Item Information
| Solution Identify: CZPT Mini Stationary Air CZPT |
| Design number: ZW-7.5 |
| Greatest Pressure:10BAR/145PSI |
| Operating Stress: seven – 10bar (one hundred – 145psi) |
| Air Supply/capability: one – one.2m3/min |
| Motor Energy: seven.5kw/10hp |
| Lubricating H2o Sum: 20 L |
| Rotation Rate : 2940 rpm |
| Sound Amount: 70 dBA |
| Variety of Driving: Directly CZPTn |
| Sort of CZPT: Air CZPT/Drinking water CZPT |
| Dimension: 1135×800×1000 mm |
| Bodyweight: 480kg |
| Air Outlet Discharge Dimensions: G1″ |
Parameters
| MCZPTL | Maximum Doing work Stress | Cost-free AIR Delivery* OF Unit AT Doing work Force | MOTOR | Sounds Degree | Lubricating Water | Rotation Charge | AIR OUTLET DISCHARGE Dimensions | Bodyweight | Dimensions | ||||
| Sum | |||||||||||||
| Bar | PSI | l/s | CFM | m3/min | kW | HP | dBA | L | rpm | (mm) | KG | (mm) | |
| ZW-7.five | seven | 102 | twenty | forty three | one.2 | 7.5 | 10 | 61 | 20 | 2940 | G1 | 480 | 1135×800×1000 |
| 8 | 116 | eighteen | 39 | 1.one | |||||||||
| ten | a hundred forty five | 17 | 36 | one | |||||||||
| ZW-11 | seven | 102 | 27 | 57 | one.6 | eleven | fifteen | sixty one | 20 | 2940 | G1 | 500 | 1135X800×1000 |
| eight | 116 | twenty five | 54 | one.five | |||||||||
| ten | one hundred forty five | 22 | 46 | 1.3 | |||||||||
| ZW-fifteen | seven | 102 | forty | 86 | 2.4 | fifteen | twenty | sixty one | 27 | 2940 | G1 | 520 | 1400×1000×1200 |
| eight | 116 | 38 | 82 | two.3 | |||||||||
| ten | a hundred forty five | 33 | 78 | 2 | |||||||||
| ZW-eighteen.five | 7 | 102 | fifty two | 111 | three.one | eighteen.5 | 25 | sixty one | 27 | 2940 | G1 | 520 | 1400×1000×1200 |
| 8 | 116 | forty seven | one hundred | 2.eight | |||||||||
| 10 | one hundred forty five | 42 | 89 | 2.five | |||||||||
| ZW-22 | 7 | 102 | sixty two | 132 | three.seven | 22 | thirty | 61 | 27 | 2940 | G1 | 560 | 1400×1000×1200 |
| 8 | 116 | 57 | 121 | three.four | |||||||||
| ten | one hundred forty five | fifty | 107 | 3 | |||||||||
| ZW-30 | seven | 102 | 87 | 186 | five.2 | 30 | forty | sixty four | forty | 2940 | G11/two | 1050 | 1920×1170×1320 |
| 8 | 116 | seventy eight | 168 | four.seven | |||||||||
| 10 | one hundred forty five | 72 | 154 | four.three | |||||||||
| ZW-37 | seven | 102 | 102 | 218 | 6.1 | 37 | fifty | sixty six | 40 | 2940 | G11/two | 1050 | 1920×1170×1320 |
| eight | 116 | 93 | two hundred | five.6 | |||||||||
| ten | a hundred forty five | 83 | 179 | 5 | |||||||||
| ZW-forty five | 7 | 102 | one hundred twenty five | 268 | seven.five | forty five | 60 | 66 | forty | 2960 | G2 | 1610 | 1920×1170×1320 |
| eight | 116 | 113 | 243 | 6.eight | |||||||||
| ten | 145 | 100 | 214 | 6 | |||||||||
| ZW-55 | seven | 102 | 167 | 357 | 10 | 55 | seventy five | sixty six | 100 | 2960 | G2 | 1610 | 1930×1320×1535 |
| 8 | 116 | 150 | 321 | 9 | |||||||||
| 10 | a hundred forty five | a hundred thirty | 214 | seven.8 | |||||||||
| ZW-75 | seven | 102 | 271 | 357 | thirteen | 75 | 100 | 70 | one hundred | 2960 | G2 | 1880 | 1930×1320×1535 |
| 8 | 116 | two hundred | 321 | twelve | |||||||||
| 10 | 145 | 167 | 279 | ten | |||||||||
| ZW-90 | seven | 102 | 258 | 464 | 15.5 | 90 | 125 | 70 | 180 | 2970 | DN80 | 2700 | 2150×1600×1000 |
| 8 | 116 | 233 | 429 | 14 | |||||||||
| 10 | one hundred forty five | 208 | 357 | twelve.five | |||||||||
| ZW-a hundred and ten | 7 | 102 | 333 | 554 | 20 | 110 | one hundred fifty | 72 | 200 | 2970 | DN80 | 3100 | 2150×1600×1000 |
| eight | 116 | 300 | five hundred | eighteen | |||||||||
| 10 | a hundred forty five | 267 | 466 | 16 | |||||||||
| ZW-132 | 7 | 102 | 417 | 893 | 25 | 132 | one hundred eighty | 72 | 240 | 2970 | DN80 | 3250 | 2150×1600×1000 |
| 8 | 116 | 383 | 821 | 23 | |||||||||
| ten | a hundred forty five | 333 | 814 | 20 | |||||||||
Rewards
| √ Straightforward |
| A single screw rotor and two gate rotors which are positioned at proper angle to the axis represent two compressing rooms. For that reason, the screw rotor with six grooves compresses as a lot of as 12 occasions for every rotation. |
| √ Quietness |
| Without having making use of thrust load to the axis direction of the rotor, the pressure in the circumference course rotates quietly with excellent harmony. As a outcome, the load to the bearing is lightened, reducing the generation of sounds or vibration. |
| √ Longevity |
| The gate rotors are rotated pursuing the rotation of the screw rotor together its equipment. The water film formed on the screw rotor’s gear and the free of charge floating mechanism maintains the higher efficiency for a extended time (in scenario of water lubrication). |
| √ Large Efficiency |
| Because the lubrication water is jetted in the compressing process, the compression is carried out smoothly beneath virtually even temperature, recognizing excellent, risk-free and extremely efficient compression with slow rotation (in situation of drinking water lubrication). |
| Comparison | H2o Lubricated oil-free of charge solitary screw CZPT | Dry oil-totally free double screw CZPT |
| Air Discharge Temp | About 50ºC | About 180-200ºC |
| Clearance Quantity | Rotor has been utilised two times by way of one particular circulation No clearance volume remaining |
Rotor has been utilised when by way of one particular circulation Current clearance quantity |
| Air Shipping and delivery | Perfect isothemal compression,air shipping volume5%-12% more | CZPT dropped thanks to sizzling air discharge |
| Performance | Typically:59-6.4 kw/(m3/min) | Usually:six.-six.6 kw(m3/min) |
| Air CZPT | one hundred% oil-cost-free | Oil in the equipment,high threat of air high quality |
| Air Purity | Purified by h2o,clear air soon after separation | Directly compressed then discharge,containing dust and oil stain |
| Composition Balance | Radial and axial hundreds cancel each other | Radial load is not been well balanced |
| Sounds and Vibration | Simple composition,Reduced vibration and less noise,Normally:sixty-65 dB(A) | Higher frequency sound due to screw grinding,Usually:sixty four-seventy eight dB(A) |
| Longevity | Rotation pace 3000r/min,theoretically zeao load,prolonged lifetime of screw(30000h),star wheel(50000h) | Rotation speed 18000r/min,large loads on crews,limited life time of screw(8000-18000h) |
| Installation | Only a handful of spare areas,canbe set up and modified individually | Sophisticated design,wants special specialized assistance for installation |
| Routine maintenance | Only replaced air filter and water filter,straightforward maintenance and reduced cost | A lot of spare elements and much less upkeep cycle,substantial cost |
Software
CZPT Options
| ? Does the drinking water corrode the CZPT technique? |
| Drinking water lubricated compressor is attractive to use pure consuming water CZPTs,areas and supplies is conform to the intercontinental CZPT grades of 304 and 316 stainless metal,will in no way rust. |
| ? Does the h2o impact the services lifestyle of bearings? |
| Uses a high-tech nanotechnology,CZPT silicon carbide bearing and ceramic bearing,lubrication with h2o straight,will not likely any troubles |
| ? Will the performance of h2o lubrication oil free compressor go down? |
| CZPT is the only genuinely grasp the essence of a single screw producing business in the entire world,inherited the Germany hundred procedures and systems,so the air conclude guarantee for two several years,the provider existence of up to 10 a long time or more,a one screw air end efficiency does not lower a lot more than five% following six a long time. |
| ? Does the drinking water sort scale? |
| Method utilizes pure h2o which is accord with driking drinking water CZPTs,water has been circulating in the systemand every single 200hours overall,the method will immediately change the drinking water,make sure the h2o dows not enhance the calcium content material,and actively running a tempreature not larger than 50ºC,there is no chance of fouling. |
| ? Is the drinking water content in h2o lubrication compressor air high? |
| Soon after air compression,the h2o content has arrived at saturation,the h2o material of the compressed air only connected to the tempreature,there is no connection with other,the temperature of the compressed air created by drinking water lubrication unit is not increased than 50ºC,so the h2o lubricated compressed air dampness than other varieties of compressors models. |
Product sales Service
Professional on the web expert to remedy your question about compressor program.
√ Totally free website layout expert, and power saving solution to help you help save procedure value.
√ Negotiable technician available to service equipment overseas.
√ On the web professional following-service right up until solve the problem.
√ 1 12 months guarantee soon after commissioning or sixteen months in opposition to transport day, it relies upon on which one particular come to start with for the whole
equipment(apart from routine maintenance consumable).
√ A sufficient number of spare elements are available, make certain the good right after service.
Certificate
About CZPT
|
CZPT CZPT
|
RFQ
Q1. Are you investing business or manufacture ?
A: We are skilled manufacture of screw CZPT far more than eight years.
Q2. How long is the shipping and delivery time ?
A: For CZPT voltage ,15 functioning days. Non-CZPT ,make sure you speak to our product sales.
Q3. What’s payment term ?
A: T/T, L/C, D/P, CZPT CZPT, Paypal, Credit history Card, and etc. Also we could acknowledge USD, RMB, Euro and other forex.
This fall. How about your right after-revenue provider ?
A: 1.Provide consumers with set up and commissioning on the web directions.
2. Well-trained engineers available to abroad support.
three.Worldwid brokers and following support avaiable.prepare our engineers to support you education and set up.
Q5. How about your guarantee?
A: A single 12 months for the entire machine and two a long time for screw air stop, besides consumable spare areas.
Q6. Do you have any certificate ?
A: Indeed, per various customer’s marketplace need to have ,we can offer you CE ,ISO and so on certification.
Q7. What about the routine maintenance ?
A: 1st routine maintenance want to be completed soon after 500Hours, and then every 2000-3000 several hours to do the standard servicing,
and take into account the true environment.
Q8. How do you control quality ?
A: one.Uncooked- materials in checking.
2.Assembly.
3.Worldwid soon after support offered.set up our engineers to assist you instruction and set up.
Q9. Do you offer you OEM services ?
A: Indeed.