CZPT introduction:
the airplane went on two face mask equipment is a mask physique device connected to a bypass device, by means of the bypass machine and ear belt connected equipment, when the equipment begins mask body machine to make the merchandise by the conveyor belt conveyor to bypass equipment, soon after in the transmission of masks to ear by the shunt machine belt welding device for ear component of welding in get to attain a complete face mask finished merchandise, the total procedure to recognize fully automated manufacturing process, does not require handbook procedure, namely a human body machine linked to two ear machine, output can reach a hundred-one hundred twenty items for every moment.

CZPT parameters:

product product:

driving mode: servo motor and stepping motor

PLC servo: ZheJiang delta

machine voltage: solitary-phase 220V

equipment size:  6500*3600*2000mm

man-device interface: ZheJiang delta

manage panel: male-machine interface (contact display screen) and button

equipment frequency: 50HZ

Substance employed: PP non-woven composite fiber

CZPT cylinder: ZheJiang yadek

CZPTsonic system: 15-twenty KHZ

Merchandise specification: CZPT design 175*95mm particular model a hundred and eighty*95mm a hundred forty five*90mm 125*90mm

CZPT capability: one hundred twenty tablets/min

Be aware: it can be related to two ear tape equipment for manufacturing

Item rewards:

1. Completely automated output. The mask human body is routinely acquired by an earband equipment, which reduces labor charges and minimizes the probability of interference.
two. The earband machine does not need to hold out for work, and the adaptive interactive processing system increases the productiveness.
three. Constructed-in anti-deformation and anti-touring system to make certain steadiness and dependability, a hundred% experienced enter in all climate.
4. Preset quantitative integrated output, neatly stacked, by no means scattered, sanitary and reputable.
5. From the creation of the mask human body to the earband, the nose bridge strip is melted, and the earband is location-welded. It is completely automatic and can be fashioned at 1 time without having any manual work.
six. The dimension of the nasal bridge strip and the physique can be configured in accordance to the drawings presented by the consumer.
7. Flat mask folding can be altered according to your possess requirements
eight. The device adopts laptop programmed handle and photoelectric detection to enhance the balance of the machine and decrease the failure fee of the device
nine. This machine adopts frequency conversion management to properly handle creation performance and generation velocity. Consumers can also modify the manufacturing speed in accordance to their real circumstances
10. In comparison with semi-automated tools, this established of products is more successful, person-friendly design, and simple to operate, which solves the issues of low productiveness, challenging recruitment and substantial wages of employees in mask production enterprises
11. From the production of the mask body to the welding of the nose bridge strips, spot welding of the earbands, the item packaging is fully automated and accomplished in a single time with no any manual function
12. The size of the nose bridge strip and the duration of the entire body can be configured according to consumer needs
thirteen.Feeding system: The machine adopts aluminum alloy structure, which is stunning and durable. The automated feeding technique has the tension setting and adjusts the rigidity of the material width, so as to effectively make certain the splendor and flatness of the concluded solution.
fourteen. The folding place of the mask can be freely modified according to needs, and the positioning is correct and does not shift

Welding basic principle: by means of CZPT to provide air electrical power into the cylinder for a linear reciprocating motion of gas and boosting the stress in compressor cylinder piston compression air provide from one aspect of the piston can generate force, air strain forces the pistons to generate thrust, by means of the titanium alloy welding head with two ultrasonic welding head surface rubbing against each other (large frequency vibration of tens of countless numbers of moments per CZPT) to sort a fusion amongst the molecular layer

Material: imported cylinder, imported servo motor, stepping motor, ultrasonic, man-equipment interface (touch monitor), aluminum alloy construction, photoelectric tests uncooked materials, large good quality steel and aluminum wonderful content, by way of CNC precision processing, beautiful look, no rust, much more tough.

Parts: the major component of the equipment adopted imported cylinder, imported servo motor, import stepper motor, the ultrasonic, photoelectric detection of uncooked materials, aluminum alloy structure, higher-quality steel aluminium concentrate following 1571 hrs, a few thousand multiprogramming, assembled, make sure clients in the use of gear in the process of high steadiness, low failure charge, every to the assembly software soon after recurring check assembled

CZPT composition: the main entire body of mask device (1 set), the relationship line of mask (one set) and the outer ear belt device of mask (two sets) represent the production line of total-automated disposable 3-layer mask equipment

Face mask machine: unwinding – ultrasonic compound – bridge of nose – prepress compound – folding – prepress compound – ultrasonic compound – roll slicing
 

Aircraft mask generation approach

1) stack the three levels of non-woven supplies jointly through the machine

2) roll the hem and place the nose in

3) a massive piece of non-woven cloth is progressively narrowed from still left to correct along the inclined airplane to make a “folding composition”.

4) urgent: push and flatten the floor of the mask

five) computerized single chopping and seaming of the mask

6) re-use non-woven fabric, and mend the edge of the mask

7) chopping and trimming yet again

8) by way of the way of hot pressing, fastened hanging ear rope

9) lastly go high quality inspection, sterilize and bundle the finished product

Get in touch with Us
Want to know far more about device value and technolgy knowledge, online video , picture. Can by way of Manufactured-in-China or Electronic mail or Whatsapp/. Inside of 2 hours send out to you on functioning days.
Welcome appear to go to our manufacturing unit and obtain our merchandise.
We constantly give equipments with best quality and perfect following-sale service.

Summer Xing
(Oversea marketing and advertising supervisor)
________________________________________
ZheJiang CZPT machinery Co.,Ltd.
Deal with: ZHangZhou industrial Park, Xihu (West Lake) Dis. District, HangZhou Metropolis, ZheJiang CZPT, China.
Website: http://
 

CZPT introduction:
the airplane went on two encounter mask device is a mask physique device related to a bypass equipment, via the bypass machine and ear belt linked equipment, when the machine starts mask physique equipment to produce the merchandise by the conveyor belt conveyor to bypass equipment, right after in the transmission of masks to ear by the shunt equipment belt welding equipment for ear element of welding in purchase to attain a entire confront mask completed merchandise, the whole procedure to comprehend entirely automatic generation process, does not need handbook procedure, specifically a physique device linked to two ear machine, output can get to a hundred-120 items for each minute.

CZPT parameters:

product model:

driving mode: servo motor and stepping motor

PLC servo: ZheJiang delta

machine voltage: solitary-phase 220V

equipment dimensions:  6500*3600*2000mm

gentleman-machine interface: ZheJiang delta

manage panel: gentleman-equipment interface (touch monitor) and button

equipment frequency: 50HZ

Materials utilised: PP non-woven composite fiber

CZPT cylinder: ZheJiang yadek

CZPTsonic method: fifteen-20 KHZ

Item specification: CZPT design 175*95mm specific design one hundred eighty*95mm one hundred forty five*90mm a hundred twenty five*90mm

CZPT capacity: 120 tablets/min

Observe: it can be related to two ear tape devices for manufacturing

Merchandise advantages:

one. Entirely automatic output. The mask entire body is immediately obtained by an earband machine, which minimizes labor costs and lowers the chance of interference.
2. The earband machine does not require to wait around for work, and the adaptive interactive processing technique increases the efficiency.
3. Developed-in anti-deformation and anti-touring gadget to ensure security and trustworthiness, one hundred% experienced enter in all climate.
4. Preset quantitative built-in output, neatly stacked, never ever scattered, sanitary and dependable.
five. From the production of the mask physique to the earband, the nose bridge strip is melted, and the earband is spot-welded. It is fully automated and can be fashioned at 1 time with out any guide perform.
six. The dimension of the nasal bridge strip and the human body can be configured in accordance to the drawings provided by the customer.
7. Flat mask folding can be adjusted in accordance to your very own requirements
8. The device adopts personal computer programmed handle and photoelectric detection to enhance the stability of the device and minimize the failure fee of the equipment
nine. This equipment adopts frequency conversion manage to precisely control manufacturing performance and generation pace. Customers can also modify the creation pace according to their real situations
10. Compared with semi-automated equipment, this established of equipment is much more productive, user-helpful design and style, and simple to run, which solves the difficulties of reduced productiveness, difficult recruitment and substantial wages of employees in mask generation enterprises
11. From the manufacturing of the mask body to the welding of the nose bridge strips, place welding of the earbands, the product packaging is completely automated and finished in one particular time without any manual perform
12. The dimensions of the nose bridge strip and the size of the entire body can be configured according to customer specifications
13.Feeding method: The equipment adopts aluminum alloy construction, which is lovely and sturdy. The automated feeding method has the tension location and adjusts the rigidity of the fabric width, so as to properly ensure the elegance and flatness of the completed product.
fourteen. The folding position of the mask can be freely altered in accordance to needs, and the positioning is exact and does not change

Welding principle: by signifies of CZPT to supply air electrical power into the cylinder for a linear reciprocating motion of fuel and elevating the stress in compressor cylinder piston compression air provide from one aspect of the piston can produce force, air pressure forces the pistons to generate thrust, by way of the titanium alloy welding head with two ultrasonic welding head surface area rubbing against every other (high frequency vibration of tens of 1000’s of instances for each CZPT) to form a fusion amongst the molecular layer

Content: imported cylinder, imported servo motor, stepping motor, ultrasonic, male-device interface (contact screen), aluminum alloy composition, photoelectric testing uncooked materials, high top quality metal and aluminum wonderful materials, by way of CNC precision processing, lovely look, no rust, far more tough.

Elements: the major part of the gear adopted imported cylinder, imported servo motor, import stepper motor, the ultrasonic, photoelectric detection of uncooked components, aluminum alloy structure, higher-high quality metal aluminium concentrate soon after 1571 several hours, three thousand multiprogramming, assembled, ensure consumers in the use of equipment in the procedure of substantial security, low failure fee, each and every to the assembly software following repeated check assembled

CZPT composition: the major physique of mask machine (1 established), the relationship line of mask (1 set) and the outer ear belt device of mask (two sets) represent the creation line of entire-computerized disposable a few-layer mask device

Confront mask equipment: unwinding – ultrasonic compound – bridge of nose – prepress compound – folding – prepress compound – ultrasonic compound – roll reducing
 

Aircraft mask creation approach

one) stack the a few layers of non-woven components together by means of the device

2) roll the hem and put the nose in

three) a massive piece of non-woven cloth is progressively narrowed from still left to correct together the inclined airplane to make a “folding construction”.

four) pressing: push and flatten the floor of the mask

five) automated solitary reducing and seaming of the mask

6) re-use non-woven fabric, and mend the edge of the mask

seven) reducing and trimming again

eight) via the way of scorching urgent, fastened hanging ear rope

9) last but not least move quality inspection, sterilize and bundle the finished merchandise

Make contact with Us
Want to know much more about machine cost and technolgy info, video clip , picture. Can via Made-in-China or E mail or Whatsapp/. Within 2 hours deliver to you on operating times.
Welcome occur to visit our factory and obtain our solution.
We often provide equipments with greatest top quality and excellent after-sale provider.

Summer season Xing
(Oversea marketing supervisor)
________________________________________
ZheJiang CZPT equipment Co.,Ltd.
Tackle: ZHangZhou industrial Park, Xihu (West Lake) Dis. District, HangZhou Metropolis, ZheJiang CZPT, China.
Web site: http://