Oxygen Filling CZPT Oxygen Fill Pump for CZPT
Oxygen filling pump is mostly employed for filling oxygen respiratory equipment and compressed oxygen self-rescuer
large-pressure fuel cylinder booster pump. It is the filling of oxygen or other non-flamable gases in the big gasoline
cylinders into one more fuel storage cylinder. can immediately manage the filling pressure.
It is an oxygen filling equipment that increases oxygen pressure from source bottle to another gas bottle, l
et the oxygen pressure of this gas bottle achieve the needed pressure. It is used for pump oxygen, nitrog
en and carbon dioxide from source gas bottle and fills in the gas bottle which is waiting for inflating.
Oxygen filling pump is primarily employed for mining, hospital support, is utilized for filling oxygen respirator,
compression oxygen for oxygen tanks, chemical, oil, health-related, hearth management and other relevant industries
when necessary.
| Design | AE101A | AE102A |
| Inflation pressure | 20Mpa | 30Mpa |
| Displacement under suction conditions | 5L/min | 3L/min |
| Voltage | 220V/380V | 220V/380V |
| Maximum compression ratio | 4 | 8 |
| CZPT stages | 1 | two |
| Energy | one.1KW | two.2KW |
| Working temperature | -60ºC | -60ºC |
| Dimension | 860*565*640mm | 940*five hundred*700mm |
| Bodyweight | 116kg | 120kg |
Oxygen filling pump Solution working Procedures
1 oxygen filling pump need to be chosen in a clean and dust-totally free place to work, the use of temperature must not be significantly less than ºC.
two The filling pump can be bolted to a horizontal base or put on a horizontal base desk. A thick rubber plate with damping in between the filling pump and the abutment
shall be in make contact with with the base station smoothly.
3 do not make contact with any Fat object in get in touch with with water _ glycerin lubrication liquid
.
four ahead of the 1st use, the mechanical oil need to be injected into the entire body, and after each and every alternative of mechanical oil, the human body have to be exterior the grease wipe clean.
Do not permit the oil from the higher and reduced human body joints, the sealing ring and the sealing cover outside the leakage.
5 Smoking cigarettes is prohibited in the spot of use, and rigid forbidden prohibition method ought to be set up. The filling workers have to use cleanse garments with no oil, and
must wash their fingers with soap prior to functioning.
6 Oxygen filling pump ought to be selected in a clean and non-greasy place to perform, the use of environmental encounters not considerably less than ºC, indoor lighting strains and electrical power
strains can not use the wire, the line connector should use explosion-evidence junction box, oxygen filling indoor storage of large oxygen cylinders need to not exceed the
upkeep of excellent air flow. The oxygen filling pump and the massive oxygen cylinder should be utilized in isolation.
seven filling pump to be horizontally placed on the ground, four legs cushion flat. Use the external air supply tube to connect the gas supply bottle with the filling pump
connecting pipe and the sealing ring of the physique relationship should be installed appropriately.
Application
• Mine rescue
• Firefighting
• Oil
• CZPT industry
• Metallurgy
• CZPT therapy
• Traffic
• CZPT
• National protection
