Model: DC-30A
Free of charge air supply: 3.6m3/min
Operating stress: 8bar
CZPT air stop rotor lobe: five:6
Manufacturer of screw air conclude: CZPT ZheJiang AB+ sequence with 6 pcs SKF bearings
Management: Mircro PLC controller
CZPTn: immediate coupling
CZPT: by air
CZPTtric motor: 30hp 22kW 380V/3PH/50HZ,IP54 defense level
Discharge temperature: significantly less than ambient +eight ºC
Sound: considerably less than 68 dB(A)
Air outlet dimensions: G1″
Dimension: 1330*830*1265mm
Fat: 400kg
Guarantee: 24 months for the screw air end,twelve months for the whole set compressor except air filter,oil filter and oil/air separator.
Delivery time: twenty five days after getting deposit.
Advantages
Air finish
1.SAP variety line to optimize the screw compression efficiency Similar items preserve a lot more than 5%
2.High machining precision, lower vibration of main machine and lower sounds
3.CZPTed National Amount 1 CZPT Performance Standard.
Motor
one.Effective design, SKF bearings, guarantee the prolonged existence of the motor.
two.IP54 protected entirely enclosed motor, be concerned-free in severe problems operate.
3.Standard phase sequence defense to prevent reversal.
Massive Contact Grasp Controller
1.Matching inverter exceptional customization.
2.Lcd Chinese and English switch show.
3.Rich self-diagnostic features such as fault alarm, routine maintenance reminder, computerized shutdown, and so forth.
4.Clock purpose, can established timing switch.
5.Several signal outputs: RS485 port.
CZPT
1.ABB / Siemens brand name vector management frequency conversion method, frequency conversion response velocity is faster.
two.Consistent pressure output to remove stress fluctuation and off-load.
3.Continual temperature output at 9~85°C, Minimal starting up existing to shield parts,15% power-preserving.
Pre-filter CZPT
one.Distinctive pre-filter go over style to preserve the inside of the machine thoroughly clean and prolong the upkeep cycle.
2.Straightforward to disassemble and thoroughly clean, and can be reused.
Productive CZPT Program
one.Adopting massive-measurement higher-effectiveness cooler to cope with harsh functioning situations.
2.Adopt impartial huge enthusiast combined with oil cooling technique, reduced temperature and a lot more secure.
CZPTtrical Method
one.Standardized layout, secure and reliable.
2.Specialist wiring interface,the wiring is realistic, simple, clear and straightforward to maintain.,
three.Schneider and Siemens are outfitted with a sequence of large-degree parts, and their secure use is assured for a lengthy time.
Direct CZPT
one.1: one immediate push, steady and efficient.
two.Adopts more mature split-sort immediate drive, which is far more reputable and easier to maintain than integrated generate.
3.CZPTed model, huge size coupling to guarantee the lengthy existence of the drive method.
Adaptable
For some regions with bad running conditions this kind of as large temperature and high humidity,massive-region plate warmth exchangers and large-performance air coolers are utilised.
Exhaust pipe
The exhaust pipe adopts double-layer bellows,and the oil passage adopts specific temperature resistance of a hundred twenty five °C large-pressure hose.
CZPT Parameters:
Model | Discharge Pressure | Discharge Air Quantity | Motor Energy | Dimension(mm) | Discharge Pipc.Dia | Device Excess weight |
SEF350Z | .8MPa | 10.0m³/min | 55KW | 1900X1270X1570 | 1X2″ | 1560KG |
1.0MPa | nine.0m³/min | |||||
1.3MPa | seven.8m³/min | |||||
SEF460Z | .8MPa | 13m³/min | 75KW | 1900X1270X1570 | 1X2″ | 1731KG |
1.0MPa | eleven.8m³/min | |||||
one.3MPa | nine.6m³/min | |||||
SEF565Z | .8MPa | sixteen.0m³/min | 90KW | 2620X1670X1800 | 1X2″ | 2260KG |
one.0MPa | fourteen.2m³/min | |||||
1.3MPa | 12.2m³/min | |||||
SEF710Z | .8MPa | twenty.5m³/min | 110KW | 2620X1670X1800 | 1X2″ | 2770KG |
one.0MPa | seventeen.8m³/min | |||||
1.3MPa | 15.5m³/min | |||||
SEF780Z | .8MPa | 23.5m³/min | 132KW | 2620x1670x1800 | 1×2″ | 2926KG |
1.0MPa | 20.5m³/min | |||||
one.3MPa | 17.0m³/min | |||||
SEF1060Z | .8MPa | 30.0m³/min | 160KW | 3070X2140X2130 | DN80 | 4100KG |
one.0MPa | 26.0m³/min | |||||
1.3MPa | 22.0m³/min | |||||
SEF1165Z | .8MPa | 32.0m³/min | 185KW | 3070X2140X2130 | DN80 | 4400KG |
one.0MPa | 28.5m³/min | |||||
1.3MPa | 25.0m³/min | |||||
SEF1270Z | .8MPa | 35.0m³/min | 200KW | 3420X2220X2130 | DN100 | 5200KG |
one.0MPa | 31.0m³/min | |||||
one.3MPa | 27.0m³/min | |||||
SEF1420Z | .8MPa | forty one.0m³/min | 250KW | 3420x2220X2130 | DN100 | 5300KG |
1.0MPa | 39.0m³/min | |||||
one.3MPa | 35.0m³/min | |||||
SEF1765Z | .8MPa | 50m³/min | 280KW | 4200X2380X2550 | DN125 | 5600KG |
one.0MPa | 42m³/min | |||||
SEF1980Z | .8MPa | 56m³/min | 315KW | 4200X2380X2550 | DN125 | 7980KG |
1.0MPa | 50m³/min | |||||
one.3MPa | 43m³/min | |||||
SEF2190ZW | .8MPa | 63m³/min | 355KW | 3690X2350X2150 | DN125 | 7350KG |
1.0MPa | 55m³/min | |||||
one.3MPa | 47m³/min | |||||
SEF2580ZW | .8MPa | 73m³/min | 400KW | 4070X2300X2250 | DN150 | 8100KG |
1.0MPa | 63m³/min | |||||
one.3MPa | 53m³/min | |||||
SEF2860ZW | .8MPa | 81m³/min | 450KW | 4070X2300X2250 | DN150 | 8500KG |
1.0MPa | 71m³/min | |||||
1.3MPa | 60m³/min | |||||
SEF3145ZW | .8MPa | 89m³/min | 500KW | 4300X2350X2150 | DN150 | 9000KG |
1.0MPa | 79m³/min | |||||
one.3MPa | 67m³/min | |||||
SEF3530ZW | .8MPa | 100m³/min | 560KW | 5000X2350X2150 | DN200 | 10000KG |
SEF3885ZW | .8MPa | 110m³/min | 630KW | 5000X2350X2150 | DN200 | 11000KG |
Product HIGHLIGHTS
one.The brand energy,trustworthy good quality, stable efficiency.
The harsh thermal equilibrium serviceability can guarantee that the machine function properly underneath substantial temperature environment (≤40ºC)
2.Unique patent layout, mild load startup system
3.Productive cooling technique, divided into 3 areas: water- cooled ,mid- chilly, oil cold, which ensure the reliable operation of diesel motor, and it’s suited for higher temperature working setting
4.Impartial research and advancement of the opposite door design, rational format, which is straightforward to do regular maintenace ,with advantages of the set and transportable compressor
five.A single stage lifting, forklift hole gadget, equipped with drag ring.It is ideal for mend auto transportation, easy to transfer and installation of the unit
six.Water-resistant and dustproof layout, which is appropriate for outdoor difficult doing work atmosphere
7.According to consumer requirements, the heating boiler and remote parts is accessible for chilly commencing
Merchandise Applications:
CZPT and CZPT
Our employees pack the examined CZPTs in wood circumstances. Right after the packaging is completed, the CZPT will be transported to the port and then delivery to the globe.
Our Exhibition
Our provider
one.Pre-sale services:
Act as a good adviser and assistant of clientele allow them to get abundant and generous returns on their investments .
1.Select gear model.
two.Design and style and manufacture products according to client’s specific need
three.Prepare complex staff for clients .
2.Solutions during the sale:
one.Pre-check out and acknowledge merchandise in advance of shipping .
two. Aid clientele to draft fixing programs .
3.After-sale services:
Supply considerate providers to decrease clients’ problems.
one.CZPT Following-revenue support,expert engineers offered to support machinery at residence or oversea.
2. 24 hrs technological assistance by e-mail.
three.Other essential technological services.
Make contact with specifics: