100% purity no leakage Oil-free  Booster Diaphragm CZPT 

The diaphragm compressor booster is a special construction of the quantity-type compressor with higher compression ratio, excellent leak tightness, compressed gas without lubricating oil and other strong impurities contaminated features, So it is suited for higher purity compression, rare, worthwhile, inflammable, explosive, harmful, damaging, corrosive, and higher strain fuel.

CZPT made Helium compressor, Oxygen CZPT, Hydrogen CZPT, Nitrogen CZPT, Recovery H2 Gasoline compressor, Argon compressor, cylinder filling booster compressor, etc broadly utilised in CZPTs, Good CZPTs, CZPT CZPTs, CZPT CZPTs, CZPTry CZPT, CZPTtronics CZPT, Agriculture, Animal Husbandry and Protection CZPT, Astronomy, Aerospace, CZPT and other fields.
.
Benefits of Diaphragm compressor:
1.  Oil-free compression thanks to the airtight separation between gasoline and oil chamber.
2.  Abrasion-cost-free compression owing to static seals in the fuel stream
three.  CZPT shutdown in scenario of a diaphragm failure stops damage
four.  High Compression Ratios-Discharge stress up to 1000bar.
5.  Contamination Totally free Compression
6.  Corrosion Resistance
seven.  High Trustworthiness

As a displacement compressor with particular,diaphragm compressor is characterized by huge compression ratio,great sealing performace,and that the compress air will not be polluted by lubricant or other sound impurities.As a result diaphragm compressor is applicable to compress higher-purity,uncommon and treasured,flammable and explosive,toxic and harmful,corrosive and large strain gases.
CZPT diaghragm compressors consist of four types that are Z,V,L and D type.The exhaust pressure ranges from 1.3 to a hundred Mpa. The products are extensively employed in the industries of countrywide protection,scientific research,petrochemical,nuclear electricity,parmaceutical,food-stuff and fuel separation.

Inquiry to us!

Note:for the other customizing method gasoline compressor, you should kindly ship underneath details to our factory to determine the generating price for your merchandise.
 Clients’ inquiries need to incorporate connected parameters 
A. The fuel compression medium 
B. Fuel composition? or the gas purity?
C. The movement charge: _____Nm3/hr
D. Inlet pressure: _____ Bar (gauge stress or complete stress)
E. Discharge stress: _____ Bar (gauge strain or complete force)
F. Inlet temperature
G.Discharge temperature
H. CZPT drinking water temperature as nicely as other complex prerequisite.

CZPT Paramter of Oil Totally free Diaphragm CZPT

No.	Design	F.A.D (Nm3/min)	Inlet Pressure  ( Mpa)	Exhuast Pressure  (Mpa)	Power  (KW)	Velocity r/min	Dimension (L×W×H)mm	N.W  Excess weight (t)
1	GD6-one hundred forty/.5~six.five	a hundred and forty	.05	.65	45	363	4300*3300*2100	ten
2	GD6-one hundred fifty/.5~6	a hundred and fifty	.05	.six	45	363	4300*3300*2100	10
three	GD6-868/eleven~31	868	one.1	3.1	seventy five	365	4215*3250*2210	ten
4	GD6-240/six~one hundred fifty	240	.6	15	75	400	3500*2300*1600	eight.6
5	Gd6-one thousand/14~50	1000	1.four	5	75	400	3500*2300*1750	8.two
six	GD6H-570/1.5~six	570	.fifteen	.6	55	365	4300*3300*2100	thirteen
7	GD6H-212/.two~six	212	.02	.6	55	365	4300*3300*2100	13
8	GD6H-750/four~22	750	.four	two.two	90	420	4460*3340*2200	10.eight
9	GD6H-450/.eight~5	450	.08	.five	fifty five	420	4460*3400*2300	thirteen
ten	GD8-920/eight~30	920	.eight	three	one hundred ten	365	4340*3520*2390	eleven
eleven	GD8T-ninety/160	90	Typical	sixteen	fifty five	four hundred	4500*3800*2300	14
12	GD-120/70~800	one hundred twenty	seven	80	37	four hundred	3100*2000*1650	4.2
thirteen	GD-50/35	fifty	Typical	three.five	22	four hundred	2700*1500*1400	3.four
14	GL4-240/twenty~200	240	two	20	fifty five	400	3340*1900*2157	4
15	GL4-300/six~30	three hundred	.six	three	forty five	400	3340*1900*2200	four.five
sixteen	GD8-one thousand/14~50	a thousand	1.4	16	seventy five	four hundred	3500*2300*1750	eight.two
seventeen	GD8H-750/3~21	750	.3	two.1	one hundred	420	3900*3200*1900	thirteen.eight
eighteen	GD8-400/6~250	400	.six	twenty five	132	400	3900*2949*1560	12
19	GD25-290/two hundred	290		19.six	220	363	ten thousand*6000*3000	thirty
20	GD25-290/4~200	660	.four	19.6	250	363	ten thousand*6000*3000	30
21	GD25-290/10~two hundred	900	one	19.6	three hundred	363	10000*6000*3000	thirty
22	GD25-290/twenty~two hundred	1500	two	19.6	three hundred	363	10000*6000*3000	thirty

Major technological information

Cylinder 
All the cylinders comprise higher plate, diaphragms, and cylinder physique etc. The diaphragms are clamped between the cylinder go over and cylinder physique. The cylinder cover and cylinder body each has a concave recess hollowed out in their contacting faces. The gas cylinder is formed among cylinder go over concave recess and diaphragms. Both suction valve and discharge valve are fitted on the higher plate. Amongst of them, the discharge valve is situated on the center of the upper plate. The evenly situated modest oil holes are on the cylinder entire body to deliver the oil force inside of the oil cylinder to the base of diaphragms (every single diaphragm compressor’s cylinder has a few piece diaphragm.) 

Strain Regulating Valve 
The oil pressure of oil cylinder is controlled by the pressure of the valve spring.In situation the oil strain is larger than the controlled value, flip the regulating bolt counter-clockwise to loosen the spring tension, but switch the regulating bolt clockwise to tighten the spring, when the oil stress is decrease than the regulated worth. When the oil pressure satisfies the needed worth, the regulating bolt should be locked with a lock-nut. The oil force of the oil cylinder shall always be larger than the discharge force by fifteen~twenty%. But the oil and gasoline differential stress shall not be decrease than .3MPa or greater than 1.5MPa. 

Cooler
The cooler composition is the double-wall pipe variety. The circular place in between the outer and internal pipe is the cooling drinking water passage and the interior pipe is the gas passage. Normally the h2o inlet port is at the lower side and the h2o outlet port is at the higher side. The circulation route of cooling h2o and fuel is on the opposite.

Oil Strain Measuring Device 
The measuring unit of oil cylinder discharge stress is made up of shock-proof pressure gauge, check out valve and unloading valve. The situation of the stress gauge is entirely airproof and stuffed with damping liquid. The internal gadgets of gauge is immersed in the liquid, which makes the strain gauge arms secure through the perform of the viscosity of damping liquid. The unloading valve is equipped underneath the gauge to discharge the remained air in the oil pipeline   and to unload the oil stress gauge. Also the examine valve connecting with oil cylinder through pipeline is equipped below the unloading valve.   

Oil pipes 
Oil pipes consist of lube oil pipe and oil strain protected method.
The lubrication for the driving system adopts gear oil pump circulation pressure lubricating. The lube oil saved in the body oil tank enters into the gear oil pump right after becoming filtered and is pressed into the oil holes in the crankshaft by means of the gear oil pump to lubricate the crankshaft friction area. At the same time, element of the lube oil reaches the crosshead pin and crosshead along the oil holes in the connecting rod to lubricate the friction area. The oil strain of equipment oil pump shall be kept amongst .3~.5Mpa, and the bearings at the two ends of crankshaft is splash lubricated. 
Oil pressure safe technique is composed of oil compensating pipe, stress-measuring pipe and oil return pipe. The oil output from the oil compensating pump will health supplement oil for compressor cylinders by way of the oil compensating pipe and the excess oil returns to the crankcase through the pressure-regulating valve.

FAQ
Q1: What’s your supply time?
A: CZPTly five-10 days if the items are in stock. Or it is twenty-35 times if the merchandise are not in stock, it is according to amount.

Q2: How long is your CZPT warranty?
A: Normally 1 year /twelve Months for total compressor equipment, 2years/24months for air conclude (apart from servicing spare elements.). And we can give more guarantee if essential. 

Q3: How long could your CZPT be utilised?
A: CZPTly, a lot more than ten many years.

This fall: Can you do OEM for us?
A: Sure, of training course. We have around two decades OEM expertise.And also we can do ODM for you.

Q5: What’s payment term?
A: T/T, L/C, D/P, CZPT CZPT, Paypal, Credit rating Card, CZPT Assurance and etc. Also we could settle for USD, RMB, GBP, Euro and other currency.

Q6: How about your customer support?
A: 24 several hours on-line provider accessible. 48hours dilemma sovled promise.

Q7: How about your following-income services?
A: 1. Provide clients with intallation and commissioning on the internet directions.
2. Nicely-qualified engineers accessible to overseas soon after-income service. 

Q8. Are you manufacturing unit?
A4: Completely! You have touched the principal resources of Air /Gasoline CZPT. We are manufacturing facility.

How to make contact with with us?
Send out your Inquiry Specifics in the Underneath, or Simply click “Send out inquiry to provider” to check much more other Fuel CZPT machine tools!