G6 collection diaphragm compressor attribute:
Small diaphragm compressors:
Structure: Z,L, P.D variety
CZPT: Splash
Oil kind: complusory oil dietary supplement
cooling way: water cooled or air cooled
upkeep optimum fat per piece: 1000kg
maintenance highest room: the circle shall be not much less than one.5 m
| Product | Circulation charge | Inlet stress | Outlet stress | Water squander | speed of crankshaft | Motor Power | Size | CZPT excess weight | |
| Nm³/h | MPa(G) | MPa(G) | L/h | r/min | kW | L*W*H mm | t | ||
| one | GD6-2400/ten-250 | 2400 | one | 25 | 50000 | 372 | 560 | 6200*4800*2500 | 43 |
| 2 | GD6-22000/290-305 | 22000 | 29 | thirty.five | 5000 | 372 | ninety | 5800*4200*2500 | 36 |
| 3 | GD6-3600/19-305 | 3600 | 19 | 30.5 | 50000 | 375 | 560 | 5800*4200*2500 | forty |
| four | GD6-6000/fifty-55 | 6000 | 5 | 5.5 | 5000 | 375 | seventy five | 5800*4200*2500 | 28 |
| five | GD6-4000/50-300 | 4000 | 5 | 30 | 50000 | 375 | 560 | 5800*4200*2500 | forty |
| 6 | GD6-6000/50-a hundred and twenty | 6000 | five | twelve | 30000 | 375 | 315 | 4500*3200*2200 | 19 |
| seven | GD6-2100/seven-230 | 2100 | .7 | 23 | 50000 | 375 | 560 | 6200*4800*2500 | forty three |
| 8 | GD6-2500/forty five-220 | 2500 | 4.five | 22 | 25000 | 375 | 280 | 4500*3200*2200 | 17 |
| nine | GD6-1700/25-138 | 1700 | 2.5 | 13.8 | 18000 | 375 | 185 | 4200*3000*2200 | sixteen |
| 10 | GD6-11200/one hundred fifteen-138 | 11200 | 11.five | thirteen.eight | 11000 | 375 | a hundred and ten | 4200*3000*2200 | sixteen |
| eleven | GD6-2000/twelve-ninety | 2000 | one.2 | nine | 30000 | 375 | 315 | 4500*3200*2200 | 19 |
| 12 | GD6-4000/12-ninety | 4000 | 1.two | nine | 60000 | 375 | 630 | 5800*4200*2500 | forty one |
CZPT info of framework
Diaphragm compressor mostly consists of crankcase, connecting rod, cross-head, piston, cylinder body, cooler and its pipeline, base plate, instrumentation, electric motor and so on. The compressor framework is divided into 4 varieties—L, Z, V and D, in accordance to cylinder entire body arrangement.
L kind diaphragm compressor’s vertical and horizontal cylinders type L. (Please refer to the picture)
Z sort diaphragm compressor only is made up of vertical cylinders, and this composition looks like the letter “Z”. (Remember to refer to the photograph)
V kind diaphragm compressor’s left and appropriate cylinders sort V. (You should refer to the image)
D type diaphragm compressor is the balanced opposed frame, the cylinder entire body variety can be two, 3 or 4. (Please refer to the photograph. This is the 4 cylinders type)
Primary technical information
Cylinder
All the cylinders comprise upper plate, diaphragms, and cylinder human body etc. The diaphragms are clamped in between the cylinder cover and cylinder body. The cylinder protect and cylinder human body each has a concave recess hollowed out in their contacting faces. The gasoline cylinder is shaped amongst cylinder include concave recess and diaphragms. Equally suction valve and discharge valve are equipped on the higher plate. Among of them, the discharge valve is found on the middle of the upper plate. The evenly found tiny oil holes are on the cylinder human body to supply the oil stress inside of the oil cylinder to the diaphragms.
Pressure Regulating Valve
The oil force of oil cylinder is regulated by the tension of the valve spring.In circumstance the oil stress is increased than the controlled value, flip the regulating bolt counter-clockwise to loosen the spring stress, but change the regulating bolt clockwise to tighten the spring, when the oil pressure is reduce than the controlled worth. When the oil strain meets the essential worth, the regulating bolt need to be locked with a lock-nut. The oil force of the oil cylinder shall always be greater than the discharge stress by fifteen~20%. But the oil and fuel differential force shall not be lower than .3MPa or increased than one.5MPa.
Cooler
The cooler composition is the double-wall pipe type. The circular area in between the outer and inner pipe is the cooling water passage and the inner pipe is the gas passage. Typically the drinking water inlet port is at the reduce side and the h2o outlet port is at the upper aspect. The flow course of cooling h2o and gas is on the opposite.
Oil Strain Measuring Device
The measuring unit of oil cylinder discharge stress is made up of shock-proof force gauge, check valve and unloading valve. The case of the force gauge is absolutely airproof and stuffed with damping liquid. The internal devices of gauge is immersed in the liquid, which tends to make the strain gauge fingers steady via the function of the viscosity of damping liquid. The unloading valve is equipped under the gauge to discharge the remained air in the oil pipeline and to unload the oil pressure gauge. Also the verify valve connecting with oil cylinder via pipeline is fitted below the unloading valve.
Oil pipes
Oil pipes consist of lube oil pipe and oil strain secure method.
The lubrication for the driving device adopts gear oil pump circulation force lubricating. The lube oil saved in the frame oil tank enters into the gear oil pump after being filtered and is pressed into the oil holes in the crankshaft by means of the gear oil pump to lubricate the crankshaft friction surface area. At the identical time, portion of the lube oil reaches the crosshead pin and crosshead alongside the oil holes in the connecting rod to lubricate the friction area. The oil strain of gear oil pump shall be held among .3~.5Mpa, and the bearings at the two ends of crankshaft is splash lubricated.
Oil stress protected program is composed of oil compensating pipe, stress-measuring pipe and oil return pipe. The oil output from the oil compensating pump will supplement oil for compressor cylinders via the oil compensating pipe and the surplus oil returns to the crankcase via the force-regulating valve.
Gasoline pipes
The fuel enters into compressor by way of inlet port to be compressed and enters into the clients’ program following cooling by the cooler.
