Item Particulars
| Solution Identify: CZPT Mini Stationary Air CZPT |
| Product quantity: ZW-7.five |
| Highest Pressure:10BAR/145PSI |
| Operating Force: 7 – 10bar (one hundred – 145psi) |
| Air Shipping/capacity: one – one.2m3/min |
| Motor Electricity: seven.5kw/10hp |
| Lubricating Drinking water Quantity: twenty L |
| Rotation Rate : 2940 rpm |
| Sounds Degree: 70 dBA |
| Kind of Driving: Directly CZPTn |
| Type of CZPT: Air CZPT/Water CZPT |
| Dimension: 1135×800×1000 mm |
| Weight: 480kg |
| Air Outlet Discharge Dimensions: G1″ |
Parameters
| MCZPTL | Maximum Operating Pressure | Cost-free AIR Shipping and delivery* OF Unit AT Working Strain | MOTOR | Noise Level | Lubricating H2o | Rotation Price | AIR OUTLET DISCHARGE Measurement | Bodyweight | Proportions | ||||
| Sum | |||||||||||||
| Bar | PSI | l/s | CFM | m3/min | kW | HP | dBA | L | rpm | (mm) | KG | (mm) | |
| ZW-7.five | seven | 102 | 20 | 43 | one.two | 7.5 | ten | sixty one | 20 | 2940 | G1 | 480 | 1135×800×1000 |
| 8 | 116 | 18 | 39 | 1.1 | |||||||||
| 10 | a hundred forty five | seventeen | 36 | one | |||||||||
| ZW-11 | 7 | 102 | 27 | 57 | 1.6 | 11 | fifteen | 61 | twenty | 2940 | G1 | five hundred | 1135X800×1000 |
| eight | 116 | twenty five | fifty four | 1.5 | |||||||||
| 10 | one hundred forty five | 22 | forty six | one.3 | |||||||||
| ZW-fifteen | 7 | 102 | 40 | 86 | two.4 | fifteen | twenty | 61 | 27 | 2940 | G1 | 520 | 1400×1000×1200 |
| 8 | 116 | 38 | 82 | 2.three | |||||||||
| 10 | a hundred forty five | 33 | seventy eight | 2 | |||||||||
| ZW-eighteen.5 | 7 | 102 | 52 | 111 | three.1 | 18.five | twenty five | 61 | 27 | 2940 | G1 | 520 | 1400×1000×1200 |
| eight | 116 | 47 | 100 | 2.eight | |||||||||
| 10 | one hundred forty five | forty two | 89 | two.five | |||||||||
| ZW-22 | 7 | 102 | 62 | 132 | three.seven | 22 | 30 | 61 | 27 | 2940 | G1 | 560 | 1400×1000×1200 |
| 8 | 116 | 57 | 121 | three.four | |||||||||
| 10 | a hundred forty five | fifty | 107 | three | |||||||||
| ZW-30 | 7 | 102 | 87 | 186 | five.2 | 30 | 40 | sixty four | 40 | 2940 | G11/2 | 1050 | 1920×1170×1320 |
| 8 | 116 | seventy eight | 168 | 4.seven | |||||||||
| 10 | 145 | seventy two | 154 | 4.3 | |||||||||
| ZW-37 | seven | 102 | 102 | 218 | six.one | 37 | fifty | 66 | 40 | 2940 | G11/2 | 1050 | 1920×1170×1320 |
| 8 | 116 | ninety three | two hundred | 5.6 | |||||||||
| ten | a hundred forty five | 83 | 179 | five | |||||||||
| ZW-forty five | seven | 102 | one hundred twenty five | 268 | 7.five | 45 | 60 | 66 | forty | 2960 | G2 | 1610 | 1920×1170×1320 |
| 8 | 116 | 113 | 243 | 6.8 | |||||||||
| ten | 145 | 100 | 214 | six | |||||||||
| ZW-55 | 7 | 102 | 167 | 357 | 10 | 55 | seventy five | sixty six | 100 | 2960 | G2 | 1610 | 1930×1320×1535 |
| 8 | 116 | a hundred and fifty | 321 | nine | |||||||||
| ten | 145 | 130 | 214 | 7.eight | |||||||||
| ZW-75 | seven | 102 | 271 | 357 | thirteen | seventy five | a hundred | 70 | a hundred | 2960 | G2 | 1880 | 1930×1320×1535 |
| 8 | 116 | 200 | 321 | 12 | |||||||||
| ten | a hundred forty five | 167 | 279 | ten | |||||||||
| ZW-ninety | seven | 102 | 258 | 464 | 15.five | ninety | 125 | 70 | one hundred eighty | 2970 | DN80 | 2700 | 2150×1600×1000 |
| eight | 116 | 233 | 429 | fourteen | |||||||||
| ten | 145 | 208 | 357 | twelve.5 | |||||||||
| ZW-110 | seven | 102 | 333 | 554 | twenty | one hundred ten | one hundred fifty | 72 | 200 | 2970 | DN80 | 3100 | 2150×1600×1000 |
| eight | 116 | 300 | 500 | 18 | |||||||||
| ten | one hundred forty five | 267 | 466 | 16 | |||||||||
| ZW-132 | seven | 102 | 417 | 893 | 25 | 132 | one hundred eighty | seventy two | 240 | 2970 | DN80 | 3250 | 2150×1600×1000 |
| 8 | 116 | 383 | 821 | 23 | |||||||||
| ten | one hundred forty five | 333 | 814 | 20 | |||||||||
Benefits
| √ Straightforward |
| A single screw rotor and two gate rotors which are positioned at proper angle to the axis represent two compressing rooms. Consequently, the screw rotor with 6 grooves compresses as many as 12 instances for each rotation. |
| √ Quietness |
| Without having applying thrust load to the axis path of the rotor, the pressure in the circumference route rotates quietly with great balance. As a consequence, the load to the bearing is lightened, minimizing the technology of noise or vibration. |
| √ Durability |
| The gate rotors are rotated pursuing the rotation of the screw rotor along its equipment. The h2o movie shaped on the screw rotor’s gear and the free of charge floating system maintains the large performance for a extended time (in case of drinking water lubrication). |
| √ Large Efficiency |
| Given that the lubrication water is jetted in the compressing method, the compression is done effortlessly underneath practically even temperature, acknowledging perfect, secure and highly efficient compression with slow rotation (in circumstance of h2o lubrication). |
| Comparison | H2o Lubricated oil-cost-free single screw CZPT | Dry oil-free of charge double screw CZPT |
| Air Discharge Temp | About 50ºC | About a hundred and eighty-200ºC |
| Clearance Quantity | Rotor has been employed 2 times through one circulation No clearance volume still left |
Rotor has been utilised after by way of one particular circulation Present clearance volume |
| Air Supply | Excellent isothemal compression,air shipping volume5%-12% far more | CZPT dropped owing to scorching air discharge |
| Efficiency | Usually:fifty nine-6.4 kw/(m3/min) | Typically:6.-six.six kw(m3/min) |
| Air CZPT | a hundred% oil-cost-free | Oil in the gear,large risk of air good quality |
| Air Purity | Purified by water,thoroughly clean air right after separation | Immediately compressed then discharge,made up of dust and oil stain |
| Structure Balance | Radial and axial loads terminate each other | Radial load is not been balanced |
| Sounds and Vibration | Basic structure,Low vibration and significantly less sounds,Normally:60-65 dB(A) | Substantial frequency sounds thanks to screw grinding,Usually:sixty four-seventy eight dB(A) |
| Longevity | Rotation pace 3000r/min,theoretically zeao load,extended life time of screw(30000h),star wheel(50000h) | Rotation pace 18000r/min,higher loads on crews,brief life time of screw(8000-18000h) |
| Set up | Only a couple of spare parts,canbe put in and adjusted individually | Sophisticated development,demands special specialized help for installation |
| Routine maintenance | Only replaced air filter and water filter,effortless upkeep and lower cost | A lot of spare areas and much less routine maintenance cycle,high value |
Application
CZPT Solutions
| ? Does the water corrode the CZPT technique? |
| Water lubricated compressor is appealing to use pure ingesting drinking water CZPTs,elements and materials is conform to the international CZPT grades of 304 and 316 stainless metal,will by no means rust. |
| ? Does the water impact the service lifestyle of bearings? |
| Uses a large-tech nanotechnology,CZPT silicon carbide bearing and ceramic bearing,lubrication with water straight,is not going to any issues |
| ? Will the effectiveness of h2o lubrication oil free of charge compressor go down? |
| CZPT is the only genuinely grasp the essence of a solitary screw manufacturing business in the planet,inherited the Germany hundred processes and systems,so the air stop warranty for two several years,the service existence of up to 10 years or much more,a one screw air conclude effectiveness does not reduce a lot more than five% right after 6 years. |
| ? Does the water kind scale? |
| Technique makes use of pure water which is accord with driking drinking water CZPTs,drinking water has been circulating in the systemand every single 200hours total,the method will routinely modify the drinking water,make confident the drinking water dows not improve the calcium material,and actively managing a tempreature not higher than 50ºC,there is no risk of fouling. |
| ? Is the water content material in h2o lubrication compressor air large? |
| Right after air compression,the water content has reached saturation,the h2o material of the compressed air only related to the tempreature,there is no partnership with other,the temperature of the compressed air produced by h2o lubrication unit is not higher than 50ºC,so the h2o lubricated compressed air moisture than other sorts of compressors units. |
Sales Services
Professional online advisor to remedy your concern about compressor system.
√ Totally free website layout expert, and power preserving resolution to assist you conserve procedure value.
√ Negotiable technician obtainable to provider machinery abroad.
√ On-line skilled soon after-support till remedy the issue.
√ one year warranty following commissioning or sixteen months towards transport date, it depends on which 1 occur to begin with for the total
machine(other than maintenance consumable).
√ A sufficient amount of spare elements are offered, make confident the good right after service.
Certification
About CZPT
|
CZPT CZPT
|
RFQ
Q1. Are you investing company or manufacture ?
A: We are specialist manufacture of screw CZPT much more than 8 years.
Q2. How prolonged is the shipping time ?
A: For CZPT voltage ,fifteen operating days. Non-CZPT ,make sure you contact our product sales.
Q3. What is actually payment time period ?
A: T/T, L/C, D/P, CZPT CZPT, Paypal, Credit rating Card, and and so forth. Also we could take USD, RMB, Euro and other currency.
This autumn. How about your following-sales service ?
A: one.Provide customers with installation and commissioning on the internet instructions.
2. Properly-educated engineers offered to abroad provider.
three.Worldwid agents and after support avaiable.arrange our engineers to support you training and installation.
Q5. How about your warranty?
A: 1 calendar year for the entire machine and two years for screw air stop, other than consumable spare areas.
Q6. Do you have any certification ?
A: Of course, per diverse customer’s marketplace require ,we can supply CE ,ISO and many others certification.
Q7. What about the maintenance ?
A: 1st routine maintenance need to have to be completed right after 500Hours, and then every 2000-3000 hours to do the typical servicing,
and contemplate the genuine setting.
Q8. How do you manage good quality ?
A: one.Raw- material in examining.
2.Assembly.
3.Worldwid right after services available.organize our engineers to aid you training and installation.
Q9. Do you provide OEM services ?
A: Yes.