Gear Boxes For Rotary Cutter’s, Shredders, and Choppers

Product description
RC thirty Sequence Gearbox, 40hp Rated, one-three/eight” SB enter, 1-one/2″ X 12 Spline Output. one:one.47 Ratio Exchange your damaged rotary cutter gearbox with this substitution unit. Why rebuild when you can exchange at these kinds of a minimal value? These gearboxes have been used by Worksaver, HawkLine, International, WAC, Large Bee, LMC, King Kutter, Midwest, Servis, Bush Hog, some Howse and many much more. Observe: Real Gearbox may possibly have a rounded housing or square as revealed, relying on existing availability, all interior areas are interchangeable and specs for both containers are similar! This gearbox attributes a one:one.forty seven Speed Up gear ratio for use on 5′ and bigger diameter rotary cutters. Sector normal 1-3/8″ smooth diameter enter shaft with one/two” shear bolt hole and retaining ring groove and 1.57″ diameter 12 tapered spline output shaft allow fitment to most light-weight, normal and medium responsibility rotary cutters. Every gearbox characteristics large velocity ball bearing units and heat dealt with gears and shafts to make sure prolonged existence. Four bolt mounting matches industry expectations. Every gearbox includes blade provider mounting nut and cotter pin. Gearboxes are shipped dry and need 16 ounces of 80-90W gearlube or equal. Disclaimer: Any and all Unique Equipment Manufacturer’s (OEM) tradenames, emblems, drawings, hues, descriptive information and element numbers are utilised for areas identification functions only, and DN Equipment, LLC (DN) is in no way implying that any specific areas are OEM components. Additional, any use of the OEM’s tradenames, logos, drawings or part figures by DN is created only to assist DN’s buyers, in getting the proper DN element or part which will exchange the OEM’s part.

rotary cutter gearbox

Gearboxes operate to administer a transfer of pace and torque by way of their internal equipment rotation, supporting the total efficiency of your rotary cutter. This RW-710-6S gearbox operates at 75-90 HP. The housing is built from tough ductile iron and the input shaft measures 1-3/eight in., with six splines. It has a equipment ratio measuring 1:1.46, and is designed for use with five ft., 6 ft., and seven ft. rotary cutters. A lot more size and much more HP method please get in touch with us for specifics.