Fan Electric motor, 1/8 hp 120V 2.2 Amp 3-Speed
General Explanation: New fan motor, removed from unused 18” or 24” China Atmosphere Compressor diameter TPI fans. Made to operate an 18” or 24” enthusiast blade (blade NOT included).
This motor comes with a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All the wiring between your electric motor, capacitor and quickness control change is still hooked up nevertheless the cord itself is normally detached as observed in the photos. (Find “Control Notice” below for modify type.)
T (See “App Notice” below for utilize in various other applications.)
Measurements: The engine body is 5” diameter and 3 ½” long (not including the shaft). The engine shaft is certainly½” (0.500″) diameter x 2 ½” long with a collection screw smooth. There are (4) threaded mounting lugs on the front of the motor, ½” long x .16 dia. with washers and nuts. The studs may actually ‘ve got 4mm threads and to be on a 117mm (4.6”)diameter circle (3 ¼” measured from one stud to another).
Rate: The approximate engine speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Direction of rotation (facing the shaft end of the electric motor) is Clockwise.

Control Take notice: Motors may come with EITHER a 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we have demonstrated BOTH versions in the images). Both of these types of switches both control the engine in the same way (but you have a rotating knob and you have a pull-chain). If you order several engine at the same time, we can do our best to Electric Fan Motor supply your purchase with each one sort of control or the excess.
Application Note: Do NOT use this electric motor in a nonfan app. This is a totally enclosed fan electric electric motor and designed to have constant ventilation over the electric motor casing for cooling. The casing isn’t vented and the electrical electric motor will overheat and get into automatic thermal overload if run in a nonfan plan where there isn’t strong ventilation past the engine. (Caution Note: the electrical motor will restart instantly when it cools back off.) Using this electrical motor for applications apart from 18 & 24″ TPI fans could also overload the motor and lead it to proceed into automated thermal overload. (Your lover blade from another producer may possess a steeper blade position.)
Origin: This electric engine is manufactured in China.