NIKAI’s NT 800 is a double free-stream pallet conveyor transport system driven by flat belts, timing belts or accumulation roller chain. With this one model, we are able to realize procedures on the task piece from all 6 feasible sides. This conveyor is usually specially designed to coordinate the diverse operations, manual or automatic, during assembly or manufacturing.

One of the principal characteristics of the system is its flexibility where in a moment we can recognize conveying operations or basic assembly. Down the road, and going to to the new needs of clients, NIKAI can offer extensions by means of all of the available accessories such transfers, elevators, lifting and positioning stations, switch stations, stoppers, etc.

The mechanical facet of the system includes a chassis of extrusioned Conveyor Chain aluminium (two profiles linked together) where the upper part supports the conveying components (chain or timing belt) and above this, the pallets with their specific tooling.

For the proper sliding movement for the conveying components (chain or timing belt), the aluminium profiles have attached a yellow ceramic polyethylene materials when using chains and a PET support bed when working with timing belts.

Variants exist when the drives are in end or central position. In the attached drawing, the various configurations can be observed.

The tooling pallets consist of three parts: the sliding PET’s, the flange and the specific tooling required to move the task piece. The pallets can be stopped or accumulated by way of stopper units because the chain or the timing belt is not physically became a member of to the pallets involved.