Helical-worm gearmotors
Due to their design and from being combined with a helical gear stage, the helical-worm gearmotors S..DR.. have especially high efficiency. They are also extremely low-noise and therefore avoid high noise emission levels.
Low-noise continuous operation: equipment unit combination optimized regarding efficiency
Do you anticipate a drive answer to impress you using its high level of efficiency and efficiency? In that case, we’d recommend our high-quality helical-worm gearmotors EP for you. These could be implemented separately in the modular system. In this way, they offer you a massive range of sizes, equipment ratios and motor sizes.
However, their greatest strength is their running smoothness and their extremely low noise development. One thing is certain – With the helical-worm gearmotors EP you opting for a robust drive solution which you will hardly actually hear.
The overall concept offers you a lot more practical product characteristics and benefits. These include the significantly higher effectiveness of the helical-worm combinations as opposed to single helical-worm gear units. This is how you save additional energy in the operation of your systems and so are able to noticeably reduce ongoing operating costs.
You will receive the low-noise helical-worm gearmotors EP. – to suit your individual requirements – with an array of AC motors. In addition, you can freely configure all the relevant properties. In this manner, you can effectively make use of all the benefits offered by this mixture of low-noise helical-worm equipment unit and performance-optimized electric motor. Even greater variance may be accomplished because of the optional flange or foot-mounted style and by selecting between solid and hollow shaft.
Save time and money
By opting for among our gearmotors, you are already saving time and money with this selection and project planning. The reason being our modular system allows a multitude of mixture options for gear products and motors. You can therefore reduce operating costs, count on a long service life and reap the benefits of simplified maintenance that’s feature of our brand.
Helical-worm gear units
Helical-worm combinations with significantly better efficiency than solitary helical-worm gear units
Very low-noise operation
Available variants:
Foot- or flange-mounted
B5 or B14 flange-mounted
Solid or hollow shaft
Hollow shaft with keyed connection, shrink disk, splined hollow shaft, or Ever-Power
More on helical-worm equipment units of series EP
AC motors
Combine the helical-worm equipment unit with our AC motors:
Characteristics
Quiet and dependable transmission of torque
High overload capacity
Hardened steel worm equipment and bronze alloy worm steering wheel provide exceptional sturdiness and lengthy service life.
Optional heavy duty bearings deliver high radial and axial load capacity
High strength cast iron housing (SK02050 – SK43125)
Lightweight, corrosion-resistant light weight aluminum alloy housing (SK02040.1)
Application Specific Solutions
Fields of use
Intralogistics
Material handling
Presses
Version
Solid and Hollow shaft (keyed, shrink disc ) Designs
Available in footed, shaft install or flange mounted configurations
Right Angled gear units
Your advantages
Economical operation
Low noise
High permitted overhung loads
Helical-worm Gearmotor S Series
S series
Ever-Power helical-worm gear devices are helical/helical-worm combinations, so they are better than normal helical-worm gear units. Because of their outstanding performance, these drives can be utilized in every industrial sector and customized to individual torque and quickness requirements. The reduction ratios afforded by the helical-worm gear stage and the low noise levels during operation make these gearmotors ideal low-cost solutions for basic applications.
Available versions:
Foot-mounted or flange-mounted
B5 or B14 Flange-mounted
Solid or hollow shaft
Hollow shaft with keyed connection, shrink disc, splined hollow shaft
Helical worm geared motors
Tough, compact, eye-catching!
Because of the unique combination of optimized worm wheel material with special lubricants, optimized form, this powerful engine achieves high levels of efficiency and torque. The casing machined on all sides enables diverse mounting options. Double chamber shaft seals are utilized as standard.
The low contour design helps it be suitable for implementing applications e.g. in the food industry. The housing has no recesses, which simplifies cleaning – a particularly important feature for areas with stringent hygiene requirements.
Technical Data
Number of sizes:6
Power Range:0.12 – 7.5kW
Output torque range:50 – 1,300Nm
Ratio:3 – 3,400
Output option:result shaft, result shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/mounting:uniblock, flange, torque arm, foot
Course 12 Helical and hardened and surface worm gears: Provides higher efficiencies and greater torque capacity in smaller sizes.
Multiple Input Options: Integral gear motors, ” or helical worm gear motor metric shafts, NEMA, IEC, and servo adapters provide unmatched drive versatility.
Multiple Output Options: Hollow bores and shrink disks for shaft installation, inch and metric result shafts, mounting pilots and flanges provide a wide selection of design solutions.
UNIBLOCK Housing: For maximum rigidity universal installation on five sides or via a torque arm.
Sealed for Washdown: Maintains contaminants and water out.
Worldwide Electric motor: Multiple leads and windings for worldwide multi volt/Hz requirements in addition modular design to simply accept brakes, encoders or forced cooling.
EP gear motors are economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical correct angle worm geared motors arranged new standards for reliability, effectiveness and economic climate with unparalleled features including hollow shafts in the tiniest sizes. An inverter friendly design provides for easy integration right now and a truly future proof remedy. The EP gear motor offers total flexibility in mounting options includes shaft, base, face, and flange solutions. The engine terminal box could be mounted in option positions rotated in 90º steps around the engine frame providing for unparalleled integration options.
EP gear motors comply with UNITED STATES and International specifications, including NEMA, IEC, CSA, and CE, the EP series permits worldwide acceptance, a true total answer for our global clients.
Excellent protection of IP65 acc. to IEC 529 assures you that the EP series can be dust tight and hose proof,and can be used outdoors or in wet and dusty environments without the use of additional enclosures. Full rated output is available at the result shaft of the unit.
Product Features
Power rating up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Completely enclosed, sealed against dust and water spray
Lubrication change first after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Standard), IP66 (Optional)
Connection Standard with CAGE CLAMP®
Additional features:
Connecting with Connect connectors.
With integrated inverter up to 7,5kW.
EP-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to Sobre 60034
Corrosion category predicated on DIN ISO 12944-5
C1, C2, C3, C4, C5-I, C5-M
Due to the unique combination of optimized worm wheel material with special lubricants and optimized shape, this powerful geared engine achieves high levels of efficiency and torque. The reduced contour design helps it be suitable for implementing applications electronic.g. in the meals industry. The housing has no recesses, which simplifies cleaning – an especially essential feature for areas with stringent hygiene requirements.
Nominal torque: 50 – 1300 Nm
Rated power: 0.12 – 7.5 kW
Ratio: 3 – 3400
The 800BR contains a wide selection of compact, heavy duty helical gear drives with long life performance features and simplified maintenance. The use of state of the art helical and worm gear combinations affords optimum overall performance fulfilling a multitude of ratio requirements. The 800 BR is definitely functionally interchangeable with many major manufacturer’s drives.
SPECIFICATIONS
Dual and triple reduction ratios from 8:1 to 900:1,
4 case sizes – 830, 840, 850, 860
All products shipped pre-lubed for your unique mounting position with KluberSYNTH UH1 6-460
Available in NEMA C-face flanged and immediate input
Projecting and hollow result shafts
Available accessories
Output flange kits
Torque arm kits
Base kits
Output shaft kits
Product Features
Available in nontoxic white-colored (BK) and stainless epoxy finish (SBK)
Available in hollow or projecting output shafts
Dual and triple reduction ratios
Flanged or foot mounted
All systems adaptable to ground, sidewall or ceiling mounting
Helical worm geared motor
0,12 – 5,5 kW
4 – 996 Nm / 6 – 316 rpm
Stober MGS S helical worm geared motor
Efficient small right-angle geared electric motor. A favorably priced alternative for the standard duties anticipated of a right-angle drive.
5 gear sizes (S0 to S4).
Engine power 0.12 to 5.5 kW.
Rated torque of 23 to 800 Nm.
Gear ratios from i = 6 to 680.
Backlash smaller than 20 arcmin.
Modular, torsionally stiff , leak-proof design.
Helical worm geared motors obtainable with:
Solid shaft with keyway.
Hollow shaft with keyway, optional with cover.
Hollow shaft with shrink disk, optional with cover.
Gear unit and AC motor are directly flange mounted, the pinion is on the electric motor shaft. This integrated compact design is an essential element for the high accuracy and the amazing stiffness of EP geared motors.
For vector-controlled inverter operation usage of an incremental encoder is provided for as standard.
Worm gearboxes and helical worm gearboxes / geared motors (S and SS)
The amount of efficiency in Ever-Power powerful worm gearboxes and helical worm gearboxes is a lot more than 90%. All worm shafts are manufactured from case hardened alloy metal and the flanks are precision floor. The worm wheels are made from unique wear-resistant bronze. Helical worm gears include a helical equipment. Worm gears with shrink disc, torque limiter, along with adjustable backlash designs are also part of our standard item range.
Worm gearboxes and helical worm gearboxes type S and SS are high-Functionality gearboxes in universal design. The housings are manufactured from high quality cast iron. The rugget walls and inner ribbing ensure extremely torsional stiff and sound dampening housings. The exterior ripping provides a rapid heat conducting.
Type S und SS
Technical characteristics:
Optimised size/performance ratio
Designed for permanent operation under rough circumstances
Above average lifespan
Housing produced from top quality grey cast iron with tough walls and internal ribbing
Extreme torsional resistance and low noise
Case hardened worm shafts and worms with precision floor flanks
Worm wheels produced from unique bronze
Superior smooth operation
Space saving angular drive
Helical worm gearboxes equipped with helical gear wheel
Low engine speeds
Options:
Basic mounting, flange mounting or universal design
Output shaft available as solid shaft or hollow shaft
Shrink disc, torque limiter,and also adjustable backlash
Second shaft end for fitting encoders or brakes
Torque arm
IEC-adaptor
NEMA version
Free input shaft
ATEX specification according to directive 94/9/EG