Tag Archives: permanent magnet compressor

Save Power 25- 40% Direct Drive Permanent Magnet VSD Screw Air Compressor Industrial Air Compressor Rotary Air Compressor

Save Power 25- 40% Direct Drive Permanent Magnet VSD Screw Air Compressor Industrial Air Compressor Rotary Air Compressor

Product features
One shaft kind structure
one. Long lasting magnet motor and airend use the embedded built-in Shaft connecting structure, far more compact, 100% transmission Efficiency.
two. No motor bearings, getting rid of the motor bearing fault details. CZPTent speeds, long lasting magnet
 
 
motor with high efficiency, Impressive vitality-saving effect
one. At rated pace point, long lasting magnet motor effectiveness is increased Than ordinary motors.
two. Below lower motor speed, permanent magnet motor can still hold high Motor effectiveness. If the gas usage considerably less, it nonetheless retains really High efficiency. Compared with common frequency conversion
three: Motor, the motor efficiency appears evident gap and the air CZPT has effective vitality preserving
It has the built-in structure, configuration of high efficiency Everlasting magnet motor, small dimensions, preserving room, simple disassembly. Deloying effective long term magnet variable frequency controllor, it Small volume, reduced sounds Can change the pace of the long lasting magnet motor according to The exhaust volume, it will achieve reduced operation noise than normal Kinds.
four. Permanent magnet motor has large performance NdFeB long term CZPT, 120 º Cwithout loss of excitation, and support daily life of above 15 Several years.
5. Stator coil adopts special inverter corona resistant enamelled wire. Insulation functionality and more time support existence.
6. Acknowledging comfortable start, the motor current will not exceed the entire load Present throughout procedure, and drastically minimize the influence on community CZPT, no hurt to electrical equipment.OSG-EZV series everlasting magnet compressor Secure procedure.

CZPT-preserving advantages:
a. Long lasting magnet motor has higher performance NdFeB long lasting CZPT, one hundred twenty º Cwithout decline of excitation, and services life of above fifteen Many years.
b. Stator coil adopts particular inverter corona resistant enamelled wire. Insulation performance and lengthier services daily life.
c. Realizing soft begin, the motor recent will not exceed the total load Present throughout procedure, and drastically minimize the impact on network CZPT, no harm to electrical tools.OSG-EZV sequence long lasting magnet compressor
CZPT-preserving benefits:
 
Condition strength conserving
1: The long term magnet motor stays higher effectiveness at lower speeds, making sure Clear vitality-conserving rewards in modest air volume.
2: Frequency variety from %-100% (widespread conversion from sixty%-100%)
3: In comparison with the mounted velocity compressor, strength preserving 22%-forty%
4: In comparison with the frequent inverter compressor, strength preserving five%-fifteen%
five: System volume fluctuations greater, then strength-conserving effect much more clearly.
6: CZPT preserving method of unloading (inverter):
According to the stationary CZPTs in gasoline use fluctuation, it has the unloading time, then the CZPT idling but also need to have forty five% of the CZPTtricity, but the long term-magnet frequency CZPT will management for CZPT, no unloading and no squander. If the CZPT models turn into more substantial,
CZPT saves far more. Conserve the wasted electric powered vitality by stress management bandwidth (vitality preserving):
Fastened compressor need to established a minimal manage strain for the 1Barg band (i. E. Air CZPT restrictions) to keep away from the impact on the device and the electricity grid. Several CZPTs should use with each other with a pressure gradient, much more broad pressure, even though the OSG long term-magnet variable-frequency Air compressor sequence is inverter handle,Unlimited stop, no want to established strain, but a force point on the line. The pressureOf every .14Barg bandwidth, the method can conserve strength 1%.
 
CZPT conserving startup (inverter):
Air compressor’ s starting up existing is three-6 instances of the rated present, the frequently CZPTt will waste a great deal of strength, and frequency conversion sort has no frequent CZPTting and stopping, but comfortable commence. The optimum current does not exceed the Rated doing work current, no power squander. At the very same time also significantly reduce the Impact on network tools, and no injury to electrical equipment OSG company has obtained a compressor manufacturing license(certification NO: XK06-571-0571), has attained a quality systemCertificate and standard machinery certificate. Solution design and style,CZPT procedures are rigid in accordance with ISO9001: 2008 top quality program CZPTs
 
 

Design:EFV-22A
Power(KW) 22KW
Horse(HP) thirty HP
Stress Bar Psi
  7 one hundred
  8 one hundred fifteen
  10 145
  thirteen 188
F.A.D m³/min L/min CFM
  three.seven 3700 a hundred thirty
  3.5 3500 124
  3.one 3100 110
  2.six 2600 92
Noise dB(A) 68±2
CZPT manner Air cooling
Long(m) × Extensive(mm) × Higher(mm) one thousand*850*1160
Excess weight (kg) 520
Diameter of outlet 1″

 
 

Professional service
After-sale service is always one of the most concerned question, and 
right after-sale service in time is the key. We have Professional after sale 
service engineers and complete spare parts. The following branches 
serve every customer to provide timely and professional service and 
technical training.
 
Adequate supply of resources
Use OSG genuine spare parts and consumables is the basic guarantee for air compressor running long. 
We have the normal and efficient operation, also plenty of spare parts and consumables reserve, ready 
to meet the needs of customers.
 
Product quality guarantee
 High quality products are the core foundation of business operation. 
Any product from raw material purchasing, outsourcing parts processing to the process after the 
performance and operation of strict tests ensure the machines of high quality.

Application field
pharmacy, package, electronic, communication, cement, glasses, chemical, textile, paper making, gas, and oil refining, heavy industry ,chemical industry,CNG,construction industry,dairy industry ,electron industry , medical,  steel industry ,CZPT, pharmaceutical materials, power, electronic, spraying, tobacco, instruments, food processing, feed processing, machinery processing, oil field,CZPT ,CNC Machining,SLA/SLS Making, CZPTing ,CZPT Injection CZPT,,Glass creating ,steel, electrical
electricity, metallurgy, shipbuilding, electronics, textile, mining, chemical industry, petroleum, light-weight industry, papermaking, printing, machinery producing, foods, drugs, transportation, casting coating, shipping dock, the automotive market, military industry, aerospace, infrastructure and other fields of science and technology etc.

 
Why we choose Honest?
one: CZPTean owned company superb engineering and credit history,trustworthy products.
2: Big CZPTean exhaust airend,guarantee the effectiveness,economic system and toughness of the device.
3: Patent oil-gasoline separation system that oil articles ≤3ppm.it is imported from CZPTe.
4: Layout of body-less box structure is unique,allow your set up,,maintenance and repair function actually barrier free of charge.
five: Centrifugal super exhaust technique is especially suited for large temperature setting of China.
six: CZPT handle system is accurate,do what you want,Every item reflects the design notion of “reputable ,strength conserving,environmental protection,practical”
 
Competitive Advantage:
one: 1 shaft type composition.
2: CZPTent speeds, long term magnet motor with high effectiveness,
Remarkable energy-saving impact.
3: Modest volume, low sound.
4: Stable operation.
5: CZPT-preserving
.

Save Power 25- 40% Direct Drive Permanent Magnet VSD Screw Air Compressor Industrial Air Compressor Rotary Air Compressor

High Quality USA Free Shipping Permanent Magnet Frequency Conversion Air Compressor

High Quality USA Free Shipping Permanent Magnet Frequency Conversion Air Compressor

Item description

Positive aspects

Air stop
one. Germany Rotorcomp air stop, German engineering, degree 1 vitality performance CZPT.
2. IP55 defense for entirely enclosed motor, reducing the concealed hazard of dust being captivated by the motor’s magnetic metal.
3. No electric excitation start.
four. Using higher-grade magnetic steel,180°c temperature resistance. IE3 CZPT-successful Motor.

Motor
one.Productive design and style, SKF bearings, make certain the prolonged life of the motor.
two.IP54 safeguarded completely enclosed motor, fret-free of charge in harsh problems operate.
3.Common stage sequence protection to stop reversal.

Big Contact Grasp Controller
1.Matching inverter distinctive customization.
2.Liquid crystal display Chinese and English switch display.
three.Abundant self-diagnostic features these kinds of as fault alarm, routine maintenance reminder, automatic shutdown, and many others.
four.Clock operate, can established timing change.
5.Numerous sign outputs: RS485 port.

CZPT
one.ABB / Siemens brand name vector management frequency conversion technique, frequency conversion reaction speed is more quickly.
2.Continuous force output to get rid of strain fluctuation and off-load.
3.Constant temperature output at 9~85°C, Minimal starting current to safeguard factors,15% power-conserving.

Pre-filter CZPT
1.Special pre-filter cover design and style to keep the inside of the equipment clean and lengthen the maintenance cycle.
two.Effortless to disassemble and clear, and can be reused.

Successful CZPT Method
1.Adopting big-dimension large-performance cooler to cope with severe doing work problems.
2.Undertake independent huge enthusiast mixed with oil cooling technique, lower temperature and much more stable.

CZPTtrical Method
one.Standardized design, safe and reliable.
two.Professional wiring interface,the wiring is sensible, easy, very clear and simple to maintain.,
3.Schneider and Siemens are outfitted with a collection of large-level parts, and their protected use is confirmed for a long time.

Direct CZPT
one.one: one immediate travel, stable and successful.
two.Adopts far more experienced break up-kind direct push, which is far more reliable and simpler to sustain than integrated travel.
3.CZPTed brand name, large measurement coupling to make sure the long daily life of the push system.

Adaptable
For some places with bad working situations this kind of as higher temperature and high humidity,massive-location plate warmth exchangers and substantial-performance air coolers are utilised.

Exhaust pipe
The exhaust pipe adopts double-layer bellows,and the oil passage adopts unique temperature resistance of 125 °C high-stress hose.

CZPT Parameters

Model Volume circulation (m3/min) Electricity(kW) Noise(db) Outlet diameter Dimension(mm) Weight(kg)
6bar 7bar 8bar 10bar 13bar Lenght Width Top
DM-10A / one.three one.2 1 / seven.5 63 G3/four 895 590 970 a hundred ninety
DM-20A 2.fifty five two.4 two.3 2. / 15 sixty five G3/4 1062 690 a thousand 236
DM-30A 4.five four.fifteen three.7 three.2 / 22 68 G1 1330 830 1265 410
DM-40A six five.seven five.two / / 30 68 G1 1330 830 1265 520
DM-50A 7.35 six.9 6.five 5.six 4.9 37 69 G1 1/2 1500 940 1415 655
DM-60A eight.7 eight.1 seven.five 6.seventy five 5.9 forty five 70 G1 1/two 1500 940 1415 730
DM-75A 11.two 10.3 nine.five / seven.8 55 70 G2 1600 1060 1470 950
DM-100A thirteen.6 thirteen twelve.8 11 nine.five 75 seventy two G2 2000 1120 1590 1070
DM-125A 17.two 16.7 15.five 14. twelve.five 90 72 G2 2000 1120 1590 1221
DM-150A 21.five 20.8 19.six 17.eight fifteen.5 one hundred ten 72 DN65 2400 1630 1980 1950
DM-175A 24.six 24.one 23.2 19.five 17 132 seventy two DN65 2400 1630 1980 2150
DM-220A thirty.2 28.eight 27.8 23. 20 160 seventy two DN80 2800 1828 2150 3620
DM-250A 34.nine 33.2 31.two 27.5 25.eight 185 72 DN80 2800 1828 2150 3920
Motor Performance Class:   CZPTefficient/IE3/IE2 as for every your necessary.
Motor CZPT Class:   IP23/IP54/IP55 or as per your essential.
Certification:  CE/ISO9001/TUV/UL/SGS/ASME.
Voltage:  380V/3PH/50HZ/60HZ,   220V/3PH/50HZ/60HZ,   400V/3PH/50HZ/60HZ,   440V/3PH/50HZ/60HZ,   415V/3PH/50HZ/60HZ,   230V/3PH/50HZ/60HZ,  dual voltage is also alright.

Certificate

Venture Scenario

Air compressors belong to the common tools classification and are broadly utilised in metal, electric electrical power, metallurgy, shipbuilding, textiles, electronics, chemicals, petroleum, mining, gentle sector, machinery production, paper printing, transportation services, foodstuff and medicine, casting and spraying, delivery terminals, Military technologies, automotive technologies, automotive sector, aerospace, infrastructure and other fields.

Buyer Opinions

CZPT and CZPT

• Packing Information: Plywood crate pallet additionally foam board and bubble movie, Full closed wood circumstance. 1pcs/every deal (for stationary screw CZPT)

• CZPT approach: by sea, by LCL/FCL or as asked for

• Supply technique: FOB, CFR, CIF and EXW and so forth.

• Shipping time: in seven-15 times right after getting deposit (CZPT devices not provided)

Organization Profile

CZPT CZPT was founded in 1996 with more than a hundred and fifty expert staff and far more than 25 R&D engineers’ groups.We emphasis on the research & build, manufacture and energy-preserving solutions of screw CZPT to produce worth for clients and modern society. 

CZPT opened to the planet because 2015, and now we have a foreign trade section with a lot more than dozens folks, serving consumers all around the entire world 24 hours. We have revenue representatives who can communicate English, Spanish, Portuguese, French,and Russian which helps make it less difficult for our customers from all above the planet to interact and negotiate with us.now our valued buyers are in excess of 130 nations. Germany Normal and thirteen several years exporting expertise support us received a lot more than 50 faithful overseas agents.

CZPT continuously innovates merchandise development and administration to meet customers’ demand. The effective organization tradition and ongoing innovation make CZPT improved quickly to get to the business principle “CZPT Preserving Initial, Mutual Benefit CZPTd”. The production line of DEHAHA is consist of screw CZPT from 5.5KW to 550KW, oil totally free CZPT, transportable CZPT, long term magnet variable frequency CZPT, higher stress CZPT and compressed air purification equipment,and so on.

CZPT mission is to be a planet-renowned substantial-conclude manufacturer, with sustainable development, constantly strengthening its very own value and sharing it with our customers and staff. Committed to offer you our consumers a silent and energy-preserving manufactured goods.

Our Support

After-sale Support

• Any questions or requests before, for the duration of or right after sales, we would like to help you any time and will find you the very best resolution in 24 hrs.
• Warranty: One particular year for the total machine CZPT spare parts will be offered with the best cost.
• An overboard engineer services is available.

 Overseas Engineer Provider
• We are obtainable to send our engineer for aboard support. Only require you to set up accommodation, transportation, and translator. The further expense for every will be discussed based mostly on the neighborhood price tag amount.

Unique CZPT Service

(one) Full OEM
• Quantity: at least five pcs
• In this prepare, we will do all the changes (Color, nameplate, and emblem) as your need to have, and will not demand extra payment.

(two) Half OEM
• Amount: no limit
• Beneath this software, we can make the essential alteration (nameplate and symbol) but we will cost some extra charge for the nameplate, as the nameplate factory has the MOQ.

(3) Brand OEM
• Quantity: no limit
• Only the symbol will be altered to yours, and no extra price will be charged.

Why pick us?

one.CZPT Guarantee
With a lot more than 24 many years business experience and our compressor authorized by CE, ISO9001, SGS, And TUV check.The raw materials are strictly inspected and Some essential parts are imported from overseas.Each and every compressor have to go at least 5 hours of continuous tests just before leaving the manufacturing facility.

2.Guarantee Time period
The full devices are proviede with one-year guarantee, and the compressor air stop with Two-year warranty and lifetime upkeep(With the exception of wearing parts)

three. Set up and Commissioning
Provied customers with installation and commissioning directions,and all support-delivering staff are strictly educated technically by our company.

4.Soon after -sales Providers
Our company has service community in planet, offering prompt replies to consumers right after notified inside of 24~48hours for troubleshooting.

5.Spare Components
Our company usually supply spare parts on most favorable phrases.

FAQ

Q1. Are you investing firm or manufacture ?
A: We are expert manufacture of screw CZPT of HangZhou(Near to ZheJiang ), China, a lot more than 24 many years.

Q2. How long is the delivery time ?
A: For CZPT voltage ,fifteen working days. Non-CZPT ,make sure you make contact with our income.

Q3. What is payment expression ?
A: T/T, L/C, D/P, CZPT CZPT, Paypal, Credit history Card, and etc. Also we could accept USD, RMB, Euro and other currency.

This fall. How about your following-revenue service ?
A: 1.Provide customers with installation and commissioning on-line directions.
      2. Properly-educated engineers available to overseas services.
      3.Throughout the world brokers and right after service avaiable.prepare our engineers to aid you education and set up.

Q5. How about your warranty?
A: One yr for the total equipment and two many years for screw air conclude, other than consumable spare components.

Q6. Do you have any certification ?
A: Indeed, for every diverse customer’s marketplace need to have ,we can offer you CE ,ISO etc certificate.

Q7. What about the upkeep ?
A: 1st maintenance want to be carried out following 500Hours, and then every 2000-3000 several hours to do the typical servicing, and contemplate the true environment.

Q8. How do you management quality ?
A: 1.The uncooked resources are strictly inspected
      2. Some key components are imported from overseas
      3.Each and every compressor have to go at least 5 hours of continuous screening just before leaving the factory.

Q9. Do you offer OEM services ?
A: Yes.Both OEM & ODM provider can be recognized.

Q10.How long could your CZPT be utilized?
A: CZPTly, much more than 10 years.

High Quality USA Free Shipping Permanent Magnet Frequency Conversion Air Compressor

Two stage oil injected permanent magnet danfoss compressor

Two stage oil injected permanent magnet danfoss compressor

CZPT variety CZPT structure of a unique design, a compact, fashionable visual appeal, higher effectiveness, small vitality usage, minimal noise traits and lengthy existence, is a smart environment-helpful goods. Widely used in metallurgy, equipment, chemical substances, and mining, and electric powered electrical power industries of the perfect gasoline resource products.     
 
Advantage:

one.The third era of innovative rotor and concise ingestion control technique

2.Efficient centrifugal separator oil and gas, gasoline oil content is tiny,tube and main of long life . 

three. Efficient, lower sounds suction supporter of the total use of export dynamic pressure 
    increased impact of heat transfer (air-cooled) 

four. CZPT h2o-cooling system for large CZPT to supply more efficient 

five.Fault analysis program, the handle panel is straightforward to operate 

6. Removable door, equipment routine maintenance, provider convenient 

seven.Micro-digital processing so that temperature, force and other parameters are carefully monitored .

CZPT Parameters:

            Model           Discharge Stress Discharge Air Quantity Motor Energy Dimension(mm) Discharge Pipc.Dia Device Excess weight
SPY35HY 1.6MPa 1.0m³/min 15KW 720X720X1120 1X1″ 260KG
SPY35EY .8MPa one.0m³/min 7.5KW 650X590X1060 1X3/four” 165KG
SPY55EY .8MPa one.5m³/min 11KW 720X720X1120 1X1″ 200KG
SPY75EY .8MPa two.3m³/min 15KW 236KG
SPM140 .8MPa four.0m³/min 22KW 1250X850X1225 1X1″ 375KG
1.0MPa 3.6m³/min
SPM210 .8MPa 6.5m³/min 37KW 1380X1050X1325 1X1-one/four” 600KG
one.0MPa 5.7m³/min
SPM245 .8MPa seven.5m³/min 45KW 2000X1220X1555 1X2″ 1100KG
one.0MPa 6.8m³/min
SPM350 .8MPa ten.5m³/min 55KW 2000X1220X1555 1X2″ 1300KG
one.0MPa eight.9m³/min
one.3MPa seven.6m³/min
SPM420 .8MPa 13.5m³/min 75KW 2000X1220X1555 1X2″ 1500KG
one.0MPa 11.5m³/min
1.3MPa ten.1m³/min
SPM565 .8MPa 16.5m³/min 90KW 2350X1765X2060 DN65 2200KG
one.0MPa thirteen.7m³/min
1.3MPa 12.1m³/min
SPM710 .8MPa twenty.5m³/min 110KW 2350X1765X2060 DN65 2500KG
one.0MPa seventeen.9m³/min
one.3MPa 15.8m³/min
SPM780 .8MPa 24.0m³/min 132KW 2350X1765X2060 DN65 2900KG
1.0MPa 21.3m³/min
1.3MPa 19.6m³/min
SPM1060 .8MPa thirty.0m³/min 160KW 3420X2220X2130 DN80 4000KG
one.0MPa 26.0m³/min
1.3MPa 22.0m³/min
SPM1165 .8MPa 32.0m³/min 185KW 3420X2220X2130 DN80 4200KG
one.0MPa 28.0m³/min
one.3MPa twenty five.0m³/min
SPM1270 .8MPa 35.0m³/min 200KW 3540X2440X2290 DN100 4900KG
1.0MPa 31.0m³/min
1.3MPa 27.0m³/min
SPM1420 .8MPa 41.0m³/min 250KW 3540X2440X2290 DN100 5100KG
one.0MPa 39.0m³/min
1.3MPa 35.0m³/min

Product HIGHLIGHTS

one.The brand energy,trustworthy high quality, steady overall performance.
   The harsh thermal equilibrium serviceability can guarantee that the device function successfully beneath substantial temperature environment  (≤40ºC)

two.Special patent layout, gentle load startup program

three.Productive cooling system, divided into a few elements: h2o- cooled ,mid- cold, oil cold, which guarantee the    reliable procedure of diesel motor, and it really is appropriate for large temperature working surroundings

4.Impartial investigation and development of the reverse door style, rational structure, which is simple to do normal maintenace ,with benefits of the fixed and transportable compressor

five.A solitary level lifting, forklift gap device, outfitted with drag ring.It is suitable for repair auto transport,effortless to transfer and installation of the device

six.Water-resistant and dustproof style, which is ideal for out of doors hard functioning atmosphere

seven.According to consumer demands, the heating boiler and remote parts is accessible for chilly starting

Merchandise Programs:

Our Exhibition

Our support

one.Pre-sale provider:

Act as a good adviser and assistant of customers enable them to get abundant and generous returns on their investments . 
1.Choose gear design.
two.Style and manufacture items in accordance to client’s special need  
three.Prepare technical personnel for clientele .

2.Providers throughout the sale:

1.Pre-check out and take products ahead of shipping and delivery .
2. Support consumers to draft resolving strategies .

three.Right after-sale providers:

Provide thoughtful solutions to reduce clients’ concerns.
one.CZPT Right after-sales services,skilled engineers accessible to services machinery at house or oversea.
2. 24 hrs technical support by e-mail.
3.Other important technological support.

Make contact with information:

 

Two stage oil injected permanent magnet danfoss compressor

22kw 30HP Two Stage Permanent Magnet Variable Frequency Air Compressor for Automobile Industry

22kw 30HP Two Stage Permanent Magnet Variable Frequency Air Compressor for Automobile Industry

Item Description

Two phase air stop
Attribute:Two-stage compressor air-stop
Edge:Minimal compression ratio, Low temperature rising, Low air leakage
Benefit:15% energy-conserving

Large-performance Motor
Characteristic:IE4 everlasting magnet motor/IE4 Large-effectiveness motor
Advantage:Motor performance 97%
Advantage:5% energy-conserving

CZPT management
Function:VFD method
Gain:Constant pressure output to eliminate strain fluctuation and off-load, Continuous temperature output at nine-~85°C, Reduced starting up present to shield parts
Benefit:fifteen% energy-preserving

Wise exhibit screen
Feature:CZPT manage program
Benefit:10 inch keep an eye on to show all the day
Gain:Straightforward procedure and touble totally free

CZPT enthusiast
Function:Massive cooler system
Benefit:Axial stream Fan utilised for good cooling influence
Reward:Let ambient temperature at 52°C

Systematic Layout of Oil separator
Function:Large oil technique
Advantage:Decrease internal strain loss keep away from oil, Leakage for safety
Gain:3% energy-conserving

CZPT
Attribute:Double filtering technique
Advantage:Take away impurity from air and cleanness
Gain:CZPT daily life air -conclude and lubrication oil

Air inlet valve
Feature:Substantial vacuum degree:700mmHg
Advantage:Large suction location, Low load power consumption in unloaded operation, 
CZPT examine: prevent unloading and shutdown oil injection
Gain:Forged aluminum to stay away from rust and temperature adjust

CZPT Parameter

1.energy frequency

CZPTL Air flow Capacity (m³/min)

Power 

(kW)

Noise 

(DB)

Outlet 

Diameter

Dimension ( mm)

Weight 

(Kg)

.6Mpa .7Mpa .8Mpa 1.0Mpa one.3Mpa
DD-seventy five fifteen.80  fourteen.70  thirteen.00  nine.50  eight.60  fifty five 70 DN50 2300x1300x1830 1534
DD-a hundred eighteen.80  17.40  15.50  12.80  ten.00  75 72 DN50 2300x1300x1830 1700
DD-one hundred twenty five 21.30  twenty.70  19.50  sixteen.50  13.00  ninety seventy two DN65 2550x1630x1850 2080
DD-150 26.50  26.30  twenty five.00  twenty.00  18.80  a hundred and ten 72 DN65 2550x1630x1850 2120
DD-one hundred seventy five 34.00  32.60  30.00  24.00  twenty.00  132 78 DN80 3000x1828x2310 4850
DD-220 forty one.00  38.00  37.00  29.60  24.50  one hundred sixty seventy eight DN80 3000x1828x2310 5000
DD-250 forty four.00  41.00  40.00  34.00  31.00  185 78 DN100 3460x1940x2230 5900
DD-275 48.00  forty four.00  forty five.00  forty.00  33.00  200 78 DN100 3460x1940x2230 6200
DD-275 fifty five.00  51.00  fifty.00  43.00  38.00  220 80 DN125 3860x2130x2380 8500
DD-350 60.00  fifty seven.00  56.00  forty seven.00  43.00  250 eighty DN125 3860x2130x2380 8650 

2.Long term magnet

 MCZPTL Air flow Capacity (m³/min) Power  (kW)

Noise 

(DB)

Outlet 

Diameter

Dimension (mm) Fat (Kg)
.7Mpa .8Mpa one.0Mpa 1.3Mpa
DDM-sixty 10.five 10.3  seven.3  6.1 forty five 70 G2 1834*1290*1810 1353
DDM-75 13.six twelve.3  10.2 7.0  55 70 DN50 2300*1300*1830 1534
DDM-100 16. fifteen.5  12.8  10.two seventy five 72 DN50 2300*1300*1830 1700
DDM-a hundred twenty five 20.seven 19.5  sixteen.2  thirteen.two ninety seventy two DN65 2550*1630*1850 2080
DDM-150 24.eight 24.0  20.2  fifteen.two 110 seventy two DN65 2550*1630*1850 2120
DDM-175 29. 28. 23.2 18.7 132 78 DN80 2800*1828*2150 4850
DDM-220 34. 33.5 28. 23.three one hundred sixty seventy eight DN80 2800*1828*2150 5000
DDM-250 39. 38. 33.five 27.7 185 78 DN100 4100*1960*2000 5900
DDM-275 43. 42.five 38.3 33.3 two hundred seventy eight DN100 4100*1960*2000 6200
DDM-300 51.5 47. 42.four 38.three 220 eighty DN125 4260*2155*2170 8500
DDM-350 54. fifty one. 45.8 forty one.four 250 80 DN125 4260*2155*2170 8650

Certificate

Venture circumstance

Buyer suggestions

About us

CZPT CZPT was established in 1996 with more than a hundred and fifty skilled personnel and more than twenty five R&D engineers’ groups.We target on the investigation & build, manufacture and power-saving solutions of screw CZPT to generate value for clients and society.

CZPT opened to the world given that 2015, and now we have a overseas trade division with much more than dozens men and women, serving buyers around the planet 24 several hours. We have income associates who can speak English, Spanish, Portuguese, French,and Russian which helps make it simpler for our clients from all more than the globe to interact and negotiate with us.now our valued clients are in excess of one hundred thirty countries. Germany Standard and thirteen many years exporting encounter support us gained more than 50 faithful abroad agents.

CZPT continuously innovates product advancement and administration to meet up with customers’ demand from customers. The effective company society and continuous innovation make CZPT enhanced rapidly to achieve the enterprise basic principle “CZPT Saving Initial, Mutual Worth CZPTd”. The creation line of DEHAHA is consist of screw CZPT from 5.5KW to 550KW, oil totally free CZPT, moveable CZPT, long term magnet variable frequency CZPT, high force CZPT and compressed air purification equipment, and so on.

CZPT mission is to be a world-renowned high-stop brand, with sustainable growth, continually bettering its very own benefit and sharing it with our clients and staff. Fully commited to supply our customers a silent and strength-preserving created items.

Our support

1.24/seven after income service support in distinct languages.
two.Adhere to up the opinions of products in 2 months interval by e-mail or call.
three.Guidance of set up and commissioning on website can be presented by factory-qualified specialists or local Approved Support Middle.
four.CZPT training for consumers in DEHAHA CZPT manufacturing unit or doing work website.
five.Plenty of CZPT spare parts with verified top quality are all obtainable from our central stocks in CZPTsu and all distributors’depots. 
six.All sorts of technical documents in different languages.

FAQ

one.Why consumer pick us? 
DHH SCREW CZPT ZheJiang CO.,LTD.with 23 many years old background,we are specialized in Rotary CZPT Air CZPT.Germany Normal and thirteen a long time exporting experience support us won much more than thirty faithful international agents.We warmly welcome your tiny trial buy for good quality or industry test.

two.Are you a manufacturer or trading company?
We are specialist manufacturer with massive present day manufacturing facility in HangZhou,China,with professional style team.Each OEM & ODM support can be acknowledged.

3.Where is your factory positioned? How can I visit there?
Our factory is found in HangZhou City, CZPTsu CZPT, China. We can choose up you from ZheJiang , it truly is about 1 hour from ZheJiang CZPT Airport to our manufacturing unit. Warmly welcome to visit us!

4.What’s your shipping time?
380V 50HZ we can shipping and delivery the merchandise within fourteen days. Other electrical power or other colour we will shipping and delivery within 22 times,if urgently order,pls speak to our product sales in progress.

five.How extended is your CZPT guarantee?
One year for the whole machine and two many years for screw air finish, other than consumable spare elements and we can provide some spare parts of the devices

six.How does your manufacturing facility do concerning good quality management?
CZPT is everything. we often attach fantastic value to high quality managing from the really beginning to the really stop. Our manufacturing facility has gained ISO9001:2015 authentication and CE certification.

7.How lengthy could your CZPT be utilized?
CZPTly, more than ten many years.

8. What’s payment phrase?
T/T,L/C,D/P,CZPT CZPT,Paypal,Credit score Card,and etc.Also we could settle for USD, RMB, Euro and other forex.

nine.How about your customer support?
24 hrs on-line support accessible.forty eight hours difficulty solved assure.

10.How about your after-product sales service?
(one) Offer customers with set up and commissioning on the web directions.
(2) Effectively-skilled engineers available to overseas services.
(3) Throughout the world brokers and after provider available. 

22kw 30HP Two Stage Permanent Magnet Variable Frequency Air Compressor for Automobile Industry

20HP-150HP 1.3-20.8m3 Min 15kw-110kw 50Hz 60Hz 8bar 10bar Single Phase Permanent Magnet Frequency Conversion Rotary Screw Air Compressor

20HP-150HP 1.3-20.8m3 Min 15kw-110kw 50Hz 60Hz 8bar 10bar Single Phase Permanent Magnet Frequency Conversion Rotary Screw Air Compressor

                                                                              

Product Mix of 20HP-150HP 1.3-20.8m3/Min 50HZ/60HZ 8bar 10bar Single Section Permanent CZPT Frequency Conversion Rotary CZPT Air CZPT

Transient Introduction:
Air end: Germany CZPT. 30 a long time made life time.
Motor: one hundred% rare earth long lasting magnet motor. 
CZPT: can preserve at the very least 30% energy with Chinese No. one inverter.
Warranty: 5 many years for the air end, and 2 a long time for the total compressor. 
Supply time:
seven-thirty times. 
Following-sales provider:we have our skilled following-income technician to instruct the set up of the total screw CZPT.   
Motor Electricity: 20HP-150HP(15KW-110KW)  
Doing work Pressure: 7 – 30bar (a hundred – 435psi)
Air Shipping: 1.eight-20.8m3/Min(63-728CFM)
Type of Driving: Direct CZPTn
Variety of CZPT: Air CZPT/Drinking water CZPT
Sound: 69dB
Measurement: 1100*800*980mm
Bodyweight: 430kg    

Product Air Stream (m³/min) Motor Power Noise Outlet Diameter Dimension Weight
7bar 8bar 10bar 13bar kw dB inch W*D*H  (mm) kg
YV-10A 1.one 1. .85 .seven 7.five 65 G1” 960*680*960 280
YV-15A 1.eight 1.65 1.five one.3 11 65 G1” 1050*830*1240 380
YV-20A 2.four two.2 two.1 1.eight fifteen 68 G1” 1050*830*1240 380
YV-25A 3.one three. 2.seven 2.three eighteen.5 68 G1” 1200*830*1290 480
YV-30A three.8 three.6 3.two two.5 22 68 G1” 1200*830*1290 480
YV-40A 5.3 5. four.three three.six 30 sixty nine G11/2” 1300*a thousand*1540 710
YV-50A six.6 6.2 five.seven 4.six 37 69 G11/2” 1300*1000*1540 710
YV-60A eight. 7.7 6.9 six. 45 70 G11/2” 1500*1160*1700 990
YV-75A ten.five nine.8 eight.seven seven.three 55 70 G11/2” 1500*1160*1700 990
YV-100A 13.6 13. eleven.three 10.1 seventy five 72 G2” 1700*1180*1800 1300
YV-125A sixteen.2 15.4 thirteen.two eleven.2 90 72 DN50 1850*1200*1900 1400
YV-150A twenty.8 19.five sixteen.five thirteen.7 one hundred ten seventy three DN65 2250*1260*2055 1560
Remarks:
1. operating ambinent temperature: -5ºC-45ºC
two. exhausting air temperature ≤  doing work ambinent temperature +10ºC-15ºC
three. beginning mode: Y-△
four. exhausting oil content material: <3ppm
5. certification:  CE/ISO9001/ASME
6. voltage:  380V/220V/400V/440V/415V

Merchandise Details of 20HP-150HP 1.3-20.8m3/Min 50HZ/60HZ 8bar 10bar Solitary Period Long term CZPT Frequency Conversion Rotary CZPT Air CZPT

Main Parts of 20HP-150HP one.3-twenty.8m3/Min 50HZ/60HZ 8bar 10bar Solitary Period Long lasting CZPT
Frequency Conversion Rotary CZPT Air CZPT

Advantages:
one.German imported technological innovation air conclude helps make positive the thirty several years desgined lifetime.
2. Factory immediate-offering with decrease price to support you conserve the payment throughthe agent or buying and selling business.
three. CZPT CZPTed core spare elements, such as electrical handle program,electromagnetic valve, and ects. to make confident the
ample air offer, and the lifestyle-time of the CZPT.
4. Full copper coil motor to make positive the high effectiveness.
five. CZPT-tranquil layout to make the sounds below 68dB
6. Shock Absorbers design and style to decrease the products harm
seven.Oil-fuel tank with German technology to make sure the oil material is significantly less than 3ppm.

Our Certificates:
one. ISO9001
2. SGS
3. CE 
4. twelve patents for screw compressor.

F.A.Q

Q1. Why do buyers choose us?
Yunshun CZPTtric CZPTry Co., Ltd. is a company specializing in screw air compressor for 18 years since 2001. Our German Standard production line helps us get the affirmation from our agents as nicely as finish-person clients.

Q2. Are you a manufacturer or trading company?
We are a professional manufacturer with big modern factory in HangZhou,China.
Both OEM & ODM service can be approved.

Q3. What’s your delivery time?
CZPTly 7-15 days, if urgent order, we can prepare, as well.

Q4. How long is your air compressor warranty?
two year for the whole machine and 5years for screw air end, apart from consumable spare parts.

 Q5. How long could your air compressor be used for? 
At least 10 years.

Q6. What’s payment term?
T/T, L/C, CZPT CZPT, Credit Card, and and many others.

Q7. How about your customer service?
24 hrs on-line service for all our clientele.

Q8. How about your after-sales service?
one. Providing customers with installation on-line guidelines.
2. Properly-educated engineers accessible to abroad services.
3. PlHangZhou for oversea following-product sales supporting company.

 

 

20HP-150HP 1.3-20.8m3 Min 15kw-110kw 50Hz 60Hz 8bar 10bar Single Phase Permanent Magnet Frequency Conversion Rotary Screw Air Compressor

15kw Permanent Magnet Variable Speed Inveter Integrated Screw Air Compressor for Laser Cutting Machine

15kw Permanent Magnet Variable Speed Inveter Integrated Screw Air Compressor for Laser Cutting Machine

15kw Long term CZPT Variable Velocity Inveter Built-in CZPT Air CZPT for Laser Reducing CZPT

 

CZPT Application:

Really great price and prime high quality  for your selection ! much more information ,remember to speak to us 
Oil free / oil significantly less dental Air compressor is mainly dental room, health care room and so forth
Attributes
1. Both 100 % copper and aluminium coil wire are obtainable.
2. Compact, light-weight, east to carry. Suit for cell,
three. Oil free of charge oilless silent collection, get 100% purity pressed air

Specifics:

Certifications:

Packing Element:
Every Air compressor with plastic movie package deal 1st, then placed in a picket scenario, wooden circumstance with a foam filling.
We loaded the truck with large trucks for loading the cargo to the harbor terminal.At the dock we pack the products in containers
and ship them overseas.
Shipping and delivery Detail:
Shipped in 30 days right after payment

Our Service :
Pre-sales.
* Task style, overall performance introduction, technological arrangement, agreement signing, packaging * Inquiry and consulting assistance.
* Sample tests assist.
In-income. * We will give you with the most current progress in the solution assembly, packaging and transportation.
Following-revenue.
* We will provide cost-free accessories for the harm to non – human components. * Training how to put in the equipment, coaching how
to use the device with online video and so on * And our specialized staff can go overseas to give technological direction.

Our Company:

Our workshop:

Buyer & EXPO:

FAQ:
1. Are you the manufacture?Can we pay a visit to your factory? We are manufacturer and we are found in ZheJiang ,China.And we have our
very own design and style team for products design. And welcome you pay a visit to our factory and check our equipment qualtiy on place,any query will
be solved on place at 1st time.

two.What is your main product and what is your primary foreign marketplace? Our primary products are press brake,shears machine,press,lower
ting machine,locking equipment ,auto duct line and related merchandise. Our major foreign market are Asia, North CZPTica, CZPTe, Afr
ica.

three. What are the benefits of your equipment?And how can i feel the good quality of your item? The major configuration is to im
port quality products, and Specialist merchandise high quality inspection teamensure machine in leading-quality, precision and daily life. For exam
ple,Germany Bosch-CZPT Valve team,Germany Siemens Primary Motor,Schneider CZPTtrics program and so on. Once analyzed as q
ualified .our machine would be despatched out.So The good quality of our item is steady and dependable.

four. And are you in a position to update the production procedure Details in time following inserting our order? Soon after confirming your get ,we
would maintain you up to date of creation details of emails and images.

five. Can we be your agent? Of course,we are searching for Global agent we will aid agent increase the market ,and supply all the support
like device specialized issue or other soon after-product sales problem, meanwhile ,you can get massive low cost and commission.

6. Payment terms? T/T, L/C, CZPT CZPT, Paypal, Alibaba Protected Payment ect. Consumer pays 30% by T/T to commence this buy, res
t 70%paid before shipment.

seven.Are you give solution steel elements and supply us technological direction? Putting on areas,Disassembly resource(free of charge) are what we cou
ld give.And we can give you specialized advice.Our technological personnel can go overseas to supply you with technical advice.

8. How lengthy is your warranty? 13 months totally free guarantee, existence-lengthy maintenance.

nine.Do you take customer Symbol and CZPT ?we settle for sorts of CZPT ,like brand and machine .

Speak to details:

 

15kw Permanent Magnet Variable Speed Inveter Integrated Screw Air Compressor for Laser Cutting Machine

Crownwell Two-Stage Oil-Injected Permanent Magnet Variable Speed Compressor

Crownwell Two-Stage Oil-Injected Permanent Magnet Variable Speed Compressor

 

CZPT Oil-Injected Rotary CZPT CZPTs

 CWD seven-four hundred & CWD 7-400 PM
Energy output: 7-400 kW / ten-five hundred hp
Supply charge: .eight-71.two m3/min / 28-2514 cfm
Pressure assortment: seven-thirteen bar / one hundred-190 psig

CZPT CZPT – Greatest STHangZhouRD

SIMPLICITY BUT NOT Straightforward

For three generations, buyers from mechanical engineering, market and trade have relied on CZPT know-how when it arrives to plHangZhou, creating and producing compressed air programs. They are totally conscious of the simple fact that CZPT AIR is a lot more than just normal compressed air: utmost protection, excellent performance, excellent quality, maximized overall flexibility together with dependable service are the elements to transform CZPT AIR into air to operate with – in China, in Asia and in far more than 102 nations around the globe.

The III technology, the basis for affordable compressed air creation

The Know-How
Much more than many years of know-how in production for the compressed air market place. Planet vast expertise in diverse compressed air apps have guided the growth of consumer specified stationary screw compressors.

CZPT Development for your Reward
The benefit of CZPT lies in its simplified development. Fewer elements are used. This means a 60% reduction in principal and putting on parts and more than 70% less pipes and connections. In turn, this tremendously reduces the danger of leakages, making the technique environmentally pleasant. Secure immediate push procedure with out V-belt transmission.

The CZPT CZPT CZPT performs in the pursuing way:
Ambient air is drawn by way of the ingestion filter and the multifunctional management system into the screw compressor block. This block consists of a pair of screw rotors. The primary rotor, driven by an electric motor, will take the CZPTary rotor with it. The air is drawn in by the rotation of the two of the interlocking rotors and is continually compressed. During rotation, coolant is injected into the rotors and varieties a hydrostatic movie in between the primary and CZPTary rotors. The perform of the coolant is to seal the rotors, lubricate the bearings and adsorb the compression heat. Prior to compressed air leaves the compressor ( at eighty ºC approx.) it is divided from the coolant before becoming cooled in the aftercooler to approx.. 8ºC to 12ºC earlier mentioned the ambient temperature. The coolant then passes to the thermostatic handle block and filter, ahead of coming into the cooler in which it is cooled from approx.. 80ºC down to 50ºC. It is then injected again into the screw compressor block.

Features:
Immediate travel by means of adaptable coupling.
Completely encapsulated CZPT screw compressor block.
Regular electric powered motor CZPT Index IP23 and IP54.
Consumer friendly service access.
Leading high quality, washable, oil resistant audio insulation.
Ready for procedure, prewired and fully enclosed.
With operating method selector swap CZPT-Off-Ongoing.
Centrally mounted cooling fan offered for compressed air and lubricant coolers.
Compact and neat cupboard design and style.

Optional CZPT:
Sense of rotation
Multiple unit control with automated base load choice
Full motor security
Mains isolator switch for wall mounting

CZPT these features we offer you a vast choice of compressed air add-ons in reference to our compressor item variety.
CZPT Restoration Methods CZPT-THERM
Compressed Air CZPTs
Compressed Air Dryers
Condensate Traps
Oil-Water Separators
Compressed Air Receivers

 

CZPT OIL-INJECTED Long lasting MAGNET Variable Speed CZPT

Complex Specs CWD seven-400 PM
(7.5-400kW / ten-500hp)
 

Design Motor Power
kW / hp
Free of charge Air Shipping
m3/min
Sounds Stage
dB(A)
Dimension
L * W * H
mm
Excess weight
Kg
7barg 8barg 10barg   13barg
CWD7 PM 7.5 / ten one.3 1.2 1.   .eight 66 760*seven-hundred*920 two hundred
CWD11 PM eleven / 15 1.7 1.six 1.four   one.2 68 980*750*1000 350
CWD15 PM 15 / 20 2.5 2.three 2.one   1.nine sixty eight 980*750*1000 360
CWD18 PM 18.five / twenty five 3.2 3. two.seven   two.four 68 1120*850*1160 five hundred
CWD22 PM 22 / thirty 3.8   3.6 3.two 2.8 sixty eight 1120*850*1160 520
CWD30 PM thirty / forty five.3 5. 4.5   4. sixty eight 1120*850*1160 550
CWD37 PM 37 / 50 6.eight 6.two 5.6   five. sixty eight 1280*one thousand*1290 750
CWD45 PM forty five / 60 eight. seven.three 7.   5.nine 72 1280*a thousand*1290 780
CWD55 PM fifty five / seventy five ten.one nine.five eight.7   7.eight 72 1800*1230*1570 1600
CWD75 PM 75 / 100 thirteen.6 12.8 12.3   ten.2 72 1800*1230*1570 1800
CWD90 PM ninety / 125 16.2 15.five 14.   twelve.five 72 1800*1230*1570 1900
CWD110 PM one hundred ten / one hundred fifty 21.two 19.8 seventeen.8   15.five 72 2400*1470*1840 2500
CWD132 PM 132 / one hundred eighty 24.5 23.two 20.five   17.8 75 2400*1470*1840 2700
CWD160 PM one hundred sixty / 215 28.8 27.eight 25.   22.4 75 2400*1470*1840 3000
CWD185 PM 185 / 250 32.five 31.2 28.   25.eight 75 3150*1980*2150 3500
CWD200 PM 200 / 270 36. 34.3 30.5   28. eighty two 3150*1980*2150 4000
CWD250 PM 250 / 350 43. 41.five 38.2   34.9 82 3150*1980*2150 4500
CWD315 PM 315 / 400 fifty one. 50.2 forty four.five   39.five eighty two 3150*1980*2150 6000
CWD355 PM 355 / 450 sixty four. 61. fifty six.5   49. eighty four 3150*1980*2150 6500
CWD400 PM four hundred / 500 seventy one.two sixty eight.one sixty two.8   fifty two.two 84 3150*1980*2150 7200
  • Unit functionality measured in accordance to ISO 1217, Annex C, Edition 4 (2009)

Reference conditions:
-Relative humidity %
-Complete inlet stress: 1 bar (a) (fourteen.five psi)
-Consumption air temperature:  20°C, 68°F

  • Noise level calculated according to ISO 2151:2004, operation at max. working stress and max. velocity tolerance: ±3 dB(A)
  • PM-Long lasting CZPT

CZPT TWO-Phase OIL-INJECTED PERMANENT MAGNET Variable Velocity CZPT

Specialized Specifications CWD 7-400 PM
(7.five-400kW / ten-500hp)
 

Model Motor Energy
kW / hp
Free of charge Air Delivery
m3/min
Sounds Stage
dB(A)
Dimension
L * W * H
mm
Fat
Kg
7barg 8barg 10barg 13barg
CWD15II-PM fifteen / twenty 3. two.9 2.4 2.two 68 1480*850*1180 780
CWD18II-PM eighteen.5 / 25 three.6 3.five two.nine 2.five 68 1480*850*1180 800
CWD22II-PM 22 / thirty 4.two four.one three.five three.2 68 1480*850*1180 820
CWD30II-PM thirty / forty six.five 6.4 4.nine 4.two 68 1720*1110*1480 1080
CWD37II-PM 37 / 50 seven.two seven.1 six.three 5.four sixty eight 1720*1110*1480 1100
CWD45II-PM 45 / 60 nine.8 9.7 seven.8 6.five 72 1720*1110*1480 1120
CWD55II-PM fifty five / seventy five twelve.eight 12.five nine.6 8.six 72 2100*1350*1720 2080
CWD75II-PM 75 / one hundred 17.5 16.5 12.5 eleven.two seventy two 2100*1350*1720 2100
CWD90II-PM ninety / 125 20.eight 19.8 16.9 14.three seventy two 2460*1700*1900 3280
CWD110II-PM one hundred ten / one hundred fifty 24.five 23.five 19.7 seventeen.six seventy two 2460*1700*1900 3480
CWD132II-PM 132 / one hundred eighty thirty. 28. 23.5 19.8 75 2900*1800*2571 3980
CWD160II-PM 160 / 215 34.5 33.six thirty. 23.8 seventy five 2900*1800*2571 4280
CWD185II-PM 185 / 250 41. 38.4 32.5 28.6 75 3800*1980*2150 5450
CWD200II-PM two hundred / 270 44.six 43. 38.5 32.8 eighty two 3800*1980*2150 5600
CWD220II-PM 220 / three hundred 48.six forty seven. forty one. 38. eighty two 3800*1980*2150 6500
CWD250II-PM 250 / 350 55. fifty four. 46. 40. eighty two 3800*1980*2150 6600
  • Unit performance measured in accordance to ISO 1217, Annex C, Version four (2009)

Reference situations:
-Relative humidity %
-Absolute inlet force: 1 bar (a) (fourteen.five psi)
-Consumption air temperature:  20°C, 68°F

  • Sounds stage calculated in accordance to ISO 2151:2004, operation at max. running strain and max. velocity tolerance: ±3 dB(A)
  • II-Two Phase, PM-Permanent CZPT

 

Crownwell Two-Stage Oil-Injected Permanent Magnet Variable Speed Compressor

Industrial New Design Germany Technology Permanent Magnet Energy Saving VSD Screw Type Air Compressor

Industrial New Design Germany Technology Permanent Magnet Energy Saving VSD Screw Type Air Compressor

01 Functions Of long term CZPT Variable Frequency Air CZPT

It is a unique new layout, which combines the long lasting magnet motor and the speed control frequency converter. It couples with the high top quality air conclude, which shows the innovative screw compressor technological innovation.

1.CZPT-lower temperature increase design and style, which enables the compressor running at extremely-low frequency for a extended time.

two.Closed-loop vector manage system for more rapidly handle and more specific pace manage.

3.The compressor unit can nevertheless function effectively when the frequency is diminished by far more than fifty%.

4.The force is stable and the force fluctuation is precisely managed inside of .one bar.

5.The determine displays a comparison of many beginning techniques. It can be observed that the frequency converter is slowly and gradually accelerated to start off, the beginning is far more secure, and the current peak is entirely avoided.

02 Air End

A lot more steady, no mechanical transmission failure: large-efficiency everlasting magnet synchronous motor and screw male rotor undertake embedded-built-in shaft direct link framework, no equipment transmission, totally eliminate gear pitting or damaged tooth Two unbiased long lasting magnet motors are integrated right travel two air ends, no coupling failures.

Much more strength effective, the air finish is always operating at strength-saving speed.

A lot more productive and efficient long lasting magnet motor + no transmission effectiveness reduction.

A lot more relaxed, minimal managing sound, getting rid of three resources of sound: no-click bearing sounds, no equipment meshing noise, no coupling push noise.

Much more compact: The everlasting magnet motor is tiny in size and the built-in construction saves area.

Underneath the established frequency conversion strain, the device will automatically modify to preserve the output strain inside of ± .one bar, reducing unneeded squander (the energy consumption raises by 7% for every 1 bar of pressure enhance)

.3 Positive aspects of Long lasting CZPT CZPT In comparison to CZPT Asynchronous CZPT

Substantial performance: Gets rid of excitation program losses and improves performance.

It is still successful beneath lower load situations: the power efficiency of a long lasting magnet motor is much more than nine% increased than that of a standard asynchronous motor at total load procedure, and its strength effectiveness remains unchanged as the velocity decreases.

Big overdrive torque: The ratio of the maximum commencing torque of the long lasting magnet synchronous motor to the rated torque can be a lot more than 3 times, although the basic asynchronous motor is only 1.six times.

The control is a lot more secure: the corresponding time of the long term magnet motor is <50ms, and the gas production can be adjusted in a large range in an instant, so that the gas pressure is truly stable.

CZPT Parameters

Model No.

Power 

(kw/hp)

Strain

Capacity   

(m3/min)

CZPT 

Approach

CZPTting 

Program

Noise

Air

Outlet

Dimension (mm) Fat
DM-10A seven.5/ten 8 bar 1.two Oil cooling Frequency 63 G3/four” 895*590*970 190
DM-20A fifteen/twenty 7bar two.4 65 G3/4″ 1062*690*1000 236
8 bar 2.three
10 bar two.2
DM-30A 22/30 7bar three.7 68 G1″ 1330*830*1265 410
8 bar 3.six
10 bar 3.2
DM-40A 30/40 7bar five.one sixty eight G1″ 1330*830*1265 520
8 bar five.
10 bar /
DM-50A 37/fifty 8 bar 6.5 sixty nine G1 1/two” 1500*940*1415 655
10 bar five.six
13 bar 4.five
DM-60A forty five/sixty 7 bar 8.1 70 G1 1/2″ 1500*940*1415 730
8 bar seven.5
13bar 5.9
DM-75A fifty five/75 7 bar 10.3 70 G2″ 1600*1060*1470 950
8 bar 9.five
13 bar 7.eight
DM-100A seventy five/one hundred 7 bar 13 Air cooling seventy two G2″ 2000*1120*1590 1070
8 bar 12.eight
10 bar eleven
13 bar nine.five
DM-125A ninety/a hundred twenty five 7 bar sixteen.33 seventy two G2″ 2000*1120*1590 1221
8 bar 13.65
10 bar fourteen
13 bar twelve.5
DM-150A one hundred ten/a hundred and fifty 7 bar 20.8 72 DN65 2400*1630*1980 1950
8 bar 19.six
10 bar 17.8
13 bar fifteen.5
DM-175A 132/one hundred seventy five 7 bar 24.one 72 DN65 2400*1630*1980 2150
8 bar 23.two
10 bar 19.five
13 bar seventeen
DM-220A 160/220 7 bar 28.five 72 DN80 2600*1700*1980 3620
8 bar 27.five
10 bar 23
13 bar twenty
DM-250A 185/250 7 bar 33.two 72 DN80 2600*1700*1980 3920
8 bar 31.2
10 bar 27.5
13 bar 25.eight

Notes:
1.A represents air-cooling type
2.Working CZPT temperature: 2ºC~45ºC
3.CZPTtup Method: frenquency start 
four.Function Energy: 380V / 50HZ/3P 4 wire kind.
five.F.A.D volume circulation examination is in accordance to ASMC PTC9 or ISO1217 CZPT (GB/T3853)

Certification

Venture scenario

Customer opinions

CZPT and CZPT

• Packing Information: Plywood crate pallet plus foam board and bubble movie, Total shut wood circumstance. 1pcs/each and every deal (for stationary screw CZPT)

• CZPT method: by sea, by LCL/FCL or as asked for

• Shipping method: FOB, CFR, CIF and EXW and so on.

• Shipping and delivery time: in seven-15 days right after getting deposit (CZPT equipment not incorporated)

Firm Profile

CZPT CZPT was established in 1996 with in excess of one hundred fifty expert workers and much more than twenty five R&D engineers’ teams.We concentrate on the study & produce, manufacture and vitality-saving answers of screw CZPT to produce value for buyers and modern society.

CZPT opened to the entire world considering that 2015, and now we have a overseas trade office with more than dozens individuals, serving clients all around the world 24 hrs. We have income reps who can converse English, Spanish, Portuguese, French,and Russian which can make it simpler for our clientele from all above the globe to interact and negotiate with us.now our valued customers are over a hundred thirty countries. Germany Normal and 13 several years exporting expertise help us received much more than 50 loyal abroad brokers.

CZPT repeatedly innovates item growth and administration to fulfill customers’ demand. The effective business culture and constant innovation make CZPT improved rapidly to attain the organization basic principle “CZPT Conserving Very first, Mutual Benefit CZPTd”. The production line of DEHAHA is consist of screw CZPT from 5.5KW to 550KW, oil cost-free CZPT, transportable CZPT, long lasting magnet variable frequency CZPT, large stress CZPT and compressed air purification gear, etc.

CZPT mission is to be a world-renowned large-finish model, with sustainable development, consistently bettering its own benefit and sharing it with our consumers and personnel. Committed to offer you our clients a silent and vitality-saving manufactured items.

Our services

one.24/7 soon after income service support in various languages.
two.Comply with up the feedback of products in 2 months interval by electronic mail or phone.
3.Assistance of installation and commissioning on site can be presented by factory-trained professionals or nearby Approved Services Middle.
four.CZPT instruction for clients in DEHAHA CZPT factory or operating internet site.
5.Loads of CZPT spare areas with proven high quality are all offered from our central shares in CZPTsu and all distributors’depots. 
6.All types of technological documents in diverse languages.

After-sale Support

• Any queries or requests prior to, during or right after revenue, we would like to aid you any time and will discover you the very best remedy in 24 hrs.

• Guarantee: One calendar year for the whole machine CZPT spare parts will be presented with the greatest price.

• An overboard engineer provider is offered.
 

Particular CZPT Provider

1) Full OEM

• Quantity: at least 5 pcs

• In this prepare, we will do all the alterations (Color, nameplate, and emblem) as your need to have, and will not charge further charge.

two) Fifty percent OEM

• Amount: no limit

• Below this software, we can make the needed alteration (nameplate and brand) but we will demand some extra price for the nameplate, as the nameplate manufacturing facility has the MOQ.

3) Symbol OEM

• Quantity: no restrict

• Only the symbol will be altered to yours, and no additional fee will be billed.
 

Abroad Engineer Provider

• We are available to send out our engineer for aboard services. Only need to have you to set up accommodation, transportation, and translator. The further cost for each and every will be talked about primarily based on the local cost stage.

FAQ

one.Why consumer pick us?
DEHAHA CZPT ZheJiang CO.,LTD.with 24 a long time outdated heritage,we are specialised in Rotary CZPT Air CZPT.Germany Regular and 13 years exporting experience assist us gained a lot more than thirty faithful foreign agents.We warmly welcome your little trial buy for good quality or market check.

2.Are you a producer or trading business?
We are specialist producer with big modern factory in HangZhou,China,with expert style staff.Equally OEM & ODM support can be recognized.

3.Where is your factory located? How can I check out there?
Our manufacturing facility is located in HangZhou City, CZPTsu CZPT, China. We can choose up you from ZheJiang , it truly is about one hour from ZheJiang CZPT Airport to our manufacturing unit.Warmly welcome to go to us!

4.What is your shipping time?
380V 50HZ we can delivery the items inside fourteen days. Other electric power or other coloration we will delivery within 22 times,if urgently get,pls contact our sales in progress.

5.How lengthy is your CZPT guarantee?
One year for the entire machine and two several years for screw air finish, apart from consumable spare areas and we can supply some spare elements of the devices.

six.How does your manufacturing unit do with regards to good quality control?
CZPT is every little thing. we usually attach great value to high quality controlling from the very starting to the quite end. Our manufacturing facility has gained ISO9001:2015 authentication and CE certification.

seven.How long could your CZPT be employed?
CZPTly, far more than ten several years.

eight. What is payment phrase?
T/T,L/C,D/P,CZPT CZPT,Paypal,Credit Card,and etc.Also we could accept USD, RMB, Euro and other currency.

nine.How about your consumer support?
24 several hours on-line support accessible.48 several hours issue solved assure.

ten.How about your soon after-revenue service?
(1) Give customers with installation and commissioning on-line recommendations.
(2) Properly-educated engineers available to abroad support.
(three) Globally brokers and right after support accessible.

Industrial New Design Germany Technology Permanent Magnet Energy Saving VSD Screw Type Air Compressor

Crownwell Oil-Injected Permanent Magnet Compressor

Crownwell Oil-Injected Permanent Magnet Compressor

 

CZPT Oil-Injected Rotary CZPT CZPTs

 CWD 7-400 & CWD 7-four hundred PM
Power output: seven-four hundred kW / ten-500 hp
Delivery fee: .8-seventy one.two m3/min / 28-2514 cfm
Pressure variety: seven-13 bar / 100-190 psig

CZPT CZPT – Optimum STHangZhouRD

SIMPLICITY BUT NOT Easy

For 3 generations, consumers from mechanical engineering, market and trade have relied on CZPT know-how when it arrives to plHangZhou, creating and manufacturing compressed air methods. They are completely aware of the reality that CZPT AIR is more than just normal compressed air: utmost security, outstanding efficiency, outstanding top quality, maximized adaptability together with trustworthy services are the ingredients to change CZPT AIR into air to work with – in China, in Asia and in more than 102 nations all around the entire world.

The III era, the basis for economical compressed air creation

The Know-How
A lot more than decades of know-how in producing for the compressed air market. World broad information in different compressed air apps have guided the growth of customer specified stationary screw compressors.

CZPT Development for your Advantage
The edge of CZPT lies in its simplified building. Less factors are used. This implies a sixty% reduction in primary and wearing parts and above 70% less pipes and connections. In turn, this tremendously lowers the chance of leakages, making the technique environmentally friendly. Risk-free immediate generate procedure without V-belt transmission.

The CZPT CZPT CZPT operates in the adhering to way:
Ambient air is drawn through the intake filter and the multifunctional manage program into the screw compressor block. This block is made up of a pair of screw rotors. The primary rotor, driven by an electric motor, requires the CZPTary rotor with it. The air is drawn in by the rotation of each of the interlocking rotors and is continually compressed. For the duration of rotation, coolant is injected into the rotors and types a hydrostatic movie among the major and CZPTary rotors. The perform of the coolant is to seal the rotors, lubricate the bearings and adsorb the compression heat. Just before compressed air leaves the compressor ( at eighty ºC approx.) it is separated from the coolant ahead of currently being cooled in the aftercooler to approx.. 8ºC to 12ºC above the ambient temperature. The coolant then passes to the thermostatic manage block and filter, just before moving into the cooler exactly where it is cooled from approx.. 80ºC down to 50ºC. It is then injected back into the screw compressor block.

Functions:
Immediate push via versatile coupling.
Fully encapsulated CZPT screw compressor block.
Standard electric powered motor CZPT Index IP23 and IP54.
Consumer friendly services accessibility.
Top top quality, washable, oil resistant sound insulation.
All set for operation, prewired and totally enclosed.
With working method selector change CZPT-Off-Constant.
Centrally mounted cooling admirer presented for compressed air and lubricant coolers.
Compact and neat cabinet layout.

Optional CZPT:
Sense of rotation
A number of device handle with computerized base load choice
Full motor defense
Mains isolator switch for wall mounting

CZPT these functions we supply a extensive decision of compressed air equipment in reference to our compressor item variety.
CZPT Recovery Programs CZPT-THERM
Compressed Air CZPTs
Compressed Air Dryers
Condensate Traps
Oil-Drinking water Separators
Compressed Air Receivers

 

CZPT OIL-INJECTED Permanent MAGNET CZPT

Technical Technical specs CWD 7-four hundred PM
(7.five-400kW / 10-500hp)
 

Model Motor Power
kW / hp
Cost-free Air Shipping
m3/min
Sound Degree
dB(A)
Dimension
L * W * H
mm
Bodyweight
Kg
7barg 8barg 10barg 13barg
CWD7 PM seven.5 / ten one.3 one.two 1. .eight sixty six 760*seven hundred*920 two hundred
CWD11 PM 11 / fifteen 1.seven 1.6 one.4 1.two 68 980*750*one thousand 350
CWD15 PM fifteen / 20 2.5 2.three 2.one 1.9 sixty eight 980*750*one thousand 360
CWD18 PM eighteen.5 / twenty five three.two three. two.seven 2.4 sixty eight 1120*850*1160 five hundred
CWD22 PM 22 / 30 three.8 three.6 3.2 two.8 sixty eight 1120*850*1160 520
CWD30 PM 30 / 40 five.3 5. 4.five four. 68 1120*850*1160 550
CWD37 PM 37 / fifty six.8 six.2 5.6 five. sixty eight 1280*1000*1290 750
CWD45 PM 45 / sixty 8. 7.three seven. five.9 seventy two 1280*a thousand*1290 780
CWD55 PM 55 / seventy five ten.one 9.5 eight.7 seven.8 72 1800*1230*1570 1600
CWD75 PM 75 / 100 thirteen.six twelve.8 twelve.three ten.two 72 1800*1230*1570 1800
CWD90 PM 90 / a hundred twenty five 16.2 15.five 14. 12.five 72 1800*1230*1570 1900
CWD110 PM 110 / one hundred fifty 21.two 19.eight seventeen.8 fifteen.5 72 2400*1470*1840 2500
CWD132 PM 132 / one hundred eighty 24.five 23.two 20.five 17.8 seventy five 2400*1470*1840 2700
CWD160 PM one hundred sixty / 215 28.eight 27.eight 25. 22.4 75 2400*1470*1840 3000
CWD185 PM 185 / 250 32.5 31.2 28. twenty five.8 75 3150*1980*2150 3500
CWD200 PM 200 / 270 36. 34.three thirty.5 28. 82 3150*1980*2150 4000
CWD250 PM 250 / 350 forty three. forty one.5 38.2 34.nine 82 3150*1980*2150 4500
CWD315 PM 315 / 400 51. 50.two forty four.5 39.five eighty two 3150*1980*2150 6000
CWD355 PM 355 / 450 sixty four. sixty one. fifty six.five 49. eighty four 3150*1980*2150 6500
CWD400 PM 400 / five hundred 71.two 68.one 62.eight 52.2 eighty four 3150*1980*2150 7200
  • Unit performance measured in accordance to ISO 1217, Annex C, Version four (2009)

Reference problems:
-Relative humidity %
-Absolute inlet stress: 1 bar (a) (fourteen.5 psi)
-Ingestion air temperature:  20°C, 68°F

  • Noise degree calculated according to ISO 2151:2004, procedure at max. working strain and max. speed tolerance: ±3 dB(A)
  • PM-Everlasting CZPT

 

Crownwell Oil-Injected Permanent Magnet Compressor

High Efficiency Energy Saving Two Stage Permanent Magnet Screw Air Compressor

High Efficiency Energy Saving Two Stage Permanent Magnet Screw Air Compressor

Product description

Two Stage Permanent CZPT Large Performance CZPT Preserving CZPT Air CZPT 

Rewards

Two phase air finish
Attribute:Two-phase compressor air-end
Benefit:Reduced compression ratio, Low temperature climbing, Reduced air leakage
Reward:fifteen% vitality-conserving

Higher-effectiveness Motor
Attribute:IE4 everlasting magnet motor/IE4 Large-effectiveness motor
Advantage:Motor effectiveness ninety seven%
Advantage:five% energy-conserving

CZPT handle
Characteristic:VFD system
Benefit:Consistent pressure output to remove stress fluctuation and off-load, Consistent temperature output at 9-~85°C, Lower starting recent to protect factors
Benefit:fifteen% energy-saving

Sensible screen monitor
Function:CZPT handle system 
Gain:ten inch monitor to present all the day
Advantage:Simple operation and touble free

CZPT fan
Feature:Massive cooler program
Edge:Axial circulation Enthusiast employed for great cooling influence
Advantage:Let ambient temperature at 52°C

Systematic Style of Oil separator
Function:Massive oil method
Gain:Minimize inner stress reduction steer clear of oil, Leakage for security
Benefit:3% strength-conserving

CZPT
Feature:Double filtering system 
Edge:Remove impurity from air and cleanness
Reward:CZPT existence air -finish and lubrication oil

Air inlet valve
Characteristic:Substantial vacuum diploma:700mmHg
Gain:Large suction area, Minimal load power consumption in unloaded operation, 
CZPT examine: avert unloading and shutdown oil injection
Advantage:Solid aluminum to keep away from rust and temperature adjust

CZPT parameter
 

 Model Air flow Capacity m³/min Power
(kW)
Sound
 (DB)
Outlet 
Diameter
Dimension(mm) Fat
(kg)
.7Mpa .8Mpa one.0Mpa one.3Mpa Size Width Top
DDM-thirty 4.60  4.50  3.80  two.80 22 68 G11/four 1484 1126 1578 840
DDM-forty six.63  6.50  four.50  four.00 30 68 G11/four 1630 1214 1660 1050
DDM-fifty 7.65  seven.50  6.00  / 37 sixty eight G11/four 1630 1214 1660 1050
DDM-sixty 10.50  ten.30  seven.30  six.ten 45 70 G2 1834 1290 1810 1353
DDM-75 14.70  thirteen.00  nine.50  seven.00 fifty five 70 G2 2300 1300 1830 1780
DDM-a hundred 17.40  fifteen.50  12.80  ten.twenty seventy five 72 G2 2300 1300 1830 2000
DDM-a hundred twenty five 20.70  19.50  15.00  thirteen.twenty ninety 72 DN65 2550 1630 1850 2080
DDM-a hundred and fifty 24.80 25.00  20.00  15.twenty one hundred ten 72 DN65 2550 1630 1850 2120
DDM-a hundred seventy five 29.00 28.00 23.twenty eighteen.70 132 78 DN80 2800 1828 2150 4850
DDM-220 34.00 33.fifty 28.00 23.30 160 seventy eight DN80 2800 1828 2150 5000
DDM-250 39.00 38.00 33.50 27.70 185 78 DN100 4100 1960 2000 5900
DDM-275 forty three.00 42.fifty 38.thirty 33.thirty 200 seventy eight DN100 4100 1960 2000 6200
DDM-three hundred fifty one.fifty forty seven.00 42.forty 38.30 220 eighty DN125 4260 2155 2170 8500
DDM-350 fifty four.00 51.00 45.eighty 41.forty 250 eighty DN125 4260 2155 2170 8650
Motor Effectiveness Class:   CZPTefficient/IE3/IE2 as per your needed.
Motor CZPT Class:   IP23/IP54/IP55 or as per your required.
Certification:  CE/ISO9001/TUV/UL/SGS/ASME.
Voltage:  380V/3PH/50HZ/60HZ,   220V/3PH/50HZ/60HZ,   400V/3PH/50HZ/60HZ,   440V/3PH/50HZ/60HZ,   415V/3PH/50HZ/60HZ,   230V/3PH/50HZ/60HZ,  dual voltage is also ok.

Certification

Software CZPT

Air compressors belong to the basic products classification and are broadly utilised in metal, electric powered electrical power, metallurgy, shipbuilding, textiles, electronics, substances, petroleum, mining, light market, equipment production, paper printing, transportation services, meals and drugs, casting and spraying, shipping terminals, Navy technology, automotive technological innovation, automotive industry, aerospace, infrastructure and other fields.

Task Scenario

Air compressors belong to the general products category and are broadly employed in metal, electric powered energy, metallurgy, shipbuilding, textiles, electronics, substances, petroleum, mining, light industry, equipment manufacturing, paper printing, transportation facilities, meals and medication, casting and spraying, shipping terminals, Military technological innovation, automotive engineering, automotive market, aerospace, infrastructure and other fields.

Buyer Pay a visit to

Client Comments

CZPT and CZPT

Our staff pack the tested CZPTs in picket circumstances. Soon after the packaging is finished, the CZPT will be transported to the port and then transport to the world.

Company Profile

CZPT CZPT was founded in 1996 with more than 150 skilled staff and a lot more than twenty five R&D engineers’ teams.We emphasis on the study & develop, manufacture and strength-conserving answers of screw CZPT to develop price for customers and modern society. 

CZPT opened to the entire world considering that 2015, and now we have a overseas trade section with a lot more than dozens individuals, serving buyers about the globe 24 hours. We have sales associates who can communicate English, Spanish, Portuguese, French,and Russian which makes it easier for our clientele from all more than the world to interact and negotiate with us.now our valued buyers are above 130 nations. Germany Regular and 13 several years exporting encounter help us won a lot more than fifty faithful overseas brokers.

CZPT continually innovates solution growth and administration to satisfy customers’ demand from customers. The strong organization culture and constant innovation make CZPT enhanced swiftly to attain the organization theory “CZPT Preserving First, Mutual Price CZPTd”. The generation line of DEHAHA is consist of screw CZPT from five.5KW to 550KW, oil totally free CZPT, moveable CZPT, long term magnet variable frequency CZPT, large pressure CZPT and compressed air purification equipment,and so forth.

CZPT mission is to be a world-renowned large-conclude brand, with sustainable advancement, constantly enhancing its very own worth and sharing it with our buyers and workers. Committed to provide our customers a silent and vitality-conserving manufactured items.

Our Provider

1.24/seven soon after income services support in distinct languages.

2.Comply with up the feedback of items in two months interval by e mail or phone.

three.Direction of set up and commissioning on website can be presented by manufacturing unit-trained experts or regional Licensed Support Heart.

4.CZPT education for clients in DEHAHA CZPT factory or doing work site.

5.Plenty of CZPT spare parts with proven good quality are all accessible from our central shares in CZPTsu and all distributors’depots. 

6.All types of technological documents in different languages.

FAQ

Q1. Are you investing organization or manufacture ?
A: We are skilled manufacture of screw CZPT of HangZhou(Shut to ZheJiang ), China, more than 24 years.

Q2. How prolonged is the supply time ?
A: For CZPT voltage ,fifteen working days. Non-CZPT ,make sure you get in touch with our product sales.

Q3. What is payment expression ?
A: T/T, L/C, D/P, CZPT CZPT, Paypal, Credit history Card, and etc. Also we could settle for USD, RMB, Euro and other currency.

Q4. How about your after-revenue services ?
A: 1.Provide consumers with installation and commissioning on the internet recommendations.
      2. Well-skilled engineers available to overseas provider.
      3.Globally agents and soon after provider avaiable.set up our engineers to aid you training and installation.

Q5. How about your warranty?
A: One particular 12 months for the whole machine and two years for screw air end, except consumable spare elements.

Q6. Do you have any certificate ?
A: Of course, per various customer’s industry require ,we can offer CE ,ISO and so forth certificate.

Q7. What about the servicing ?
A: First maintenance want to be carried out following 500Hours, and then every 2000-3000 hrs to do the typical maintenance, and consider the real setting.

Q8. How do you management good quality ?
A: 1.The raw supplies are strictly inspected
      2. Some essential elements are imported from abroad
      3.Every single compressor have to go at least five hrs of constant testing ahead of leaving the manufacturing unit.

Q9. Do you offer OEM provider ?
A: Yes.The two OEM & ODM services can be approved.

Q10.How extended could your CZPT be used?
A: CZPTly, much more than 10 many years.

High Efficiency Energy Saving Two Stage Permanent Magnet Screw Air Compressor