Tie rod style hydraulic cylinders use large power threaded steel rods to hold the two finish caps to the cylinder barrel. This method of design is most often seen in industrial factory apps. Small bore cylinders typically have four tie rods, whilst big bore cylinders could demand as a lot of as 16 or twenty tie rods in buy to retain the end caps under the remarkable forces developed. Tie rod design cylinders can be totally disassembled for support and repair.
The National Fluid Electrical power Association (NFPA) has CZPTized the proportions of hydraulic tie rod cylinders. This allows cylinders from diverse manufacturers to interchange within the exact same mountings.
2500 psi Bore: 2.0” Stroke: 4” – 36” Double Acting Tie Rod Cylinder
| Element Variety | Rod Dia. | Bore x Stroke | Proportions | Port Measurement | Pin Size | Excess weight (lbs) | |
| Retracted | Extended | ||||||
| TTR25-2004 | 1 one/8” | 2”*4” | fourteen one/4” | eighteen one/4” | 3/8NPT | 1” | 15 |
| TTR25-2006 | 2”*6” | sixteen one/4” | 22 1/4” | 16 | |||
| TTR25-2008 | 2”*8” | eighteen 1/4” | 26 one/4” | eighteen | |||
| TTR25-2008-ASAE | 2”*8” | twenty one/4” | 28 one/4” | 19 | |||
| TTR25-2571 | 2”*10” | twenty 1/4” | 30 1/4” | 19 | |||
| TTR25-2012 | 2”*12” | 22 1/4” | 34 1/4” | twenty | |||
| TTR25-2014 | 2”*14” | 24 one/4” | 38 one/4” | 22 | |||
| TTR25-2016 | 2”*16” | 26 1/4” | 42 one/4” | 24 | |||
| TTR25-2018 | 2”*18” | 28 one/4” | 46 1/4” | 26 | |||
| TTR25-2571 | 2”*20” | 30 1/4” | 50 1/4” | 27 | |||
| TTR25-2571 | 2”*24” | 34 one/4” | fifty eight 1/4” | 30 | |||
| TTR25-2030 | 2”*30” | forty one/4” | 70 one/4” | 35 | |||
| TTR25-2036 | 2”*36” | 46 1/4” | eighty two 1/4” | 40 | |||
| Component Amount | INSIDER DIAMETER | OUTSIDER DIAMETER | *A | B | *C | *D | *E | F | *G | H | I | *J | ROD THREAD | PORT |
| TTR2.5-twenty- | 2.00” | two.37” | 10.25” | 2.00” | one.01” | 2.00” | three.75” | two.25” | one.12” | two.06” | two.12” | two.62” | 1.a hundred twenty five-12 UNF | 3/8NPT |
| TTR2.five-twenty five- | 2.50” | 2.87” | 10.25” | two.00” | 1.01” | 2.25” | three.75” | 2.25” | 1.12” | two.06” | two.12” | 2.62” | one.a hundred twenty five-twelve UNF | three/8NPT |
| TTR2.5-30- | three.00” | 3.37” | 10.25” | two.00” | 1.01” | 2.25” | 3.75” | two.25” | 1.12” | 2.06” | 2.12” | two.62” | one.250-twelve UNF | 1/2NPT |
| TTR2.five-35- | 3.50” | 3.87” | 10.25” | two.00” | 1.01” | 2.25” | three.62” | two.50” | one.12” | two.06” | two.12” | 2.62” | one.250-twelve UNF | one/2NPT |
| TTR2.5-40- | four.00” | four.37” | ten.25” | two.25” | one.01” | 2.25” | 3.56” | 2.62” | 1.12” | 2.06” | 2.12” | 2.62” | one.250-12 UNF | 1/2NPT |
| TTR2.five-50- | 5.00” | 5.37” | twelve.25” | two.87” | 1.26” | two.75” | four.18” | 3.50” | 1.12” | 2.25” | two.12” | 3.31” | 1.five hundred-twelve UNF | 1/2NPT |
| *FOR 8.00” ASAE STROKE: *A=12.25” AND FOR 16.00” ASAE STROKE:*A=fifteen.50” | ||||||||||||||
| *FOR 8.00” STROKE: *E=5.75”(two.00” TO three.00” BORE) *E=5.62”(3.50” BORE) *E=five.56”(4.00” BORE) | ||||||||||||||
| *FOR 16.00” ASAE STROKE: *E=9.00”(two.00” TO three.00” BORE) *E=eight.87”(three.50” BORE) *E=8.81”(4.00” BORE) | ||||||||||||||
| *FOR TTR2.five-2518 TO TTR2.five-2536 ROD THREAD= 1.one hundred twenty five-12 UNF | ||||||||||||||
| *FOR TTR2.5-4016-ASAE TO TTR2.five-4036 *D=2.50” *J=2.75” ROD THREAD= 1.five hundred-12 UNF | ||||||||||||||
| *FOR 16.00” ASAE STROKE: *C=1.26” | ||||||||||||||
| SEAL TEMPERATURE Range:-30Celsius/+100Celsius(-22Fahrenheit/+212Fahrenheit) | ||||||||||||||
| SEAL Optimum Velocity:3 FT/SEC | ||||||||||||||
| Maximum RETRACTED Operating Strain=2500 PSI | ||||||||||||||
| Proportions A AND E ARE FOR REFERENCES ONLY AS CLEVIS IS ADJUSTABLE | ||||||||||||||
HangZhou Tianlong CZPTry CZPT Co., Ltd is an business that concentrates on R&D, production and income of hydraulic cylinders, which was established in Oct of 1998.
Tianlong owns a CZPT plant masking eight,000 square meters, with sixty staff. Its yearly output is close to 100,000 sets of hydraulic cylinders that are primarily exported to North CZPTica, CZPTe, Australia and South Africa.
In regard of the services in Tianlong, all of them are made and arranged in accordance with international manufacturing CZPTs. Tianlong keeps rising expense in its manufacturing amenities, all around $five hundred,000 for every single 12 months. We have obtained the ISO9001:2000 high quality method certification for good quality administration.
The items can be categorized into 7 sorts
(one) Welded Cylinders
(2) Tie-rod Cylinders
(three) CZPT Plow Cylinders
(4) Telescopic Cylinders
(5) Non-CZPT/ CZPT Cylinders
(six) Servo Technique Cylinders
(seven) Cylinders for car upkeep, these kinds of as scissor lifts.
“CZPT 1st, Buyer 1st, Credit Initial and Following-income First” is the philosophy held in minds of the entire staff from Tianlong. By its tens of several years of expertise in superior engineering, good expertise and equipments, it is refining every little thing phase by step and making itself well-recognized globally.