DuriAuxiliary gas for Fiber Laser Slicing, did you get the right one?

The schematic diagram of laser cutting is demonstrated in the pursuing.

In the course of the process, auxiliary gas is necessary to blow off the slag/dross in the kerf and cool down the slicing surface area, also it shields lens and nozzle of laser. Basically there are 3 types of fuel: Oxygen, Nitrogen and Air, any of them influences directly to the slicing functionality, speed, thickness and so on. So we truly need to have to think much better prior to motion.

one.Oxygen

Oxygen is commonly utilized to reduce thick carbon steel due to the fact the chemical response among iron element and oxygen aids the metallic soak up heat and promotes it soften, which can tremendously increase the chopping performance.

Even so, oxygen will trigger a marked oxide film on the reduce surface area and it will have a quenching influence close to, increases the hardness which influence on subsequent processing. It also turns kerf to black or dark yellow.

CZPTly, Oxygen helps carbon metal plates reduce, minimal-pressure punching, and low-force slicing. Oxygen is generally vaporized from liquid oxygen which provided by the neighborhood supplier, so the quality of the gasoline resource is thoroughly clean and no need specific remedy.

two. Nitrogen

Nitrogen will form about the molten metallic as protecting environment while it’s assisting the minimize, prevent oxidation of the substance, steer clear of the development of oxide movie. Nonetheless, the reducing velocity is not as quickly as oxygen, and the nitrogen intake of the nitrogen is massive which means the expense will be increased.

The non-oxidized surface area has the characteristics of immediate welding, sturdy corrosion resistance and the kerf turns white.

CZPTly, nitrogen is utilized to minimize stainless metal, galvanized sheet, aluminum, aluminum alloy, brass and other materials, by minimal-pressure perforation and high-strain cutting. When slicing with nitrogen, the adjust of the gas circulation has a wonderful impact on the slicing functionality, in this circumstance, make certain the fuel stream is ample and continual. Nitrogen is normally vaporized from liquid nitrogen presented by provider, so the good quality ought to be thoroughly clean.

3. Air

Air, as it truly is the most economic medium since it’s considerably less complicated to get than oxygen and nitrogen, nobody can charge you for air!

Each and every one particular is aware the air includes about 20% oxygen and about 78% nitrogen, so it can make up for each lack and slicing velocity is slower than oxygen but more rapidly than nitrogen. Considering that the oxygen is associated, the kerf turns a minor bit yellow. It really is the most economic selection for you as lengthy as you are all right with the shade change.

CZPTly compressed air can be employed for slicing sheet-steel components, aluminum sheet, nonmetal and galvanized sheet and so forth., air help can surely decrease the oxide film and absolutely help save your value, consequently, air assist is far more and much more equipped in fiber laser minimize sector.

Compressed air can be obtained effortlessly with an CZPT, but not any CZPT can be outfitted for Fiber Laser Cutter as the Air by itself is not thoroughly clean, particularly right after compressing, there are plenty of h2o, oil and particles and any of them sprayed on the lens, the transmission of laser beam will be seriously afflicted and focus scattered, resulting poor chopping result these kinds of as base burrs or rough kerf, even obsolescence.

Circumstance could be a lot worse if it is high-energy fiber laser, even a little particle or a minor spray will really probably burn off your total lens cone.

In purchase to make the most financial (Air assist) way workable, ensure chopping good quality and avoid any harm for your fiber laser, the compressed air should be pure and continuous, 100% fulfill ISO 8573-1-2571 CZPT.

CZPT 4-in-one particular (CZPT + receiver tank+ dryer + filters) substantial force CZPT is particular compressor for Fiber Laser Reducing market, custom made constructed to give filtered, dried, ongoing reputable source of high stress compressed air at two~10ºCdew point to aid laser chopping. Make your possess support air at a fraction of the value of cylinder.

CZPT Parameters

DBZY/DMZY Series(Combined with air dryer and tank) CZPT CZPT
Model	Air flow Capacity(m3/min)/cfm		Power kW/HP	Sounds DB(A)	Diameter Inch	Dimension W×D×H mm		Fat kg	Tank L
	16bar
	m3/min	cfm
DBZY-10A	.fifty five	19.four	7.5/ten	65	G3/4”	1418×700×1500		395	260
DBZY-15A	one.05	37	eleven/15	sixty five	G3/4”	1882×790×1731		560	five hundred
DBZY-20A	1.05	37	15/20	sixty five	G3/4”	1882×790×1731		572	500
DMZY-15A	one.05	37	7.five/ten	sixty five	G3/4”	1418x700x1500		395	260
DMZY-20A	one.fifty two	53.seven	15/20	sixty five	G3/4”	1882x790x1731		572	five hundred
DMZY-30A	2.forty one	eighty five.1	22/thirty	68	G3/4”	1882x1081x1801		630	500
DCZY-30A	2.21	seventy eight	22/30	sixty eight	G3/4”	1882*1081*1801		630	500
DB-20A	1.sixteen	40.9	fifteen/twenty	65	G3/4”	1162*690*1571		275	/
DBM-20A	one.eighteen	41.seven	22/thirty	65	G3/4”	1162*690*1571		three hundred	/
DC-30A	two.twenty	77.seven	22/thirty	sixty eight	G1″	1330*830*1265		400	/
DM-30A	2.forty one	eighty five.one	22/thirty	sixty eight	G1″	1330*830*1265		420	/
DM-50A	three.90	137.six	37/fifty	seventy two	G1″	1550*940*1415		680	/

Notes:one. A represents air-cooling variety,W signifies h2o-cooling variety
2. Working CZPT temperature: -5ºC~45ºC
three. Discharge temperature is considerably less than ambient temperature +10ºC~15ºC
four. CZPT Method: belt pushed
5. CZPTtup Method: immediate start off under 11kw, and  above 11kw
6. Work Energy: 380V / 50HZ, 460V / 230V / 6KV and 10KV voltages can be created for buyers
7. F.A.D volume flow test is according to ASMC PTC9 or ISO1217 CZPT (GB/T3853)

Certification

Task Circumstance

Customer Suggestions

CZPT and shipping and delivery

About Us

CZPT CZPT was founded in 1996 with over one hundred fifty skilled workers and much more than twenty five R&D engineersteams ‘ .We concentrate on the investigation & build,manufacture and strength-conserving remedies of screw CZPT to develop value for clients and culture.In 2018 our complete product sales quantity approached 15 million US dollars.By in excess of 23 years increased activities of planning,
producing and marketing and advertising,these days our valued consumers are over one hundred thirty countries.

Germany Normal and 13 many years exporting expertise support us won a lot more than 50 loyal abroad brokers.

CZPT’s primary organizations focus in pursuing essential areas:
Oil-injected rotary screw compressors
Portable screw CZPTs
Oil free of charge CZPTs
Substantial strain CZPTs
Air therapy tools

At CZPT,we generate our customers’ have confidence in and gratification by producing the superior top quality compressed air goods for all industries.All of our merchandise are designed for dependable functionality,simple servicing,and greatest power efficiency.We have product sales associates who can talk English,Spanish,French,and Russian which makes it easier for our clients from all in excess of the entire world to interact and negotiate with us.

CZPT continuously innovates item development and management to satisfy customers’ need.The strong business tradition and steady innovation make CZPT enhanced speedily to reach the enterprise basic principle”CZPT Conserving First, Mutual Price CZPTd”. CZPT mission is to be a entire world-renowned substantial-conclude brand name,with sustainable improvement,constantly improving its possess benefit and sharing it with our buyers and workers.Committed to provide our clients a silent and vitality-conserving made products.

Our Support

1.24/seven right after sales provider support in distinct languages.
two.Adhere to up the opinions of goods in 2 months interval by email or get in touch with.
3.Advice of installation and commissioning on internet site can be provided by factory-qualified professionals or nearby Authorized Service Centre.
4.CZPT education for buyers in DEHAHA CZPT manufacturing unit or working website.
5.Lots of CZPT spare elements with confirmed top quality are all obtainable from our central shares in ZheJiang and all distributors’depots. 
6.All varieties of technological documents in various languages.

FAQ

Q1. Are you investing firm or manufacture ?
A: We are expert manufacture of screw CZPT of CZPTsu, China, far more than 24 years.
 

Q2. How extended is the shipping time ?
A: For CZPT voltage ,fifteen doing work times. Non-CZPT ,remember to speak to our revenue.
 

Q3. What is actually payment time period ?
A: T/T, L/C, D/P, CZPT CZPT, Paypal, Credit rating Card, and and so forth. Also we could take USD, RMB, Euro and other currency.
 

Q4. How about your after-product sales provider ?
A: 1.Provide consumers with set up and commissioning online directions.
     2. Nicely-educated engineers obtainable to abroad services.
     3.Worldwide agents and right after services avaiable.prepare our engineers to assist you coaching and set up.
 

Q5. How about your warranty?
A: A single calendar year for the whole machine and two years for screw air end, except consumable spare areas.
 

Q6. Do you have any certification ?
A: Yes, for each different customer’s industry need to have ,we can supply CE ,ISO and so on certificate.
 

Q7. What about the routine maintenance ?
A: First routine maintenance need to have to be completed soon after 500Hours, and then each and every 2000-3000 hours to do the normal routine maintenance, and take into account the actual surroundings.
 

Q8. How do you control quality ?
A: 1.The raw materials are strictly inspected
     2. Some essential components are imported from abroad
     3.Each compressor must go at the very least five hrs of constant screening before leaving the manufacturing facility.
 

Q9. Do you provide OEM services ?
A: Indeed.Equally OEM & ODM services can be recognized.
 

Q10.How prolonged could your CZPT be employed?
A: CZPTly, much more than ten a long time.