oil-cost-free dry pump Milling grinding machines Air compressor
Attributes:
*Supplying thoroughly clean air without oil.Never fret about oil shortage or oil vapor pollution.Introduce the prevailing environmental friendly principle into the practical usage.
*Design with complete thought of decrease noice amount and reduce vibration.
*For user security:all heated elements are will guarded to avoid any achievable scalded chance.
*Higher productive and electricity preserving,Compact and useful carrying.
*CZPT management method and motor safety meshanism.with considerably easier upkeep.
*A variety of options for diverse application.
Optimally suited to continuous procedure of milling and grinding machines
Milling and grinding devices make specifically substantial requires on compressors to provide them with dependable and consistent compressed air. Milling equipment do not pause for breath for the duration of operation, so oil-free of charge and dry compressed air is top priority. The duty cycle of compressor units running a milling equipment goes much outside of their responsibility cycle for regular dental operations. Pransch engineering meets all such calls for and is designed for ongoing operation. Higher-high quality program areas make sure large precision and tranquil operating. CZPTs not only run quieter, but also very last longer.
The consistent, uninterrupted flow of compressed air necessary by milling and grinding equipment helps make for really lengthy compressor responsibility cycles and allows for only quick shut-off cycles.
| Design | Operating Force (bar) |
Capability (m3/min) |
motor power (Kw) |
Dimension(mm) | Fat | ||
| Size | Width | Peak | |||||
| PA10 | eight | .08 | .seventy five | 800 | 340 | 790 | sixty five |
| PA15 | 8 | .12 | one.1 | 800 | 340 | 790 | 75 |
| PA20 | 8 | .18 | 1.five | 1070 | four hundred | 820 | one hundred thirty |
| PA25 | eight | .25 | two.two | 1070 | four hundred | 820 | a hundred and fifty |
| PA30 | eight | .4 | 3 | 1400 | 510 | 1120 | 230 |
| PA40 | 8 | .fifty five | 4 | 1400 | 510 | 1120 | 280 |
| PA50 | eight | .7 | 5.five | 1500 | 550 | 1580 | 305 |
| PA55 | eight | 1 | seven.five | 1500 | 550 | 1580 | 340 |
| PA60 | eight | one | 16 | 1730 | 580 | 1230 | 355 |
| PA70 | eight | 2 | eleven | 1690 | 630 | 1300 | 465 |
| PA100 | eight | two.65 | 15 | 1700 | 660 | 1340 | 580 |
| PA150 | eight | two.84 | 15 | 1750 | 690 | 1400 | 650 |
| PA200 | 12.5 | .21 | 2.two | 1400 | 510 | 1000 | 260 |
| PA140 | 12.five | .three | three | 1400 | 510 | one thousand | 290 |
| PA240 | 12.five | .forty five | 4 | 1400 | 510 | one thousand | three hundred |
| PA250 | twelve.five | .six | 5.five | 1650 | 600 | 1200 | 280 |
| PA260 | twelve.five | .8 | 7.5 | 1500 | 550 | 1180 | 350 |
| PA300 | twelve.five | one.two | eleven | 1690 | 630 | 1300 | 480 |
| PA350 | 10 | 1.6 | 11 | 1690 | 630 | 1300 | 480 |
| PA400 | twelve.five | 1.seven | fifteen | 1700 | 660 | 1340 | 600 |
| PA450 | 12.5 | two.one | 15 | 1750 | 690 | 1400 | 650 |
Application Use:
Air Brushing,Blow Cleansing,Bolting/Wrenching,Brad Nailing/Stapling,Reducing,Drilling,Complete Nailing,Framing Nailing,Interest Nailing,Interest Portray,Inflation,Roof Nailing,Sanding,CZPT,Surface Prep
Capacity For:one/four”-3/eight” Air Ratchet, three/eight”-one/two”Air Effect Wench, Jitterbug Sander, Siphon Feed Sand Blaster, Air Nibbeler, Air Stapler,Ending Nailer, CZPT Nailer, Air Brush, Air Grease Gun, Air Caulking Gun, Touch Up Spray Gun, Multi-Goal Spray Gun, Tire CZPT