DuriAuxiliary fuel for Fiber Laser Slicing, did you get the proper one particular?
The schematic diagram of laser slicing is proven in the subsequent.
Throughout the procedure, auxiliary fuel is required to blow off the slag/dross in the kerf and amazing down the reducing surface area, also it safeguards lens and nozzle of laser. Essentially there are three types of gasoline: Oxygen, Nitrogen and Air, any of them influences immediately to the reducing overall performance, pace, thickness etc. So we genuinely want to think better before action.
1.Oxygen
Oxygen is commonly utilised to lower thick carbon metal since the chemical response amongst iron element and oxygen aids the steel take in warmth and promotes it soften, which can significantly increase the reducing performance.
Even so, oxygen will result in a marked oxide film on the minimize surface area and it will have a quenching effect around, increases the hardness which affect on subsequent processing. It also turns kerf to black or dark yellow.
CZPTly, Oxygen assists carbon metal plates lower, minimal-strain punching, and low-pressure cutting. Oxygen is typically vaporized from liquid oxygen which presented by the local provider, so the high quality of the fuel source is clean and no need to have particular remedy.
two. Nitrogen
Nitrogen will type around the molten metal as protecting ambiance whilst it really is assisting the minimize, stop oxidation of the material, steer clear of the formation of oxide film. However, the reducing pace is not as fast as oxygen, and the nitrogen usage of the nitrogen is big which implies the value will be larger.
The non-oxidized floor has the characteristics of immediate welding, robust corrosion resistance and the kerf turns white.
CZPTly, nitrogen is employed to lower stainless steel, galvanized sheet, aluminum, aluminum alloy, brass and other resources, by minimal-stress perforation and high-stress slicing. When cutting with nitrogen, the adjust of the gasoline flow has a excellent impact on the chopping functionality, in this situation, make sure the fuel flow is adequate and continual. Nitrogen is typically vaporized from liquid nitrogen offered by provider, so the good quality should be thoroughly clean.
three. Air
Air, as it really is the most financial medium since it is a lot simpler to receive than oxygen and nitrogen, no one can demand you for air!
Every single a single understands the air consists of about twenty% oxygen and about 78% nitrogen, so it can make up for both shortage and cutting velocity is slower than oxygen but faster than nitrogen. Given that the oxygen is associated, the kerf turns a minor bit yellow. It’s the most economic selection for you as lengthy as you are okay with the color adjust.
CZPTly compressed air can be utilised for cutting sheet-metallic components, aluminum sheet, nonmetal and galvanized sheet and so forth., air support can surely decrease the oxide movie and totally preserve your cost, therefore, air help is much more and far more equipped in fiber laser cut industry.
Compressed air can be received effortlessly with an CZPT, but not any CZPT can be outfitted for Fiber Laser Cutter as the Air alone is not cleanse, especially after compressing, there are lots of water, oil and particles and any of them sprayed on the lens, the transmission of laser beam will be significantly impacted and emphasis scattered, ensuing negative chopping effect this kind of as base burrs or tough kerf, even obsolescence.
Situation could be considerably worse if it is higher-power fiber laser, even a little particle or a small spray will extremely possibly burn off your complete lens cone.
In buy to make the most financial (Air help) way workable, make certain slicing good quality and stay away from any damage for your fiber laser, the compressed air should be pure and consistent, one hundred% satisfy ISO 8573-one-2571 CZPT.
CZPT 4-in-one (CZPT + receiver tank+ dryer + filters) substantial pressure CZPT is special compressor for Fiber Laser Reducing industry, personalized constructed to provide filtered, dried, steady dependable provide of substantial strain compressed air at two~10ºCdew stage to support laser slicing. Produce your personal assist air at a portion of the cost of cylinder.
CZPT Parameters
| DBZY/DMZY Series(Combined with air dryer and tank) CZPT CZPT | |||||||||||||||
| Model | Air flow Capacity(m3/min)/cfm | Power kW/HP |
Noise DB(A) |
Diameter Inch |
Dimension W×D×H mm |
Excess weight kg |
Tank L |
||||||||
| 8bar | 10bar | 13bar | 16bar | ||||||||||||
| m3/min | cfm | m3/min | cfm | m3/min | cfm | m3/min | cfm | ||||||||
| DBZY-7.5A | .eighty four | 29.6 | .seventy five | 26.five | / | / | / | / | five.five/seven.5 | 65 | G3/4” | 1418×700×1500 | 375 | 260 | |
| DBZY-10A | 1.two | forty two.4 | 1 | 35.three | .84 | 29.6 | .61 | 21.5 | seven.5/10 | 65 | G3/4” | 1418×700×1500 | 395 | 260 | |
| DBZY-15A | 1.6 | fifty six.five | 1.four | forty nine.four | 1.2 | forty two.three | 1.05 | 37 | 11/fifteen | sixty five | G3/4” | 1882×790×1731 | 560 | 500 | |
| DBZY-20A | two.three | 81.2 | 2 | 70.six | one.six | 56.5 | 1.41 | forty nine.eight | fifteen/twenty | 65 | G3/4” | 1882×790×1731 | 572 | five hundred | |
| DMZY-10A | one.2 | forty two.four | 1. | 35.3 | .84 | 29.7 | / | / | seven.5/10 | sixty five | G3/4” | 1418x700x1500 | 395 | 260 | |
| DMZY-20A | two.3 | 81.2 | 1.eight | sixty three.6 | one.6 | fifty six.five | one.forty one | 49.8 | 15/20 | sixty five | G3/4” | 1882x790x1731 | 572 | five hundred | |
| DMZY-30A | 3.6 | 127.one | three.2 | 113 | / | / | two.41 | 85.1 | 22/30 | sixty eight | G3/4” | 1882x1081x1801 | 630 | 500 | |
Notes:one. A represents air-cooling variety,W represents drinking water-cooling sort
two. Doing work CZPT temperature: -5ºC~45ºC
three. Discharge temperature is significantly less than ambient temperature +10ºC~15ºC
four. CZPT Method: belt driven
5. CZPTtup Mode: immediate commence under 11kw, and above 11kw
six. Work Electricity: 380V / 50HZ, 460V / 230V / 6KV and 10KV voltages can be produced for clients
seven. F.A.D quantity circulation take a look at is in accordance to ASMC PTC9 or ISO1217 CZPT (GB/T3853)
Certification
Venture Case
Customer Comments
CZPT and delivery
About Us
CZPT CZPT was launched in 1996 with over a hundred and fifty competent workers and a lot more than 25 R&D engineersteams ‘ .We focus on the research & build,manufacture and strength-saving answers of screw CZPT to create value for buyers and society.In 2018 our total revenue volume approached fifteen million US pounds.By more than 23 many years increased activities of creating,
creating and advertising and marketing,nowadays our valued clients are in excess of 130 countries.
Germany Normal and thirteen a long time exporting experience assist us won a lot more than fifty faithful overseas agents.
CZPT’s primary companies concentrate in subsequent crucial areas:
Oil-injected rotary screw compressors
Moveable screw CZPTs
Oil free of charge CZPTs
Large strain CZPTs
Air treatment products
At CZPT,we receive our customers’ trust and satisfaction by producing the outstanding quality compressed air merchandise for all industries.All of our items are made for dependable efficiency,simple routine maintenance,and optimum power performance.We have product sales reps who can talk English,Spanish,French,and Russian which can make it easier for our clients from all above the world to interact and negotiate with us.
CZPT continually innovates solution advancement and administration to meet customers’ desire.The potent business culture and ongoing innovation make CZPT enhanced quickly to attain the company principle”CZPT Preserving Very first, Mutual Benefit CZPTd”. CZPT mission is to be a planet-renowned higher-end brand,with sustainable improvement,constantly enhancing its own benefit and sharing it with our buyers and staff.Dedicated to provide our buyers a silent and energy-saving created goods.
Our Support
1.24/seven right after sales provider support in diverse languages.
two.Comply with up the comments of goods in 2 months interval by email or get in touch with.
three.Direction of set up and commissioning on internet site can be offered by manufacturing unit-trained experts or nearby Licensed Support Centre.
four.CZPT coaching for customers in DEHAHA CZPT manufacturing unit or working website.
5.Plenty of CZPT spare areas with confirmed top quality are all available from our central stocks in ZheJiang and all distributors’depots.
6.All kinds of technological documents in distinct languages.
FAQ
Q1. Are you trading company or manufacture ?
A: We are skilled manufacture of screw CZPT of CZPTsu, China, a lot more than 24 a long time.
Q2. How long is the delivery time ?
A: For CZPT voltage ,15 doing work times. Non-CZPT ,you should get in touch with our revenue.
Q3. What is actually payment time period ?
A: T/T, L/C, D/P, CZPT CZPT, Paypal, Credit history Card, and and so on. Also we could accept USD, RMB, Euro and other currency.
This autumn. How about your right after-product sales service ?
A: 1.Supply customers with installation and commissioning on-line instructions.
2. Effectively-skilled engineers offered to abroad services.
3.Worldwide brokers and after services avaiable.organize our engineers to help you instruction and set up.
Q5. How about your warranty?
A: 1 calendar year for the entire device and two years for screw air finish, besides consumable spare elements.
Q6. Do you have any certification ?
A: Indeed, for each diverse customer’s industry require ,we can provide CE ,ISO and so forth certification.
Q7. What about the servicing ?
A: Initial maintenance require to be accomplished following 500Hours, and then each and every 2000-3000 hours to do the normal upkeep, and contemplate the real surroundings.
Q8. How do you management good quality ?
A: 1.The uncooked supplies are strictly inspected
2. Some essential areas are imported from abroad
3.Each compressor need to go at least five hrs of continuous testing before leaving the factory.
Q9. Do you provide OEM provider ?
A: Sure.Each OEM & ODM service can be acknowledged.
Q10.How long could your CZPT be utilized?
A: CZPTly, more than 10 many years.
