Diaphragm CZPT a hundred% purity no leakage Oil-cost-free Oxygen Booster CZPT
The diaphragm compressor booster is a special framework of the volume-type compressor with substantial compression ratio, very good leak tightness, compressed gas with no lubricating oil and other strong impurities contaminated functions, So it really is ideal for substantial purity compression, rare, valuable, inflammable, explosive, toxic, harmful, corrosive, and higher force gas
Positive aspects of Diaphragm compressor:
1. Oil-totally free compression due to the airtight separation among gas and oil chamber.
2. Abrasion-free of charge compression because of to static seals in the gas stream
three. CZPT shutdown in scenario of a diaphragm failure helps prevent harm
four. High Compression Ratios-Discharge stress up to 1000bar.
five. Contamination Cost-free Compression
six. Corrosion Resistance
7. High Reliability
As a displacement compressor with unique,diaphragm compressor is characterized by large compression ratio,very good sealing performace,and that the compress air will not be polluted by lubricant or other strong impurities.For that reason diaphragm compressor is relevant to compress large-purity,unusual and cherished,flammable and explosive,toxic and hazardous,corrosive and high pressure gases.
CZPT diaphragm compressors consist of 4 sorts that are Z, V, L and D type.The exhaust stress ranges from 1.3 to one hundred Mpa. The goods are commonly employed in the industries of nationwide defense,scientific study, petrochemical, nuclear electricity, parmaceutical, food-stuff and gasoline separation.
Inquiry to us!
Observe:for the other customizing process gasoline compressor, remember to kindly send out under data to our manufacturing unit to compute the producing expense for your merchandise.
Clients’ inquiries ought to contain relevant parameters
A. The gasoline compression medium
B. Gas composition? or the fuel purity?
C. The circulation rate: _____Nm3/hr
D. Inlet stress: _____ Bar (gauge stress or complete force)
E. Discharge force: _____ Bar (gauge stress or absolute pressure)
F. Inlet temperature
G.Discharge temperature
H. CZPT water temperature as nicely as other complex necessity.
CZPT Paramter of Oil Cost-free Diaphragm CZPT
| GZ type Diaphragm CZPT CZPT Parameters | |||||||||
| No. | Product | F.A.D (Nm3/min) | Inlet Pressure ( Mpa) |
Exhuast Pressure (Mpa) |
Power (KW) |
Pace r/min |
Dimension (L×W×H)mm |
N.W Bodyweight (t) |
Voltage V |
| 1 | G2V-10/8-one hundred sixty | 10 | .eight | sixteen | five.five | four hundred | 1550*900*1050 | .eight | 380 |
| 2 | G2V-5/3.5~150 | 5 | .35 | fifteen | five.5 | four hundred | 1550*900*1050 | .eight | 380 |
| 3 | G2V-10/4~320 | 10 | .four | 32 | 5.five | 430 | 1650*850*1250 | .eight | 380 |
| four | G3V-240/five~twelve | 240 | .five | one.2 | 18.five | 400 | 1860*1200*1585 | 2 | 380 |
| five | G3V-1200/seventy five~83 | 1200 | 7.5 | 8.three | eighteen.5 | four hundred | 1780*1050*1750 | 1.eight | 380 |
| six | G3V-80/thirteen~150 | eighty | 1~1.five | fifteen | 22 | 330 | 2400*1350*1465 | two.one | 380 |
| 7 | G3V-30/5~315 | thirty | .5 | 31.five | fifteen | 400 | 2571*955*1455 | 1.eight | 380 |
| eight | G3V-eighty/7~one hundred fifty | 80 | .seven | fifteen | 22 | 400 | 2302*1385*1444 | 2.five | 380 |
| 9 | G2V-twenty five/6~one hundred fifty | 25 | .6 | 15 | 7.five | four hundred | 1500*775*1075 | .eight | 380 |
| ten | G2.5V-10/one hundred sixty | ten | Standard | 16 | 7.five | 400 | 1650*1571*1400 | .95 | 380 |
| 11 | G2.5V-twenty/1~160 | 20 | .one | 16 | eleven | 400 | 1650*1571*1400 | .ninety five | 380 |
| twelve | G2.5V-16/2.5~one hundred sixty | sixteen | .25 | 16 | 7.five | 400 | 1650*1571*1400 | .95 | 380 |
| thirteen | G3V-a hundred/24~a hundred twenty five | a hundred | two.four | 12.five | 22 | 400 | 2160*1250*1500 | 1.8 | 380 |
| 14 | G4V-220/ninety nine-349 | 220 | seven.~twenty five | 34.9 | 37 | four hundred | 2492*1840*1610 | 3.two | 380 |
| fifteen | G2Z-45/150~350 | 45 | ten~20 | 35 | seven.5 | four hundred | 1610*790*1380 | .55 | 380 |
| sixteen | G2Z-five/thirty~400 | 5 | 3 | 40 | five.five | 400 | 1560*790*1470 | .fifty five | 380 |
| seventeen | G2.5Z-thirty/32~a hundred and seventy | 30 | 3.2 | 17 | seven.five | four hundred | 1550*650*1530 | .7 | 380 |
| eighteen | G3Z-600/75~eighty three | 600 | seven.five | 8.3 | eleven | four hundred | 1780*1050*1750 | 1.3 | 380 |
| 19 | G3Z-eighty five/100~350 | 85 | 5~25 | 35 | 18.5 | 400 | 1900*1240*1760 | 1.6 | 380 |
| 20 | G3Z-a hundred and fifty/one hundred fifty~350 | a hundred and fifty | 15 | 35 | eighteen.5 | 400 | 1780*1050*1750 | 1.eight | 380 |
| 21 | G2.5Z-forty/7~thirty | 40 | .seven | 3 | seven.5 | 400 | 1653*1372*1470 | .nine | 380 |
| 22 | G2.5Z-one hundred/twenty~35 | one hundred | 2 | three.5 | five.5 | four hundred | 1330*750*1530 | .nine | 380 |
| 23 | GV3-a hundred and ten/8~one hundred fifty | 110 | .8 | 15 | thirty | 400 | 2370*1458*1630 | 3 | 380 |
| 24 | G3V-one hundred fifty/three.5~thirty | 150 | .35~.55 | three | 30 | 400 | 2543*1835*2036 | 3.21 | 380 |
| twenty five | G3V-60/.38~nine.3 | sixty | .038 | .93 | fifteen | 400 | 2030*1520*1750 | seventy two | 380 |
Primary complex information
Cylinder
All the cylinders comprise upper plate, diaphragms, and cylinder physique and so forth. The diaphragms are clamped between the cylinder protect and cylinder human body. The cylinder go over and cylinder physique each has a concave recess hollowed out in their making contact with faces. The fuel cylinder is fashioned between cylinder cover concave recess and diaphragms. Each suction valve and discharge valve are equipped on the upper plate. Amongst of them, the discharge valve is found on the center of the higher plate. The evenly found little oil holes are on the cylinder entire body to supply the oil pressure inside of the oil cylinder to the base of diaphragms (each diaphragm compressor’s cylinder has 3 piece diaphragm.)
Force Regulating Valve
The oil stress of oil cylinder is controlled by the rigidity of the valve spring.In situation the oil stress is higher than the regulated value, change the regulating bolt counter-clockwise to loosen the spring pressure, but switch the regulating bolt clockwise to tighten the spring, when the oil force is reduced than the controlled value. When the oil stress meets the necessary value, the regulating bolt should be locked with a lock-nut. The oil stress of the oil cylinder shall often be greater than the discharge pressure by fifteen~twenty%. But the oil and gas differential strain shall not be reduced than .3MPa or greater than 1.5MPa.
Cooler
The cooler construction is the double-wall pipe kind. The circular space between the outer and internal pipe is the cooling drinking water passage and the internal pipe is the gasoline passage. Normally the water inlet port is at the reduced aspect and the water outlet port is at the upper facet. The movement course of cooling drinking water and gasoline is on the contrary.
Oil Stress Measuring Device
The measuring gadget of oil cylinder discharge pressure consists of shock-proof pressure gauge, check out valve and unloading valve. The scenario of the force gauge is completely airproof and loaded with damping liquid. The interior units of gauge is immersed in the liquid, which helps make the pressure gauge arms stable via the perform of the viscosity of damping liquid. The unloading valve is equipped beneath the gauge to discharge the remained air in the oil pipeline and to unload the oil pressure gauge. Also the examine valve connecting with oil cylinder via pipeline is fitted under the unloading valve.
Oil pipes
Oil pipes consist of lube oil pipe and oil force safe system.
The lubrication for the driving system adopts gear oil pump circulation force lubricating. The lube oil stored in the frame oil tank enters into the gear oil pump after becoming filtered and is pressed into the oil holes in the crankshaft through the equipment oil pump to lubricate the crankshaft friction floor. At the same time, part of the lube oil reaches the crosshead pin and crosshead along the oil holes in the connecting rod to lubricate the friction surface. The oil force of equipment oil pump shall be retained among .3~.5Mpa, and the bearings at the two ends of crankshaft is splash lubricated.
Oil stress protected program consists of oil compensating pipe, pressure-measuring pipe and oil return pipe. The oil output from the oil compensating pump will dietary supplement oil for compressor cylinders by way of the oil compensating pipe and the extra oil returns to the crankcase by means of the strain-regulating valve.
FAQ
Q1: What’s your delivery time?
A: CZPTly 5-10 times if the goods are in inventory. Or it is 20-35 times if the goods are not in stock, it is in accordance to amount.
Q2: How prolonged is your CZPT warranty?
A: Normally 1 year /12 Months for entire compressor device, 2years/24months for air finish (other than servicing spare elements.). And we can supply additional guarantee if required.
Q3: How long could your CZPT be employed?
A: CZPTly, much more than ten many years.
Q4: Can you do OEM for us?
A: Of course, of course. We have about two many years OEM encounter.And also we can do ODM for you.
Q5: What is payment phrase?
A: T/T, L/C, D/P, CZPT CZPT, Paypal, Credit history Card, CZPT Assurance and and so forth. Also we could settle for USD, RMB, GBP, Euro and other forex.
Q6: How about your customer service?
A: 24 hrs on-line services available. 48hours dilemma sovled guarantee.
Q7: How about your following-product sales services?
A: one. Provide consumers with intallation and commissioning on the web instructions.
2. Effectively-educated engineers accessible to abroad following-income support.
Q8. Are you manufacturing unit?
A4: Definitely! You have touched the principal resources of Air /Gas CZPT. We are manufacturing unit.
How to make contact with with us?
Ship your Inquiry Specifics in the Below, or Click on “Send out inquiry to provider” to examine more other Fuel CZPT equipment equipment!