Material Dealing with Electrical power UNIT two
General Description
This energy unit attributes electrical power up gravity down circuit. Activate the start solenoid to begin the motor to lift the machine. The lowing motion is activated by the solenoid valve with the decreasing pace managed through the strain compensated movement manage valve. Goods of this series could be widely used in the business of logistic units for instance fork lift, mini lift table, and so forth.
Specific Notes
1. The duty of this energy unit is S3,i.e.,30 seconds on and 270 senconds off.
two. Clean each of the hydraulic components concerned in advance of mounting the energy unit.
three. Viscosity of your hydraulic oil shoud be 15~46 cst,which should also be clean and free of charge of impurities, N46 hydraulic oil is encouraged .
four. Oil altering is needed following the initial a hundred operation hours,afterwards after each and every 3000 hrs.
5. The energy unit really should be mounted horizontally.

Materials Managing Electrical power UNIT 1
Standard Description
This power unit is designed for the fork lift business, consisting of hugely productive gear pump, DC motor, manual raise and lower valve, tank, ect. The up and down motion are managed by the lever of the guide release valve, which is equipped with an electric switch to activate the motor. The lowing speed is managed by the pressure compensated movement control valve.
Specific Notes
one. The duty of this electrical power unit is S3, i.e. 30 seconds on and 270 senconds off.
two. Clean every one of the hydraulic parts concerned in advance of installation of the electrical power unit.
3. Viscosity on the hydraulic oil shoud be 15~46 cst, which need to also be clean and totally free of impurities, N46 hydraulic oil is proposed .
four. Oil altering is needed just after the initial 100 operation hrs, afterwards once each and every 3000 hrs.
5. The power unit shown is designed to be mounted horizontally.