition and steady innovation make CZPT enhanced speedily to reach the enterprise basic principle”CZPT Conserving First, Mutual Price CZPTd”. CZPT mission is to be a entire world-renowned substantial-conclude brand name,with sustainable improvement,constantly improving its possess benefit and sharing it with our buyers and workers.Committed to provide our clients a silent and vitality-conserving made products.

Our Support

1.24/seven right after sales provider support in distinct languages.
two.Adhere to up the opinions of goods in 2 months interval by email or get in touch with.
3.Advice of installation and commissioning on internet site can be provided by factory-qualified professionals or nearby Authorized Service Centre.
4.CZPT education for buyers in DEHAHA CZPT manufacturing unit or working website.
5.Lots of CZPT spare elements with confirmed top quality are all obtainable from our central shares in ZheJiang and all distributors’depots. 
6.All varieties of technological documents in various languages.

FAQ

Q1. Are you investing firm or manufacture ?
A: We are expert manufacture of screw CZPT of CZPTsu, China, far more than 24 years.
 

Q2. How extended is the shipping time ?
A: For CZPT voltage ,fifteen doing work times. Non-CZPT ,remember to speak to our revenue.
 

Q3. What is actually payment time period ?
A: T/T, L/C, D/P, CZPT CZPT, Paypal, Credit rating Card, and and so forth. Also we could take USD, RMB, Euro and other currency.
 

Q4. How about your after-product sales provider ?
A: 1.Provide consumers with set up and commissioning online directions.
     2. Nicely-educated engineers obtainable to abroad services.
     3.Worldwide agents and right after services avaiable.prepare our engineers to assist you coaching and set up.
 

Q5. How about your warranty?
A: A single calendar year for the whole machine and two years for screw air end, except consumable spare areas.
 

Q6. Do you have any certification ?
A: Yes, for each different customer’s industry need to have ,we can supply CE ,ISO and so on certificate.
 

Q7. What about the routine maintenance ?
A: First routine maintenance need to have to be completed soon after 500Hours, and then each and every 2000-3000 hours to do the normal routine maintenance, and take into account the actual surroundings.
 

Q8. How do you control quality ?
A: 1.The raw materials are strictly inspected
     2. Some essential components are imported from abroad
     3.Each compressor must go at the very least five hrs of constant screening before leaving the manufacturing facility.
 

Q9. Do you provide OEM services ?
A: Indeed.Equally OEM & ODM services can be recognized.
 

Q10.How prolonged could your CZPT be employed?
A: CZPTly, much more than ten a long time.

4-in-One Screw Air Compressor for 2000W 3000W 4000W 6000W CNC Fiber Laser Cutting Machine

15kw 16bar Permanent Magnet Rotary Screw Air Compressor with Tank and Air Dryer for Laser Cutting

15kw 16bar Permanent Magnet Rotary Screw Air Compressor with Tank and Air Dryer for Laser Cutting

     Unit Configuration
           ★Permanent magnet variable frequency screw CZPT
                 Adopt higher effectiveness long term magnet motor, preserve above ninety six% effectiveness underneath any loadThe mesh is far more than 30% energy saving than regular motor and is not easy to demagnetization.
                Utilizing intelligent inverter controller, modular design straightforward servicing and growth, high-speed interaction interface, advanced warmth dissipation layout good quality electrical factors, lengthy provider daily life.
            ★Plate sort warmth transfer freeze dryer
              Aluminum plate warmth exchanger substance has better heat transfer influence than classic shell and tube heat exchanger, which can speedily lessen temperature and take away h2o, and lower dew level of completed goods.
             ★High-performance precision filter level four:
              Select ATS filter, excellent top quality, trustworthy filtration performance, filtration accuracy up to .01m/.01ppm.


Q1: What is the rotor speed for the air end?
A1: 2980rmp.

Q2: What’s your lead time?
A2: usually, 5-7 days. (OEM orders: 15days)

Q3: Can you offer water cooled CZPT?
A3: Yes, we can (usually, air cooled type).

This fall: What’s the payment term?
A4: T/T, L/C, CZPT CZPT, etc. Also we could accept USD, RMB, and other currency.

Q5: Do you accept CZPT voltage?
A5: Yes. 380V/50Hz/3ph, 380V/60Hz/3ph, 220V/50Hz/3ph, 220V/60Hz/3ph, 440V/50Hz/3ph, 440V/60Hz/3ph, or as per your requests.

Q6: What is your guarantee for CZPT?
A6: One year for the entire CZPT(not including the consumption spare areas) and technical supports can be supplied in accordance to your wants.

Q7: Can you accept OEM orders?
A7: Sure, OEM orders are warmly welcome.

Q8: How about your customer service and after-sales service?
A8: 24hrs on-line support, 48hrs problem solved promise.

Q9: Do you have spare parts in stock?
A9: Yes, we do.

Q10: What kind of initial lubrication oil you used in CZPT?
A10: TOTAL 46# mineral oil.

15kw 16bar Permanent Magnet Rotary Screw Air Compressor with Tank and Air Dryer for Laser Cutting

8bar 16bar 415V 50Hz Compressor Freeze Air Dryer for Laser Cutting Industry

8bar 16bar 415V 50Hz Compressor Freeze Air Dryer for Laser Cutting Industry

CZPT Air CZPT Air Cooled Fridge AIR DRYER for cooling compressed air gas

 

Reputable and inexpensive overall performance
Threaded pipelines of the heat exchanger improve the making use of charge of cooling air. The evaporator is manufactured from laminose copper pipeline with aluminum flake, large effectiveness, and minimal vitality use. Condenser manufactured from fin copper, good warmth exchanging charge without freeze and jam

CZPTal pleasant
Aluminum-alloy-manufactured heat exchangers by no means get rusted, powerful anti-corrosion residence, air pollution reoccurrence cost-free. CZPTal cooling medium adopted throughout the series, maintaining up with the worldwide tendencies of environment defense

Top configuration
The complete sequence of refrigerated compressors are of very first-class brand names, this sort of as PERFORMER, KERRY, CZPT, and MANEUROP Whole sequence of refrigeration control components are of first-course brand names, this kind of as DANFOSS and ALCO
Whole collection of air coolers adopt nanometer anti-corrosion coating on the surfaces

Total Handle
Straightforward to use controller automatically manages dryer operation even though monitoring vital parameters for optimum air treatment method and efficiency

Adaptable Style
Air-cooled and drinking water-cooled possibilities and compact size to match any application Easy for set up and cost-free maintenance

Air cooled refrigeration dryer
                      Product
Item   		 EAD-01s EAD-01 EAD-02 EAD-03 EAD-06 EAD-07 EAD-08 EAD-ten EAD-13 EAD-fifteen EAD-18 EAD-twenty five EAD-35 EAD-45
Air ability(Nm3/min) .6 one.two 2.four 3.8 six.5 seven.2 eight.five ten.7 thirteen.5 15.two 18  twenty five 35 forty five
Voltage(V/50Hz) 220 220 220 220 220 220 220 380 380 380 380 380 380 380
Comp-Electricity(KW) .fifty eight .59 .75 .89 1.23 one.fifty five 1.7 one.nine 2.01 2.34 2.six three four.five 7.5
Admirer Power(W) 95 95 ninety five a hundred and fifty a hundred and fifty 150 180 a hundred and eighty 240 240 240 240 720 850
Inlet dia G1″ G1″ G1″ G1-one/2″ G1-one/2″ G1-one/2″ G2″ G2″ G2″ G2.5″ DN65 DN80 DN100 DN125
Excess weight(kg) 48 fifty two sixty five 82 ninety six 109 127 145 176 198 210 298 420 550
Dimensions L(mm) 650 650 900 1000 a thousand 1120 1200 1300 1450 1550 1620 1860   1960
W(mm) 450 450 470 500 520 580 580 580 620 700 seven hundred 780 850 950
H(mm) 610 620 680 690 730 790 790 840 870 990 1075 1410 1410 1610

Configured Large top quality CTA class precision CZPT

Configured Large top quality CTA class precision CZPT Component
Welcome inquiry for particular pressure and unique measurement for OEM personalize get

FAQ

Q1:Are you the manufacturing unit or buying and selling organization? 

A4: Absolutely! You have touched the main sources of Air /Gas CZPT FATORY launched in 2002. 

 Q2: What is actually your main products? 
A: CZPT CZPT, CZPT Fuel CZPT, LPG/CNG compressor, Hydrogen gasoline compressor, Oxygen gas compressor, CO2/ CO compressor, Methane CZPT, etc, the total industrial / CZPT/ Oil subject/ CZPT hospital all kinds of high-pressure massive capacity purposes and connected items. 

Q3: How long is your fuel compressor warranty?
A: Generally 1 calendar year /twelve Months for complete compressor machine, 2years/24months for air finish (other than upkeep spare elements.). And we can give further guarantee if needed.

This fall: How prolonged could your CZPT be utilized?
A: CZPTly, for all our fuel compressor created provider lifestyle far more than 25 a long time, with great standard maintenance.

Q5: Does your firm settle for customization?  
A: Yes, of program. With prosperous expertise carrying out ODM  customize compressor in accordance to clients’s  different depth utilizing problems. And sales crew 24 several hours on-line support offered. 48hours dilemma solved guarantee.

Q6:  What’s payment expression?
A: T/T, L/C, D/P, CZPT CZPT, Paypal, Credit history Card, CZPT Assurance and and so forth. Also we could take USD, RMB, GBP, Euro and other forex.

Q7: How about your following-product sales support?
A: one. Provide buyers with intallation and commissioning on the internet instructions.
two. Effectively-skilled engineers available to overseas right after-income service.

Q8: Can we check out your manufacturing unit?

A: Sure, welcome to check out our factory.

 

 

8bar 16bar 415V 50Hz Compressor Freeze Air Dryer for Laser Cutting Industry

Industrial 7.5kw 10HP Four-in-One Integrated Low Noise Portable Oil Injected 16bar Single Screw Type Air Compressor with 500L Air Tank for Fiber Laser Cutting

Industrial 7.5kw 10HP Four-in-One Integrated Low Noise Portable Oil Injected 16bar Single Screw Type Air Compressor with 500L Air Tank for Fiber Laser Cutting

                                                                                             


Transient introduction:
Air end: German CZPT. 30 years developed life time.
Motor: 100% total cooper coil.
Warranty: 5 several years for the air conclude, and 2 many years for the total compressor. 
Supply time: seven-fifteen times. 
We have our skilled right after-revenue technician to instruct the set up of the entire screw CZPT.    
Motor Power: seven.5kw 10hp
Operating Strain: 7 – twelve.5bar (one hundred – 181psi)
Air Delivery: 0.7 – 1.1mthree/min
Variety of Driving: Immediate CZPTn
Sort of CZPT: Air CZPT
Sound: 65dB
Dimensions: 1650*730*1530mm
Fat: 680kg   

Design Air Circulation (m³/min) Motor Electrical power Sounds Tank Volume Outlet Diameter Dimension Fat
7bar 8bar 10bar 13bar kw dB L inch W*D*H  (mm) kg
YC-seven.5A one. .8 .5 .4 5.5 sixty five 300 G3/4” 1650*730*1530 655
YC-10A 1.1 1. .85 .7 seven.5 sixty five three hundred G3/4” 1650*730*1530 680
YC-15A 1.8 1.65 one.five one.3 eleven sixty five five hundred G1” 1955*800*1800 785
YC-20A two.4 two.2 2.one one.eight fifteen 68 500 G1” 1955*800*1800 810
YC-25A 3.one 3. two.seven 2.three eighteen.five sixty eight five hundred G1” 1960*1070*2012 910
YC-30A three.eight three.six three.two 2.five 22 68 five hundred G11/2” 1960*1070*2012 930
Remarks:
1. operating ambinent temperature: -5ºC-45ºC
2. exhausting air temperature ≤  doing work ambinent temperature +10ºC-15ºC
three. commencing mode: Y-△
four. exhausting oil content: <3ppm
5. certification:  CE/ISO9001/ASME
six. voltage:  380V/220V/400V/440V/415V

Internal element pictures of Y-air CZPT 7.5kW 10HP 4-in-A single Integrated Minimal Noise Moveable Oil Injected 16bar Single CZPT variety Air CZPT with 500L Air Tank for Fiber Laser Chopping

Major spare part of Y-air CZPT seven.5kW 10HP Four-in-One Integrated Minimal Sound Moveable Oil Injected 16bar Solitary CZPT sort Air CZPT with 500L Air Tank for Fiber Laser Slicing 

Characteristics of Y-air CZPT 7.5kW 10HP 4-in-One particular Built-in Reduced Noise Portable Oil Injected 16bar Solitary CZPT sort Air CZPT with 500L Air Tank for Fiber Laser Chopping
1. CZPT compressor with air tank is built-in with CZPT, air dryer, filters and air tank.
two. It really is simple to use. Customers just need to hook up it to the electrical power supply for working.
three. It is convenient for area movement with the 4wheels. 
4. It’s price successful, as there is no extra purchasing of the pipe for set up. 

Rewards of Y-air CZPT seven.5kW 10HP 4-in-A single Built-in Lower Noise Moveable Oil Injected 16bar Single CZPT type Air CZPT with 500L Air Tank for Fiber Laser Cutting

1. Affordable construction and ideal stability of power
2. Large trustworthiness with a prolonged support life. There will be no huge problem in 80,000hrs
3. Simple procedure and maintenance. The immediate driven screw CZPT has a high automation, and the operator isn’t going to want to udergo the lengthy-phrase specialist training to acheive unattened operation
four. Strong adaptablity of the immediate driven screw CZPT. The direct pushed screw CZPT has the traits of compelled gas transmission. The circulation charge is virtually independent of the exhaust stress. 



QC Checking of Y-air CZPT seven.5kW 10HP Four-in-A single Built-in Minimal Noise Portable Oil Injected 16bar Single CZPT variety Air CZPT with 500L Air Tank for Fiber Laser Chopping
We do the verify of every detail and spare parts of Hot Sale seven.5kw 10HP inverter Direct CZPTn combined CZPT Air CZPT device. And we will check the most hassle-free immediate pushed screw compressor with air tank for 48hours ahead of bundle and shipment.

F.A.Q

Q1. Why do consumers choose us?
Yunshun CZPTtric CZPTry Co., Ltd. is a company specializing in screw air compressor for 18 years since 2001. Our German Standard production line helps us get the affirmation from our agents as properly as stop-user customers.

Q2. Are you a manufacturer or trading company?
We are a professional manufacturer with big modern factory in HangZhou,China.
Both OEM & ODM service can be acknowledged.

Q3. What’s your delivery time?
CZPTly 7-ten days, if urgent order, we can arrange, as well.

Q4. How long is your air compressor warranty?
two year for the whole machine and 5years for screw air end, besides consumable spare parts.

 Q5. How long could your air compressor be used for? 
At least 10 years.

Q6. What’s payment term?
T/T, L/C, CZPT CZPT, Credit Card, and and so forth.

Q7. How about your customer service?
24 several hours on-line service for all our clients.

Q8. How about your after-sales service?
one. Providing customers with installation on the web instructions.
2. Nicely-educated engineers offered to abroad provider.
three. PlHangZhou for oversea after-product sales supporting business.

 

Industrial 7.5kw 10HP Four-in-One Integrated Low Noise Portable Oil Injected 16bar Single Screw Type Air Compressor with 500L Air Tank for Fiber Laser Cutting

11kw 15kw 22kw 13bar 16bar Industrial Low Noise Electric Portable Single Oil Injected Rotary Screw Type Air Compressor with 500L Air Tank for Laser Cutting

11kw 15kw 22kw 13bar 16bar Industrial Low Noise Electric Portable Single Oil Injected Rotary Screw Type Air Compressor with 500L Air Tank for Laser Cutting

Factory direct supply Everlasting CZPT CZPT VSD (PM VSD)CZPT Air CZPT For Sand Blasting CZPT

1. Product photo : 

 

two.CZPT information :

 

one. Air finish:
 Large rotor with realistic size-diameter ratio, huge fuel generation, reduced rotating velocity, little vibration, reduced sound, effectively play the stability of the head, the rotor content is produced of wear resistant high-power alloy steel
 
2. Motor:
three section asynchronous motor,IP54/IP55,F course insulation,SKF in excess of-loading bearing,output performance up to 95%,service element SF=one.15,Volt. And Freq. CZPT,insert oil injection port at each end of bearing shell, easy maintenance 
three. VSD inverter( optional ):
routinely modify motor RMP according to true needs, the genuine power, power -saving more than 30%,get rid of the peak current 
4.High energy cooling enthusiast:
independent external motor which is not to be burn up out effortlessly,durable substantial warmth dissipation efficiency ensure 24 hours constant procedure in higher temperature and humidity setting
five.Cooler :
air cooler/ drinking water cooler,higher efficiency ,reduced noise,large quality aluminum materials ,include axial movement enthusiast, make certain perfect cooling impact
six.Air filter:
 two stage dust removing and filtering method with efficiency of up to ninety nine.9% even in hefty-dust atmosphere
seven.oil filter
higher performance oil filter gets rid of lubricant magazine make sure longer operating life and preserve routine maintenance price
8.Ingestion valve
According the real need to have, the gas can be routinely altered to reduce the procedure price
9.vibration-evidence strain gauge:
correctly display the strain worth of the CZPT tanker, handy to see and change to satisfy distinct perform wants
ten.developed -in soundproof cotton
interior seem-absorbing cotton .effectively minimize the sound machines operation, lower sounds tiny vibration, appears as minimal as 50db
eleven. CZPT PLC touch display screen controller
basic operation, clear operation status, 24 hours for you to perform

three.Solution Characteristics:
 

  1) Large reliability
 • big air stop and lower velocity design and style
 •SKF bearings whose support lifestyle for far more than 50,000 hrs , low put on and prolonged services life 
 • CZPT imported pushed elements: coupling
 •More than 30% warmth dissipation design 
  2)  CZPT conserving
 • The rotor adopts CZPTean and CZPTican patent screw kind line design and style, substantial performance, vitality conserving
 • fairly configure the enthusiast , configure the least energy on the premise of maximum efficiency
 • all CZPT immediate generate models lessen equipment configuration to decrease vitality loss
 • every single unit is tested by the nationwide energy performance laboratory, and each and every device is guaranteed to attain the countrywide level 

 
4. Functions & rewards for GREAT   intergrated screw CZPT for laser chopping machines:

one)Intergrated:  integrated,straightforward to put in
 •save the difficulties of matching the air receiver tank, air dryer and filter
 • save the difficulties of connecting the pipeline, only plug electricity to use
 •no need to have a lot of other suppliers to do soon after-income service
 •Using a substantial-efficiency refrigerated air dryer and a 4-phase higher-effectiveness precision filter, the stress point of the pure compressed air is ensured to be as lower as two-5ºC, the  oil content is as lower as .001 PPM, and the particle filtration precision reaches to .01m

two)Smart:  CZPT color display screen manage, more comprehending of equipment procedure information
Info checking, fault alarm, knowledge acquisition, parameter placing

three) Secure: Long lasting magnet inverter screw equipment, stable force, more easy slicing
Long lasting magnet inverter screw device, stable pressure, a lot more smooth reducing
Long lasting magnet inverter screw equipment, minimal rotation velocity, higher effectiveness, power preserving, and at the identical time to guarantee that the working pressure is always steady, use of vibration reduction style, and the adaptable pipe relationship, properly decrease vibration and sounds, operating sound < 70dB (A)

5.Techincal parameter : 

 

Design Working stress (Bar) Flow Air Ability(m3/min) Electricity (Kw) Sounds (dBa) Proportions (mm) Outlet pipe size Weight (Kg)
TKY-11F/thirteen 13 1 eleven seventy two 2098*640*1810 G3/4 900
TKY-11F/13 16 1.5 fifteen 72 2148*690*1810 G3/four 900
TKY-11F/13 sixteen 2 22 72 2480*800*1880 G3/four 1100
TKYC-11F/13 13 1 11 seventy two 2048*720*1710 G3/four 1100
TKYC-15F/sixteen 16 1.five fifteen 72 2048*720*1710 G3/4 1300
TKYC-22F/16 sixteen 2 22 72 2480*800*1880 G3/four 1300

 

6.Application :

six.Certification :

seven. other related items :
 

·fixed velocity(FSD) screw CZPT
·variable speed(VSD)screw CZPT
·permanent magnet variable speed( PM VSD)screw CZPT
·2 phase compression FSD screw CZPT
·2 phase compression PM VSD screw CZPT
·low strain screw CZPT
·diesel engine driven transportable screw CZPT
·electric motor pushed moveable screw CZPT
·outdoor use screw CZPT
·oil free screw blower 
·integrated screw CZPT for laser cutting devices

8. Company introduction:

ZheJiang Excellent Air compressor Co., ltd, is one leading manufacture and exporter of CZPT in ZheJiang , China, Founded 1957 many years, coving an location of 200000 sq. meters. Now exporting to more than 120 nations around the world. Has set up a enormous revenue and services network at property and abroad.

 

why you select us ? one. In excess of 60 several years China professsinal manufacture for CZPT ,An ISO9000 organization
 

2.CZPTean CZPT,China created &manufacturing unit directly supply 

3. Exceptional porformance &high performance with sensible price 

four.Reduced energy consumptions for a lot more output

5.Trouble free & cost saving

six.Timely pre-sale and soon after-sale service 
7.Easy operatation &maintenance  
 

nine.FAQ : 
Q1: Are you manufacturing unit or trade firm?  
A1: We are manufacturing facility.
Q2: Warranty terms of your equipment? 
A2: A single calendar year guarantee for the device and specialized help in accordance to your wants.
Q3: Will you provide some spare elements of the devices? 
A3: Of course, of program.
This autumn: How extended will you just take to set up generation? 
A4: 380V 50HZ we can supply the goods inside twenty days. Other electrical power or other color we will delivery inside of 30 times.
Q5: Can you take OEM orders? 
A5: Indeed, with professional design and style crew, OEM orders are extremely welcome!

eleven.Get in touch with: 

 

11kw 15kw 22kw 13bar 16bar Industrial Low Noise Electric Portable Single Oil Injected Rotary Screw Type Air Compressor with 500L Air Tank for Laser Cutting

Simple Operation 11kw 8bar AC Power Compact Single Screw Air Compressor with Tank for Laser Cutting

Simple Operation 11kw 8bar AC Power Compact Single Screw Air Compressor with Tank for Laser Cutting

1. Our Workshop
 

ZheJiang Sollant machinery producing Co., Ltd.is positioned in HangZhou -logistics metropolis , with the advantage of rapid transportation of merchandise. The company is an built-in sector and trade company.The company handles an region of a lot more than ten thousand square meters.with an yearly output price of 20 million yuan and set assets a lot more than 50 million yuan.  

 

 The firm mostly manufactures screw CZPT and providing matching spare components . Specializing in the investigation and advancement manufacturing and product sales of power frequency type, frequency conversion variety, long term magnet frequency, lower voltage and transportable screw CZPT and put up -processing tools . Have deep sector qualifications, the ambition of a single stage ahead. With specialist enthusiasm for screw CZPT, crew innovation, obstacle the organization ‘s personal willpower and excellence rigorous mindset, merchandise are in strict accordance with ISO9001 international top quality procedures, to offer clients with strength conserving and trustworthy goods. Our CZPT not only sale to thirty provinces domestically, but also export to the CZPT States, India, Singapore, Australia, Saudi Arabia,South Africa,Serbia,Uzbekistan,Brazil, and other 
far more than 20 nations around the world. The organization has been a large domestically screw CZPT production foundation.
The organization is fully commited to the improvement of corporate lifestyle.All above the country’s sellers and its service market varieties the massive support networks with innovative complex electrical power and the capacity of reaction to the user’s genuine want. 
ZheJiang Sollant equipment manufacturing Co., Ltd. warmly welcome the social folks from all walks of lifestyle to visit our firm and establish a wide assortment of cooperation.
 		  

2. Our Well-liked CZPT

three. Why choose us

1.Dependability.

Continuous testing for many several years can make certain the complete trustworthiness of permanent magnet frequency conversion.
Completely sealed oil cooling shell can totally avoid dust and liquid.
Optimum performance fulfill the customer’ s need of getting the most reasonably priced repairable component.

two.CZPT preserving.

Compared with non variable speed screw CZPT,it can save fifty% vitality.
 Large displacement. variable frequency variety from OHZ to 300HZ the exhaust volume will increase as high as 28%.
Large effectiveness motor (IPM) can up to ninety four. 5%. and achieve the effectiveness amount of IE4.

three.Substantial efficiency 

In comparison with other producers in the creation of regular frequency conversion equipment . our CZPT can conserve about 6%-seven% power.
In the CZPT lifestyle cycle. the whole charges are composed of the price of purchase matainance and vitality. Frequency conversion management technique can minimize energy usage, hence minimize the total cost of CZPT .

4.New adjust

Adopting the new idea of frequency conversion CZPT accomplish the greatest energy preserving influence in this industry .
A lot more compact layout, more shut body, less noise, significantly less ground
Top the future direction of the CZPT, establishment the market CZPTs. to give buyers with the price of energy.

 

4. Our certificates

five. FAQ

Q1: Are you factory or trade business? 
A1:Yes,we are factory.Thank you.

Q2 : What’s your factory’s manufacturing potential?
A2: About one thousand units for each working day.Thank you.

Q3: Warranty terms of your equipment? 
A3: One year for entire equipment, two several years for air finish, technological assist for life.Thank you.

This autumn: Will you give some spare components of the equipment? 
A4: Sure, of course.Thank you.

Q5:In which is your factory found?
A5:Our manufacturing unit is located in ZheJiang HangZhou city which nears HangZhou port about 4 hours.Thank you.

Q6: Can you take OEM orders? 
A6: Yes, with expert design crew, OEM orders are highly welcome.Thank you.

Q7: How considerably can you help save if you get our screw CZPT?
A7: Creation of compressed air power intake might be much more thaconsumption, can significantly minimize strength intake, VS conon real gas usage, reduce the added 44% to twenty five% of the energy preserving system.

Owing to the various freight prices in each place, you are welcome to contact us for particular freight costs.

 
 

Simple Operation 11kw 8bar AC Power Compact Single Screw Air Compressor with Tank for Laser Cutting

Oil Cooling Pm Motor Special SCR20cpm Screw Air Compressor with Air Dryer for Laser Cutting

Oil Cooling Pm Motor Special SCR20cpm Screw Air Compressor with Air Dryer for Laser Cutting

Item Description
Product Title:Oil CZPT Pm Motor Particular SCR20CPM CZPT Air CZPT with Air Dryer for Laser Chopping

Design SCR20CPM-7 SCR20CPM-8 SCR20CPM-ten
Capacity/Force(m3/min,/BAR) 2.four/seven two.3/8 2/10
Motor Electricity(KW) 15KW(20H.P)
Speed(r/min) 1200/3000  1200/3000   1400/2800
Motor type Oil CZPT PM Motor
Volt(V) 380/four hundred/415(220)
Motor basic safety quality IP65
Motor isolation quality F
CZPTtrical CZPT 380(four hundred,415)V/50Hz/3Phase, 220V/60HZ/3P
Outlet Temperature(ºC) ≤ CZPT Temperature+10ºC
CZPTn way Immediate CZPTn
Sounds level at 1 meter 69±3dB(A)
CZPT strategy Aircooled
Oil articles ≤0.one
Outlet Relationship Rc 3/four
Dimension Size(mm) 1880
Width(mm) 605
Peak(mm) 1380
Weight(KG) 340

Item Characteristics
1.Taper connection,no bearing and free of charge upkeep of motor.
two.IP65 protection PM motor.
3.Intergrated PTC proctection for PM motor.
four.Higher high quality PM motor.
5.Substantial reliable PM motor provider.
6.High effectiveness airend.
7.Most current V/F inverter.
8.Straightforward servicing.
9.All in one particular style.

Merchandise Types

Positive aspects

Software

About SCR


In addition,we have exported our goods to more than 55 countries including in United kingdom, United states of america, Spain and so forth. given that 2008. And we have also set up long-phrase connection with our associate rely on our substantial quality items.
Apart from, about the once-a-year output,we can manufacture near 7,000 units compressors per 12 months, and all around thirty% are sold to oversea market. 

FAQ

1   What trade terms do we provide? What type of settlement currency do we offer you?

CZPT expression :CIF ,CFR ,FOB,Ex-Works 
As far Our business traded in Bucks ,Euros and RMB .

2   How long is our delivery?

Our CZPT delivery time is 30-forty times soon after confirmation order & receiving recipets for CZPT compressors, for the other non CZPT prerequisite will be reviewed scenario by situation.

3   What is the voltage of the compressor?

The available voltage incorporate 380V/50HZ/3Phase, 400V/50HZ/3P, 415V/50HZ/3P, 220V/60HZ/3P, 380V/60HZ/3P, 440V/60HZ/3P. At the exact same time we supply other voltage  according to buyer requirement.

4  Can our compressor run in higher temperature surroundings? What is the operating temperature selection for our device?

Of course ,our machine would run in high temperature setting ,till now our merchandise have been bought to numerous nations which would satisfy substantial temperature in summer season ,such like Iraq, Saudi Arabia, Egypt, Algeria, and so forth. 
Perform temperature variety :1-45 ºC(33.8ºF-113ºF)

5  What’s the min. Order requirement ?

Min. Purchase need is 1PCS. 

Contact us

Firm Name: ZheJiang CZPT CZPT Co., Ltd
Contact Person: Vincent Sunlight
 

If you are interested in any of our items,remember to feel free to speak to us.We are seeking forward to cooperating,increasing and building with your sincerely.

 

Oil Cooling Pm Motor Special SCR20cpm Screw Air Compressor with Air Dryer for Laser Cutting

China Manufacture 7 8 10 Bar SCR10cpm Screw Air Compressor for Laser Cutting Machine

China Manufacture 7 8 10 Bar SCR10cpm Screw Air Compressor for Laser Cutting Machine

Product Description

Merchandise Name: China CZPT seven eight 10 Bar SCR10CPM CZPT Air CZPT for Laser Slicing CZPT

Design SCR15CPM-7 SCR15CPM-eight SCR15CPM-10
Ability/Strain(m3/min,/BAR) one.seventy five/seven 1.seven/eight one.5/ten
Motor Electricity(KW) 11KW(15H.P)
Speed(r/min) 920/2300  920/2300  1060/2100
Motor sort Oil CZPT PM Motor
Volt(V) 380/400/415(220)
Motor basic safety grade IP65
Motor isolation quality F
CZPTtrical CZPT 380(four hundred,415)V/50Hz/3Phase, 220V/60HZ/3P
Outlet Temperature(ºC) ≤ CZPT Temperature+10ºC
CZPTn way Direct CZPTn
Sound level at 1 meter 68±3dB(A)
CZPT strategy Aircooled
Oil content material ≤0.one
Outlet Relationship Rc 3/4
Dimension Duration(mm) 1840
Width(mm) 605
Height(mm) 1260
Fat(KG) 320

Merchandise Features
1.Taper connection,no bearing and cost-free routine maintenance of motor.
2.IP65 safety PM motor.
3.Intergrated PTC proctection for PM motor.
4.Substantial quality PM motor.
5.High reputable PM motor provider.
6.High efficiency airend.
7.Newest V/F inverter.
eight.Easy servicing.
nine.All in 1 design and style.

Item Types

Advantages

Application

About SCR


In addition,we have exported our products to far more than 55 countries like in British isles, United states, Spain etc. considering that 2008. And we have also established lengthy-phrase partnership with our companion rely on our substantial good quality products.
Besides, about the once-a-year output,we can manufacture near 7,000 units compressors for every yr, and close to thirty% are bought to oversea marketplace. 

FAQ

1   What trade phrases do we offer? What sort of settlement currency do we offer?

CZPT time period :CIF ,CFR ,FOB,Ex-Works 
As much Our company traded in Pounds ,Euros and RMB .

2   How lengthy is our supply?

Our CZPT delivery time is thirty-40 times soon after confirmation get & receiving recipets for CZPT compressors, for the other non CZPT prerequisite will be reviewed scenario by scenario.

3   What is the voltage of the compressor?

The obtainable voltage consist of 380V/50HZ/3Phase, 400V/50HZ/3P, 415V/50HZ/3P, 220V/60HZ/3P, 380V/60HZ/3P, 440V/60HZ/3P. At the exact same time we supply other voltage  according to customer need.

4  Can our compressor operate in substantial temperature atmosphere? What is the functioning temperature range for our machine?

Of course ,our device would run in high temperature setting ,till now our merchandise have been bought to a lot of nations which would meet high temperature in summer time ,these kinds of like Iraq, Saudi Arabia, Egypt, Algeria, and so on. 
Work temperature assortment :1-forty five ºC(33.8ºF-113ºF)

5  What’s the min. Order requirement ?

Min. Order need is 1PCS. 

Contact us

Organization Identify: ZheJiang CZPT CZPT Co., Ltd
Contact Particular person: Vincent Solar
 

If you are interested in any of our items,please come to feel cost-free to contact us.We are seeking ahead to cooperating,developing and establishing with your sincerely.

 

China Manufacture 7 8 10 Bar SCR10cpm Screw Air Compressor for Laser Cutting Machine

15HP 11kw 15 Bar Variable Frequency SCR15cpm Screw Air Compressor for Laser Cutting

15HP 11kw 15 Bar Variable Frequency SCR15cpm Screw Air Compressor for Laser Cutting

Product Description

Solution Name:15HP 11kw 15 bar variable frequency SCR15CPM CZPT Air CZPT for laser slicing

Design SCR15CPM-seven SCR15CPM-8 SCR15CPM-ten
Capacity/Pressure(m3/min,/BAR) 1.seventy five/7 1.seven/eight one.5/10
Motor Energy(KW) 11KW(15H.P)
Velocity(r/min) 920/2300  920/2300  1060/2100
Motor kind Oil CZPT PM Motor
Volt(V) 380/four hundred/415(220)
Motor basic safety quality IP65
Motor isolation grade F
CZPTtrical CZPT 380(four hundred,415)V/50Hz/3Phase, 220V/60HZ/3P
Outlet Temperature(ºC) ≤ CZPT Temperature+10ºC
CZPTn way Immediate CZPTn
Sound stage at 1 meter 68±3dB(A)
CZPT strategy Aircooled
Oil material ≤0.one
Outlet Relationship Rc 3/four
Dimension Duration(mm) 1840
Width(mm) 605
Peak(mm) 1260
Fat(KG) 320

Item Functions
one.Taper relationship,no bearing and free routine maintenance of motor.
2.IP65 protection PM motor.
three.Intergrated PTC proctection for PM motor.
four.High good quality PM motor.
five.Higher reputable PM motor provider.
6.Higher effectiveness airend.
7.Most recent V/F inverter.
8.Straightforward maintenance.
nine.All in one style.

Solution Types

Benefits

Software

About SCR


In addition,we have exported our merchandise to a lot more than 55 countries such as in Uk, United states of america, Spain and many others. since 2008. And we have also proven long-term partnership with our spouse count on our higher quality products.
In addition to, about the yearly output,we can manufacture near 7,000 units compressors per yr, and all around thirty% are sold to oversea marketplace. 

FAQ

1   What trade conditions do we supply? What sort of settlement currency do we provide?

CZPT expression :CIF ,CFR ,FOB,Ex-Works 
As far Our organization traded in Bucks ,Euros and RMB .

2   How long is our delivery?

Our CZPT supply time is 30-forty times after affirmation get & receiving recipets for CZPT compressors, for the other non CZPT need will be discussed scenario by situation.

3   What is the voltage of the compressor?

The accessible voltage consist of 380V/50HZ/3Phase, 400V/50HZ/3P, 415V/50HZ/3P, 220V/60HZ/3P, 380V/60HZ/3P, 440V/60HZ/3P. At the same time we supply other voltage  according to customer prerequisite.

4  Can our compressor operate in higher temperature surroundings? What is the doing work temperature variety for our machine?

Yes ,our machine would run in higher temperature environment ,right up until now our goods have been sold to a lot of countries which would meet large temperature in summer time ,these kinds of like Iraq, Saudi Arabia, Egypt, Algeria, and so on. 
Perform temperature selection :1-forty five ºC(33.8ºF-113ºF)

5  What’s the min. Order need ?

Min. Buy requirement is 1PCS. 

Get in touch with us

Organization Identify: ZheJiang CZPT CZPT Co., Ltd
Speak to Individual: Vincent Solar
 

If you are intrigued in any of our goods,remember to truly feel totally free to speak to us.We are seeking ahead to cooperating,increasing and developing with your sincerely.

 

15HP 11kw 15 Bar Variable Frequency SCR15cpm Screw Air Compressor for Laser Cutting