Common Description
This electrical power unit characteristics a permanent magnet motor that has a electrical power up gravity down circuit. Activate the start solenoid to start out the motor to lift the machine. The lowing movement is activated from the solenoid valve with all the decreasing speed controlled from the pressure compensated movement control valve. Merchandise of this series is usually widely used in the business of logistic products this kind of as fork lift, mini lift table, and so forth.
Exclusive Notes
one. This energy unit is of S3 duty cycle, i.e.,non-continuous operation, 30 seconds on and 270 seconds off.
two. Clean all the hydraulic elements concerned prior to set up of the electrical power unit.
three. Viscosity on the hydraulic oil shoud be 15~46 cst, which should also be clean and cost-free of impurities. N46 hydraulic oil is suggested.
four. This electrical power unit is intended to be mounted vertically.
5. Check the oil degree while in the tank just after the first star with the electrical power unit.
six. Oil altering is needed following the preliminary a hundred operation hours,afterwards after each and every 3000 hrs.
7. More pump sizes and tank sizes are avaiable on request.