Diaphragm CZPT one hundred% purity no leakage Oil-free of charge Oxygen Booster CZPT
The diaphragm compressor booster is a special construction of the quantity-variety compressor with substantial compression ratio, very good leak tightness, compressed gas with out lubricating oil and other reliable impurities contaminated features, So it really is suitable for high purity compression, uncommon, useful, inflammable, explosive, toxic, hazardous, corrosive, and higher force fuel
Positive aspects of Diaphragm compressor:
1. Oil-free compression thanks to the airtight separation amongst gas and oil chamber.
2. Abrasion-free compression because of to static seals in the gasoline stream
3. CZPT shutdown in case of a diaphragm failure stops injury
4. High Compression Ratios-Discharge pressure up to 1000bar.
5. Contamination Cost-free Compression
six. Corrosion Resistance
seven. High Trustworthiness
As a displacement compressor with specific,diaphragm compressor is characterized by big compression ratio,good sealing performace,and that the compress air will not be polluted by lubricant or other sound impurities.Consequently diaphragm compressor is applicable to compress high-purity,exceptional and cherished,flammable and explosive,toxic and harmful,corrosive and substantial pressure gases.
CZPT diaphragm compressors consist of four types that are Z,V,L and D type.The exhaust force ranges from one.3 to one hundred Mpa. The goods are commonly utilised in the industries of countrywide defense,scientific analysis,petrochemical,nuclear energy,parmaceutical,meals-stuff and fuel separation.
Inquiry to us!
Observe:for the other customizing method fuel compressor, remember to kindly deliver under information to our manufacturing unit to compute the generating price for your merchandise.
Clients’ inquiries ought to incorporate connected parameters
A. The gasoline compression medium
B. Gas composition? or the gas purity?
C. The flow price: _____Nm3/hr
D. Inlet force: _____ Bar (gauge pressure or absolute force)
E. Discharge pressure: _____ Bar (gauge stress or absolute stress)
F. Inlet temperature
G.Discharge temperature
H. CZPT h2o temperature as nicely as other complex need.
CZPT Paramter of Oil Free Diaphragm CZPT
| GZ sort Diaphragm CZPT CZPT Parameters | |||||||||
| No. | Model | F.A.D (Nm3/min) | Inlet Pressure ( Mpa) |
Exhuast Pressure (Mpa) |
Power (KW) |
Velocity r/min |
Dimension (L×W×H)mm |
N.W Weight (t) |
Voltage V |
| one | G2V-ten/8-a hundred and sixty | ten | .8 | sixteen | 5.five | 400 | 1550*900*1050 | .eight | 380 |
| 2 | G2V-5/3.5~one hundred fifty | five | .35 | fifteen | five.5 | four hundred | 1550*900*1050 | .eight | 380 |
| three | G2V-ten/4~320 | 10 | .four | 32 | five.five | 430 | 1650*850*1250 | .8 | 380 |
| 4 | G3V-240/5~twelve | 240 | .5 | 1.two | eighteen.five | 400 | 1860*1200*1585 | 2 | 380 |
| five | G3V-1200/75~eighty three | 1200 | 7.five | 8.3 | eighteen.5 | 400 | 1780*1050*1750 | one.eight | 380 |
| 6 | G3V-eighty/13~150 | 80 | 1~1.5 | fifteen | 22 | 330 | 2400*1350*1465 | two.one | 380 |
| 7 | G3V-30/five~315 | 30 | .five | 31.5 | fifteen | 400 | 2571*955*1455 | 1.8 | 380 |
| 8 | G3V-80/seven~a hundred and fifty | eighty | .7 | 15 | 22 | 400 | 2302*1385*1444 | two.five | 380 |
| 9 | G2V-twenty five/six~one hundred fifty | 25 | .six | 15 | seven.five | 400 | 1500*775*1075 | .eight | 380 |
| ten | G2.5V-ten/160 | ten | Typical | 16 | 7.five | 400 | 1650*1571*1400 | .ninety five | 380 |
| 11 | G2.5V-20/one~one hundred sixty | 20 | .one | sixteen | 11 | four hundred | 1650*1571*1400 | .95 | 380 |
| 12 | G2.5V-sixteen/two.five~one hundred sixty | 16 | .twenty five | 16 | 7.5 | 400 | 1650*1571*1400 | .ninety five | 380 |
| 13 | G3V-one hundred/24~125 | one hundred | 2.four | 12.5 | 22 | 400 | 2160*1250*1500 | one.8 | 380 |
| fourteen | G4V-220/ninety nine-349 | 220 | 7.~twenty five | 34.nine | 37 | four hundred | 2492*1840*1610 | three.2 | 380 |
| 15 | G2Z-45/one hundred fifty~350 | forty five | 10~20 | 35 | 7.five | four hundred | 1610*790*1380 | .fifty five | 380 |
| 16 | G2Z-five/thirty~four hundred | five | three | forty | five.five | 400 | 1560*790*1470 | .55 | 380 |
| seventeen | G2.5Z-30/32~170 | 30 | three.two | 17 | seven.five | 400 | 1550*650*1530 | .7 | 380 |
| 18 | G3Z-600/seventy five~eighty three | 600 | seven.five | 8.3 | 11 | 400 | 1780*1050*1750 | 1.three | 380 |
| 19 | G3Z-85/a hundred~350 | eighty five | five~twenty five | 35 | 18.five | 400 | 1900*1240*1760 | one.6 | 380 |
| 20 | G3Z-150/one hundred fifty~350 | one hundred fifty | 15 | 35 | 18.5 | four hundred | 1780*1050*1750 | one.8 | 380 |
| 21 | G2.5Z-40/7~30 | forty | .7 | 3 | 7.5 | 400 | 1653*1372*1470 | .9 | 380 |
| 22 | G2.5Z-100/twenty~35 | one hundred | 2 | 3.5 | five.five | 400 | 1330*750*1530 | .nine | 380 |
| 23 | GV3-one hundred ten/eight~one hundred fifty | a hundred and ten | .8 | 15 | 30 | four hundred | 2370*1458*1630 | 3 | 380 |
| 24 | G3V-one hundred fifty/three.five~30 | 150 | .35~.55 | 3 | 30 | four hundred | 2543*1835*2036 | 3.21 | 380 |
| twenty five | G3V-sixty/.38~nine.three | sixty | .038 | .ninety three | 15 | 400 | 2030*1520*1750 | 72 | 380 |
Principal technological data
Cylinder
All the cylinders comprise higher plate, diaphragms, and cylinder body and so forth. The diaphragms are clamped amongst the cylinder cover and cylinder human body. The cylinder cover and cylinder entire body each has a concave recess hollowed out in their getting in touch with faces. The fuel cylinder is shaped between cylinder go over concave recess and diaphragms. The two suction valve and discharge valve are equipped on the upper plate. Among of them, the discharge valve is found on the heart of the upper plate. The evenly found modest oil holes are on the cylinder entire body to supply the oil strain within the oil cylinder to the base of diaphragms (each diaphragm compressor’s cylinder has three piece diaphragm.)
Strain Regulating Valve
The oil stress of oil cylinder is controlled by the pressure of the valve spring.In situation the oil strain is greater than the regulated worth, change the regulating bolt counter-clockwise to loosen the spring stress, but turn the regulating bolt clockwise to tighten the spring, when the oil strain is reduced than the regulated price. When the oil pressure meets the necessary value, the regulating bolt must be locked with a lock-nut. The oil pressure of the oil cylinder shall always be larger than the discharge stress by 15~20%. But the oil and fuel differential strain shall not be reduced than .3MPa or larger than one.5MPa.
Cooler
The cooler framework is the double-wall pipe sort. The circular space in between the outer and inner pipe is the cooling drinking water passage and the interior pipe is the gasoline passage. Typically the water inlet port is at the reduce side and the water outlet port is at the upper aspect. The circulation course of cooling water and gas is on the opposite.
Oil Force Measuring Device
The measuring unit of oil cylinder discharge stress is composed of shock-evidence strain gauge, examine valve and unloading valve. The scenario of the force gauge is entirely airproof and stuffed with damping liquid. The interior units of gauge is immersed in the liquid, which can make the pressure gauge fingers steady via the purpose of the viscosity of damping liquid. The unloading valve is fitted under the gauge to discharge the remained air in the oil pipeline and to unload the oil pressure gauge. Also the examine valve connecting with oil cylinder by means of pipeline is fitted under the unloading valve.
Oil pipes
Oil pipes consist of lube oil pipe and oil force protected system.
The lubrication for the driving gadget adopts gear oil pump circulation force lubricating. The lube oil stored in the frame oil tank enters into the gear oil pump following being filtered and is pressed into the oil holes in the crankshaft through the gear oil pump to lubricate the crankshaft friction floor. At the identical time, portion of the lube oil reaches the crosshead pin and crosshead alongside the oil holes in the connecting rod to lubricate the friction surface area. The oil force of gear oil pump shall be retained between .3~.5Mpa, and the bearings at the two finishes of crankshaft is splash lubricated.
Oil pressure protected program is composed of oil compensating pipe, strain-measuring pipe and oil return pipe. The oil output from the oil compensating pump will complement oil for compressor cylinders through the oil compensating pipe and the extra oil returns to the crankcase by means of the stress-regulating valve.
FAQ
Q1: What’s your supply time?
A: CZPTly five-ten times if the merchandise are in inventory. Or it is 20-35 days if the items are not in stock, it is according to quantity.
Q2: How prolonged is your CZPT guarantee?
A: Typically 1 year /12 Months for whole compressor machine, 2years/24months for air end (except routine maintenance spare elements.). And we can provide additional warranty if necessary.
Q3: How extended could your CZPT be utilised?
A: CZPTly, more than 10 a long time.
This fall: Can you do OEM for us?
A: Sure, of course. We have close to two many years OEM experience.And also we can do ODM for you.
Q5: What is payment term?
A: T/T, L/C, D/P, CZPT CZPT, Paypal, Credit score Card, CZPT Assurance and and so forth. Also we could accept USD, RMB, GBP, Euro and other currency.
Q6: How about your customer services?
A: 24 several hours on-line support accessible. 48hours dilemma sovled promise.
Q7: How about your following-income service?
A: 1. Provide customers with intallation and commissioning online instructions.
two. Nicely-trained engineers available to abroad soon after-product sales provider.
Q8. Are you manufacturing facility?
A4: Definitely! You have touched the major sources of Air /Gas CZPT. We are factory.
How to get in touch with with us?
Ship your Inquiry Details in the Underneath, or Click on “Send out inquiry to provider” to check far more other Fuel CZPT device equipment!