DuriAuxiliary gas for Fiber Laser Slicing, did you get the right one?

The schematic diagram of laser cutting is demonstrated in the pursuing.

In the course of the process, auxiliary gas is necessary to blow off the slag/dross in the kerf and cool down the slicing surface area, also it shields lens and nozzle of laser. Basically there are 3 types of fuel: Oxygen, Nitrogen and Air, any of them influences directly to the slicing functionality, speed, thickness and so on. So we truly need to have to think much better prior to motion.

one.Oxygen

Oxygen is commonly utilized to reduce thick carbon steel due to the fact the chemical response among iron element and oxygen aids the metallic soak up heat and promotes it soften, which can tremendously increase the chopping performance.

Even so, oxygen will trigger a marked oxide film on the reduce surface area and it will have a quenching influence close to, increases the hardness which influence on subsequent processing. It also turns kerf to black or dark yellow.

CZPTly, Oxygen helps carbon metal plates reduce, minimal-pressure punching, and low-force slicing. Oxygen is generally vaporized from liquid oxygen which provided by the neighborhood supplier, so the quality of the gasoline resource is thoroughly clean and no need specific remedy.

two. Nitrogen

Nitrogen will form about the molten metallic as protecting environment while it’s assisting the minimize, prevent oxidation of the substance, steer clear of the development of oxide movie. Nonetheless, the reducing velocity is not as quickly as oxygen, and the nitrogen intake of the nitrogen is massive which means the expense will be increased.

The non-oxidized surface area has the characteristics of immediate welding, sturdy corrosion resistance and the kerf turns white.

CZPTly, nitrogen is utilized to minimize stainless metal, galvanized sheet, aluminum, aluminum alloy, brass and other materials, by minimal-pressure perforation and high-strain cutting. When slicing with nitrogen, the adjust of the gas circulation has a wonderful impact on the slicing functionality, in this circumstance, make certain the fuel stream is ample and continual. Nitrogen is normally vaporized from liquid nitrogen presented by provider, so the good quality ought to be thoroughly clean.

3. Air

Air, as it truly is the most economic medium since it’s considerably less complicated to get than oxygen and nitrogen, nobody can charge you for air!

Each and every one particular is aware the air includes about 20% oxygen and about 78% nitrogen, so it can make up for each lack and slicing velocity is slower than oxygen but more rapidly than nitrogen. Considering that the oxygen is associated, the kerf turns a minor bit yellow. It really is the most economic selection for you as lengthy as you are all right with the shade change.

CZPTly compressed air can be employed for slicing sheet-steel components, aluminum sheet, nonmetal and galvanized sheet and so forth., air help can surely decrease the oxide film and absolutely help save your value, consequently, air assist is far more and much more equipped in fiber laser minimize sector.

Compressed air can be obtained effortlessly with an CZPT, but not any CZPT can be outfitted for Fiber Laser Cutter as the Air by itself is not thoroughly clean, particularly right after compressing, there are plenty of h2o, oil and particles and any of them sprayed on the lens, the transmission of laser beam will be seriously afflicted and focus scattered, resulting poor chopping result these kinds of as base burrs or rough kerf, even obsolescence.

Circumstance could be a lot worse if it is high-energy fiber laser, even a little particle or a minor spray will really probably burn off your total lens cone.

In purchase to make the most financial (Air assist) way workable, ensure chopping good quality and avoid any harm for your fiber laser, the compressed air should be pure and continuous, 100% fulfill ISO 8573-1-2571 CZPT.

CZPT 4-in-one particular (CZPT + receiver tank+ dryer + filters) substantial force CZPT is particular compressor for Fiber Laser Reducing market, custom made constructed to give filtered, dried, ongoing reputable source of high stress compressed air at two~10ºCdew point to aid laser chopping. Make your possess support air at a fraction of the value of cylinder.

CZPT Parameters

DBZY/DMZY Series(Combined with air dryer and tank) CZPT CZPT
Model	Air flow Capacity(m3/min)/cfm		Power kW/HP	Sounds DB(A)	Diameter Inch	Dimension W×D×H mm		Fat kg	Tank L
	16bar
	m3/min	cfm
DBZY-10A	.fifty five	19.four	7.5/ten	65	G3/4”	1418×700×1500		395	260
DBZY-15A	one.05	37	eleven/15	sixty five	G3/4”	1882×790×1731		560	five hundred
DBZY-20A	1.05	37	15/20	sixty five	G3/4”	1882×790×1731		572	500
DMZY-15A	one.05	37	7.five/ten	sixty five	G3/4”	1418x700x1500		395	260
DMZY-20A	one.fifty two	53.seven	15/20	sixty five	G3/4”	1882x790x1731		572	five hundred
DMZY-30A	2.forty one	eighty five.1	22/thirty	68	G3/4”	1882x1081x1801		630	500
DCZY-30A	2.21	seventy eight	22/30	sixty eight	G3/4”	1882*1081*1801		630	500
DB-20A	1.sixteen	40.9	fifteen/twenty	65	G3/4”	1162*690*1571		275	/
DBM-20A	one.eighteen	41.seven	22/thirty	65	G3/4”	1162*690*1571		three hundred	/
DC-30A	two.twenty	77.seven	22/thirty	sixty eight	G1″	1330*830*1265		400	/
DM-30A	2.forty one	eighty five.one	22/thirty	sixty eight	G1″	1330*830*1265		420	/
DM-50A	three.90	137.six	37/fifty	seventy two	G1″	1550*940*1415		680	/

Notes:one. A represents air-cooling variety,W signifies h2o-cooling variety
2. Working CZPT temperature: -5ºC~45ºC
three. Discharge temperature is considerably less than ambient temperature +10ºC~15ºC
four. CZPT Method: belt pushed
5. CZPTtup Method: immediate start off under 11kw, and  above 11kw
6. Work Energy: 380V / 50HZ, 460V / 230V / 6KV and 10KV voltages can be created for buyers
7. F.A.D volume flow test is according to ASMC PTC9 or ISO1217 CZPT (GB/T3853)

Certification

Task Circumstance

Customer Suggestions

CZPT and shipping and delivery

About Us

CZPT CZPT was founded in 1996 with over one hundred fifty skilled workers and much more than twenty five R&D engineersteams ‘ .We concentrate on the investigation & build,manufacture and strength-conserving remedies of screw CZPT to develop value for clients and culture.In 2018 our complete product sales quantity approached 15 million US dollars.By in excess of 23 years increased activities of planning,
producing and marketing and advertising,these days our valued consumers are over one hundred thirty countries.

Germany Normal and 13 many years exporting expertise support us won a lot more than 50 loyal abroad brokers.

CZPT’s primary organizations focus in pursuing essential areas:
Oil-injected rotary screw compressors
Portable screw CZPTs
Oil free of charge CZPTs
Substantial strain CZPTs
Air therapy tools

At CZPT,we generate our customers’ have confidence in and gratification by producing the superior top quality compressed air goods for all industries.All of our merchandise are designed for dependable functionality,simple servicing,and greatest power efficiency.We have product sales associates who can talk English,Spanish,French,and Russian which makes it easier for our clients from all in excess of the entire world to interact and negotiate with us.

CZPT continuously innovates item development and management to satisfy customers’ need.The strong business tradition and steady innovation make CZPT enhanced speedily to reach the enterprise basic principle”CZPT Conserving First, Mutual Price CZPTd”. CZPT mission is to be a entire world-renowned substantial-conclude brand name,with sustainable improvement,constantly improving its possess benefit and sharing it with our buyers and workers.Committed to provide our clients a silent and vitality-conserving made products.

Our Support

1.24/seven right after sales provider support in distinct languages.
two.Adhere to up the opinions of goods in 2 months interval by email or get in touch with.
3.Advice of installation and commissioning on internet site can be provided by factory-qualified professionals or nearby Authorized Service Centre.
4.CZPT education for buyers in DEHAHA CZPT manufacturing unit or working website.
5.Lots of CZPT spare elements with confirmed top quality are all obtainable from our central shares in ZheJiang and all distributors’depots. 
6.All varieties of technological documents in various languages.

FAQ

Q1. Are you investing firm or manufacture ?
A: We are expert manufacture of screw CZPT of CZPTsu, China, far more than 24 years.
 

Q2. How extended is the shipping time ?
A: For CZPT voltage ,fifteen doing work times. Non-CZPT ,remember to speak to our revenue.
 

Q3. What is actually payment time period ?
A: T/T, L/C, D/P, CZPT CZPT, Paypal, Credit rating Card, and and so forth. Also we could take USD, RMB, Euro and other currency.
 

Q4. How about your after-product sales provider ?
A: 1.Provide consumers with set up and commissioning online directions.
     2. Nicely-educated engineers obtainable to abroad services.
     3.Worldwide agents and right after services avaiable.prepare our engineers to assist you coaching and set up.
 

Q5. How about your warranty?
A: A single calendar year for the whole machine and two years for screw air end, except consumable spare areas.
 

Q6. Do you have any certification ?
A: Yes, for each different customer’s industry need to have ,we can supply CE ,ISO and so on certificate.
 

Q7. What about the routine maintenance ?
A: First routine maintenance need to have to be completed soon after 500Hours, and then each and every 2000-3000 hours to do the normal routine maintenance, and take into account the actual surroundings.
 

Q8. How do you control quality ?
A: 1.The raw materials are strictly inspected
     2. Some essential components are imported from abroad
     3.Each compressor must go at the very least five hrs of constant screening before leaving the manufacturing facility.
 

Q9. Do you provide OEM services ?
A: Indeed.Equally OEM & ODM services can be recognized.
 

Q10.How prolonged could your CZPT be employed?
A: CZPTly, much more than ten a long time.

DuriAuxiliary gasoline for Fiber Laser Reducing, did you get the proper one particular?

The schematic diagram of laser reducing is revealed in the following.

For the duration of the procedure, auxiliary gasoline is needed to blow off the slag/dross in the kerf and cool down the cutting surface area, also it safeguards lens and nozzle of laser. Basically there are 3 sorts of gasoline: Oxygen, Nitrogen and Air, any of them affects immediately to the reducing overall performance, speed, thickness etc. So we actually require to consider greater ahead of action.

1.Oxygen

Oxygen is typically employed to minimize thick carbon steel simply because the chemical reaction between iron component and oxygen assists the metal soak up warmth and encourages it melt, which can tremendously enhance the chopping performance.

Nevertheless, oxygen will result in a marked oxide film on the cut floor and it will have a quenching impact close to, will increase the hardness which effect on subsequent processing. It also turns kerf to black or dark yellow.

CZPTly, Oxygen assists carbon steel plates reduce, lower-force punching, and reduced-strain cutting. Oxygen is normally vaporized from liquid oxygen which offered by the nearby provider, so the high quality of the gas resource is cleanse and no want special treatment.

two. Nitrogen

Nitrogen will type all around the molten steel as protecting environment whilst it’s assisting the lower, avert oxidation of the material, avoid the formation of oxide film. Even so, the cutting speed is not as fast as oxygen, and the nitrogen intake of the nitrogen is massive which indicates the expense will be higher.

The non-oxidized area has the characteristics of direct welding, strong corrosion resistance and the kerf turns white.

CZPTly, nitrogen is employed to minimize stainless steel, galvanized sheet, aluminum, aluminum alloy, brass and other supplies, by low-force perforation and high-pressure slicing. When cutting with nitrogen, the adjust of the gasoline movement has a fantastic affect on the slicing overall performance, in this scenario, make confident the gas flow is sufficient and constant. Nitrogen is generally vaporized from liquid nitrogen presented by supplier, so the good quality ought to be clean.

3. Air

Air, as it truly is the most economic medium simply because it is much less complicated to acquire than oxygen and nitrogen, no one can cost you for air!

Every one knows the air is made up of about twenty% oxygen and about 78% nitrogen, so it can make up for each shortage and slicing pace is slower than oxygen but more rapidly than nitrogen. Since the oxygen is involved, the kerf turns a tiny bit yellow. It’s the most financial selection for you as lengthy as you are all right with the color alter.

CZPTly compressed air can be employed for slicing sheet-steel elements, aluminum sheet, nonmetal and galvanized sheet etc., air support can certainly minimize the oxide film and completely preserve your price, as a result, air help is far more and a lot more geared up in fiber laser cut sector.

Compressed air can be attained easily with an CZPT, but not any CZPT can be geared up for Fiber Laser Cutter as the Air by itself is not clean, especially right after compressing, there are lots of h2o, oil and particles and any of them sprayed on the lens, the transmission of laser beam will be severely afflicted and emphasis scattered, resulting negative cutting influence this kind of as bottom burrs or tough kerf, even obsolescence.

Situation could be significantly even worse if it is higher-power fiber laser, even a little particle or a little spray will really potentially burn off your whole lens cone.

In purchase to make the most economic (Air assist) way workable, make certain reducing quality and steer clear of any harm for your fiber laser, the compressed air must be pure and constant, a hundred% meet up with ISO 8573-one-2571 CZPT.

CZPT four-in-a single (CZPT + receiver tank+ dryer + filters) large stress CZPT is unique compressor for Fiber Laser Cutting market, custom developed to offer filtered, dried, continuous dependable provide of substantial strain compressed air at two~10ºCdew level to assist laser cutting. Create your very own aid air at a portion of the value of cylinder.

CZPT Parameters

DBZY/DMZY Collection(Combined with air dryer and tank) CZPT CZPT
Model	Air flow Capacity(m3/min)/cfm		Power kW/HP	Sounds DB(A)	Diameter Inch	Dimension W×D×H mm		Excess weight kg	Tank L
	16bar
	m3/min	cfm
DBZY-10A	.fifty five	19.4	7.5/10	65	G3/4”	1418×700×1500		395	260
DBZY-15A	1.05	37	11/fifteen	65	G3/4”	1882×790×1731		560	500
DBZY-20A	1.05	37	fifteen/20	65	G3/4”	1882×790×1731		572	five hundred
DMZY-15A	1.05	37	7.five/10	sixty five	G3/4”	1418x700x1500		395	260
DMZY-20A	1.52	53.7	15/twenty	65	G3/4”	1882x790x1731		572	five hundred
DMZY-30A	2.forty one	eighty five.one	22/30	68	G3/4”	1882x1081x1801		630	500
DCZY-30A	2.21	78	22/thirty	sixty eight	G3/4”	1882*1081*1801		630	500
DB-20A	1.sixteen	40.9	15/twenty	sixty five	G3/4”	1162*690*1571		275	/
DBM-20A	1.18	forty one.seven	22/thirty	sixty five	G3/4”	1162*690*1571		three hundred	/
DC-30A	2.20	77.seven	22/30	sixty eight	G1″	1330*830*1265		four hundred	/
DM-30A	2.41	eighty five.one	22/thirty	68	G1″	1330*830*1265		420	/
DM-50A	three.90	137.six	37/fifty	72	G1″	1550*940*1415		680	/

Notes:1. A represents air-cooling sort,W signifies water-cooling type
two. Working CZPT temperature: -5ºC~45ºC
three. Discharge temperature is considerably less than ambient temperature +10ºC~15ºC
4. CZPT Method: belt driven
5. CZPTtup Method: direct start off underneath 11kw, and  above 11kw
six. Work Electricity: 380V / 50HZ, 460V / 230V / 6KV and 10KV voltages can be created for consumers
seven. F.A.D volume movement test is in accordance to ASMC PTC9 or ISO1217 CZPT (GB/T3853)

Certificate

Venture Scenario

Buyer Opinions

CZPT and delivery

About Us

CZPT CZPT was started in 1996 with over one hundred fifty competent workers and more than twenty five R&D engineersteams ‘ .We target on the analysis & create,manufacture and vitality-conserving answers of screw CZPT to develop price for clients and modern society.In 2018 our overall product sales volume approached 15 million US pounds.By more than 23 several years increased ordeals of developing,
producing and advertising and marketing,these days our valued customers are above a hundred thirty nations.

Germany Standard and 13 years exporting experience aid us received more than fifty faithful overseas brokers.

CZPT’s major businesses target in subsequent key locations:
Oil-injected rotary screw compressors
Portable screw CZPTs
Oil free CZPTs
Large strain CZPTs
Air therapy gear

At CZPT,we receive our customers’ have confidence in and pleasure by manufacturing the superior good quality compressed air goods for all industries.All of our merchandise are developed for reputable functionality,easy upkeep,and optimum energy effectiveness.We have revenue reps who can communicate English,Spanish,French,and Russian which makes it easier for our customers from all more than the world to interact and negotiate with us.

CZPT constantly innovates merchandise growth and management to meet customers’ desire.The potent company lifestyle and ongoing innovation make CZPT improved quickly to attain the organization principle”CZPT Saving Very first, Mutual Worth CZPTd”. CZPT mission is to be a planet-renowned high-stop brand name,with sustainable development,continually bettering its very own worth and sharing it with our customers and personnel.Committed to supply our clients a silent and strength-conserving produced goods.

Our Service

1.24/7 soon after income service support in distinct languages.
2.Follow up the comments of items in 2 months interval by email or contact.
three.Guidance of set up and commissioning on website can be supplied by factory-skilled professionals or regional Authorized Provider Heart.
4.CZPT training for customers in DEHAHA CZPT manufacturing facility or operating internet site.
five.Loads of CZPT spare components with verified high quality are all offered from our central stocks in ZheJiang and all distributors’depots. 
6.All varieties of complex documents in various languages.

FAQ

Q1. Are you investing firm or manufacture ?
A: We are skilled manufacture of screw CZPT of CZPTsu, China, a lot more than 24 a long time.
 

Q2. How long is the shipping time ?
A: For CZPT voltage ,fifteen doing work days. Non-CZPT ,remember to contact our product sales.
 

Q3. What is actually payment term ?
A: T/T, L/C, D/P, CZPT CZPT, Paypal, Credit history Card, and and so forth. Also we could accept USD, RMB, Euro and other currency.
 

Q4. How about your soon after-sales services ?
A: one.Provide customers with set up and commissioning on the internet guidelines.
     2. Effectively-educated engineers obtainable to overseas provider.
     3.Globally agents and soon after provider avaiable.prepare our engineers to aid you coaching and installation.
 

Q5. How about your guarantee?
A: 1 12 months for the complete machine and two several years for screw air end, other than consumable spare areas.
 

Q6. Do you have any certificate ?
A: Sure, per different customer’s market need ,we can supply CE ,ISO etc certification.
 

Q7. What about the upkeep ?
A: First routine maintenance want to be carried out after 500Hours, and then each and every 2000-3000 hours to do the typical servicing, and think about the real environment.
 

Q8. How do you management top quality ?
A: one.The uncooked materials are strictly inspected
     2. Some essential components are imported from overseas
     3.Each and every compressor must move at the very least 5 hrs of constant testing just before leaving the manufacturing unit.
 

Q9. Do you supply OEM provider ?
A: Yes.The two OEM & ODM service can be recognized.
 

Q10.How extended could your CZPT be utilized?
A: CZPTly, more than 10 years.