Model: DC-30A
Cost-free air supply: 3.6m3/min
Operating stress: 8bar
CZPT air stop rotor lobe: 5:six
Model of screw air finish: CZPT ZheJiang AB+ sequence with six pcs SKF bearings
Manage: Mircro PLC controller
CZPTn: direct coupling
CZPT: by air
CZPTtric motor: 30hp 22kW 380V/3PH/50HZ,IP54 defense stage
Discharge temperature: less than ambient +8 ºC
Noise: much less than 68 dB(A)
Air outlet measurement: G1″
Dimension: 1330*830*1265mm
Fat: 400kg
Warranty: 24 months for the screw air conclude,12 months for the whole established compressor except air filter,oil filter and oil/air separator.
Supply time: twenty five times soon after getting deposit.
Advantages
Air conclude
one.SAP sort line to improve the screw compression efficiency Related items help save more than five%
2.Large machining accuracy, lower vibration of main machine and low sound
3.CZPTed National Degree one CZPT Efficiency Standard.
Motor
one.Productive design and style, SKF bearings, guarantee the prolonged existence of the motor.
2.IP54 secured completely enclosed motor, fear-free in harsh problems run.
3.Standard phase sequence safety to avert reversal.
Large Touch Grasp Controller
one.Matching inverter unique customization.
2.Liquid crystal display Chinese and English change display.
3.Abundant self-diagnostic features this kind of as fault alarm, upkeep reminder, automated shutdown, and many others.
four.Clock function, can established timing switch.
five.A number of signal outputs: RS485 port.
CZPT
1.ABB / Siemens brand vector manage frequency conversion system, frequency conversion reaction speed is quicker.
two.Continuous force output to take away pressure fluctuation and off-load.
3.Continual temperature output at 9~85°C, Low commencing current to shield components,15% power-conserving.
Pre-filter CZPT
one.Distinctive pre-filter go over layout to preserve the inside of of the device thoroughly clean and extend the maintenance cycle.
2.Simple to disassemble and thoroughly clean, and can be reused.
Efficient CZPT System
one.Adopting large-dimension higher-efficiency cooler to cope with severe functioning conditions.
2.Undertake independent large admirer blended with oil cooling system, lower temperature and much more steady.
CZPTtrical Method
1.Standardized design, secure and reputable.
two.Expert wiring interface,the wiring is realistic, simple, very clear and straightforward to sustain.,
three.Schneider and Siemens are equipped with a collection of substantial-level components, and their safe use is guaranteed for a prolonged time.
Immediate CZPT
one.one: 1 direct drive, steady and efficient.
2.Adopts much more mature break up-kind immediate drive, which is a lot more reputable and simpler to preserve than integrated travel.
three.CZPTed manufacturer, huge measurement coupling to make certain the extended daily life of the travel technique.
Adaptable
For some areas with inadequate operating conditions these kinds of as large temperature and high humidity,large-area plate heat exchangers and high-efficiency air coolers are utilized.
Exhaust pipe
The exhaust pipe adopts double-layer bellows,and the oil passage adopts unique temperature resistance of a hundred twenty five °C large-strain hose.
CZPT Parameters:
Design | Discharge Stress | Discharge Air Quantity | Motor Energy | Dimension(mm) | Discharge Pipc.Dia | Unit Fat |
SEF350Z | .8MPa | ten.0m³/min | 55KW | 1900X1270X1570 | 1X2″ | 1560KG |
1.0MPa | 9.0m³/min | |||||
1.3MPa | seven.8m³/min | |||||
SEF460Z | .8MPa | 13m³/min | 75KW | 1900X1270X1570 | 1X2″ | 1731KG |
one.0MPa | 11.8m³/min | |||||
one.3MPa | nine.6m³/min | |||||
SEF565Z | .8MPa | sixteen.0m³/min | 90KW | 2620X1670X1800 | 1X2″ | 2260KG |
one.0MPa | 14.2m³/min | |||||
one.3MPa | twelve.2m³/min | |||||
SEF710Z | .8MPa | twenty.5m³/min | 110KW | 2620X1670X1800 | 1X2″ | 2770KG |
one.0MPa | seventeen.8m³/min | |||||
one.3MPa | fifteen.5m³/min | |||||
SEF780Z | .8MPa | 23.5m³/min | 132KW | 2620x1670x1800 | 1×2″ | 2926KG |
one.0MPa | twenty.5m³/min | |||||
1.3MPa | seventeen.0m³/min | |||||
SEF1060Z | .8MPa | 30.0m³/min | 160KW | 3070X2140X2130 | DN80 | 4100KG |
1.0MPa | 26.0m³/min | |||||
1.3MPa | 22.0m³/min | |||||
SEF1165Z | .8MPa | 32.0m³/min | 185KW | 3070X2140X2130 | DN80 | 4400KG |
one.0MPa | 28.5m³/min | |||||
1.3MPa | 25.0m³/min | |||||
SEF1270Z | .8MPa | 35.0m³/min | 200KW | 3420X2220X2130 | DN100 | 5200KG |
1.0MPa | 31.0m³/min | |||||
1.3MPa | 27.0m³/min | |||||
SEF1420Z | .8MPa | 41.0m³/min | 250KW | 3420x2220X2130 | DN100 | 5300KG |
1.0MPa | 39.0m³/min | |||||
one.3MPa | 35.0m³/min | |||||
SEF1765Z | .8MPa | 50m³/min | 280KW | 4200X2380X2550 | DN125 | 5600KG |
one.0MPa | 42m³/min | |||||
SEF1980Z | .8MPa | 56m³/min | 315KW | 4200X2380X2550 | DN125 | 7980KG |
1.0MPa | 50m³/min | |||||
one.3MPa | 43m³/min | |||||
SEF2190ZW | .8MPa | 63m³/min | 355KW | 3690X2350X2150 | DN125 | 7350KG |
1.0MPa | 55m³/min | |||||
1.3MPa | 47m³/min | |||||
SEF2580ZW | .8MPa | 73m³/min | 400KW | 4070X2300X2250 | DN150 | 8100KG |
1.0MPa | 63m³/min | |||||
1.3MPa | 53m³/min | |||||
SEF2860ZW | .8MPa | 81m³/min | 450KW | 4070X2300X2250 | DN150 | 8500KG |
1.0MPa | 71m³/min | |||||
1.3MPa | 60m³/min | |||||
SEF3145ZW | .8MPa | 89m³/min | 500KW | 4300X2350X2150 | DN150 | 9000KG |
1.0MPa | 79m³/min | |||||
1.3MPa | 67m³/min | |||||
SEF3530ZW | .8MPa | 100m³/min | 560KW | 5000X2350X2150 | DN200 | 10000KG |
SEF3885ZW | .8MPa | 110m³/min | 630KW | 5000X2350X2150 | DN200 | 11000KG |
Product HIGHLIGHTS
1.The brand electrical power,trustworthy top quality, steady performance.
The severe thermal equilibrium serviceability can promise that the device operate properly underneath large temperature environment (≤40ºC)
2.Unique patent design, mild load startup system
3.Successful cooling technique, divided into three elements: water- cooled ,mid- cold, oil cold, which make certain the reliable operation of diesel motor, and it is suitable for high temperature functioning setting
four.Independent research and growth of the reverse door style, rational structure, which is straightforward to do standard maintenace ,with benefits of the mounted and moveable compressor
5.A solitary stage lifting, forklift hole unit, geared up with drag ring.It is suited for fix auto transportation, simple to transfer and installation of the device
6.Water-resistant and dustproof design and style, which is appropriate for out of doors difficult operating environment
seven.In accordance to consumer requirements, the heating boiler and distant elements is available for chilly beginning
Solution Purposes:
CZPT and CZPT
Our staff pack the examined CZPTs in wooden cases. Following the packaging is finished, the CZPT will be transported to the port and then delivery to the planet.
Our Exhibition
Our service
1.Pre-sale support:
Act as a good adviser and assistant of clients enable them to get rich and generous returns on their investments .
one.Select tools design.
2.Layout and manufacture products in accordance to client’s unique need
three.Train specialized personnel for customers .
2.Companies in the course of the sale:
one.Pre-examine and settle for items forward of delivery .
two. Help customers to draft resolving programs .
3.Following-sale solutions:
Give thoughtful services to decrease clients’ anxieties.
1.CZPT After-revenue services,expert engineers obtainable to service machinery at house or oversea.
2. 24 hours technical help by e-mail.
three.Other essential technological services.
Speak to specifics: