EP 700 Series STAINLESS Worm Gear Rate Reducers | Ever-Power Gear
The Original Stainless Reducer
The Ever-Power Gear 700 Series Worm Gear Rate Reducer has been a foundation in food and beverage applications for decades. As a leader in worm gear technology, Ever-Power Gear continues to boost product performance by developing innovative designs to meet up more stringent demands and anticipated tightening of federal regulations in the food and beverage industry.
Blending trusted 700 Series worm gearing with a forward thinking new exterior design, the stainless 700 series has been optimized to withstand the harshest washdown circumstances. The units feature trusted 700 Series worm gearing, a 316 stainless rounded housing with smooth uninterrupted areas designed to prevent particle accumulation and pooling fluids, dual lipped shaft seals, covers for all hardware and counter bored holes.
NSF stainless steel worm reducers Certified Logo
Sure, a stainless gearbox costs greater than a painted 1, but investing in a more corrosion resistant gearbox saves money and makes the most sense over time. Unmatched product functionality in highly caustic washdown applications coupled with first class customer service makes Ever-Power Gear your 1st choice for speed reducers and gearmotors!
Product Features
NSF International Certified
316 stainless steel housing, bearing carriers and flanges
303 stainless output shafts
Rounded housing eliminates virtually all smooth surfaces and prevents foreign matter accumulation or standing up fluid
Elimination of most exposed hardware promotes even surfaces to optimize clean down effectiveness
Lubed forever with H1 rated meals quality lubricant Klubersynth UH1 6-460
Flange design incorporates jack bolt holes to facilitate easy motor-reducer separation
5:1 – 100:1 Single Reduction
100:1 – 3600:1 – Double Reduction
Motor flange design incorporates an O-ring to reduce ingress of particles or fluids
Polished matte complete maintains clean appearance throughout operation
Optional high pressure washdown seal available
Obtainable in hollow and solid output shaft
Stainless Steel, Heavy-duty Correct angle (SSHdR) series worm gearboxes are made with 304 stainless. All reducer areas are polished and rounded to prevent organism growth on surfaces. SSHdR series Hollow Result Bore reducers can be found in speed ratios which range from 5:1 to 60:1 with imperial center distances which range from 1.75 to 3.25 inches. Also, our stainless gearboxes come pre-packed with EP food grade lubricant.
“EP” series Flange Input – Hollow Bore Output series stainless steel correct angle worm gear reducers are stocked as finished goods with hollow result bore sizes which range from 1” to 2-3/16” with offered center distances which range from 1.75 to 3.25 inches. All motor input flanges are NEMA C-face quill style styles and each unit is sold pre-filled with EP meals grade lubricant. STAINLESS bushing kits can be purchased separately to permit for a lot more mind shaft size configurations.
Product Features
5:1 – 60:1 ratios
Center distances which range from 1.75 to 3.25 inches
304 stainless steel housing, covers and flanges
Smooth, polished areas and etched nameplate
Internal bladder functions as a breather and effectively dispels heat
Double-lipped VITON oil seals (at output)
15CrMo4 NEMA quill insight with carburizing heat treatment
CuSn12Ni2 bronze alloy worm wheel with high efficiency gear tooth configuration
RoHS plastic-type covers supplied to fill unused mounting slots
0-ring provided on input flange to avoid moisture intrusion
Pre-stuffed with Mobil CIBUS 460 H1 food grade lubricant
Interchangeability with major brands
1-year warranty
STAINLESS (SS Series)
Grove Gear Stainless Steel gear reducers offer superior corrosion security. They are rust evidence and in a position to withstand the harshest circumstances. The stainless housing, cover and exterior hardware offer an exceptionally long life.
Center distances from 1.33” through 3.250”.
6 sizes available with ratings to 17 HP.
Available in single and double reduction.
Ratios from 5:1 to 3600:1.
316 stainless steel housing and covers to withstand extreme environments.
Factory-filled with high quality Mobil Glygoyle 460 polyalkalene glycol lubricant
Vent-free “sealed-for-life” design with Enviroseal technology.
EP dual lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
O-ring on encounter of input flange offers a positive seal against moisture intrusion.
303 stainless steel output shaft.
Worms are cut, heat-treated, floor and polished to supply efficient, quiet operation.
All units are 100% run and leak tested at the factory to insure you get the highest quality product.
Ultimate application flexibility with all-angle installation provisions, the widest collection of item bases and flanges and the biggest selection of stock reducer styles.
Mounting measurements are interchangeable with the majority of industry standard reducers.
EP Stainless Steel
Right Angle / Large Washdown Duty Stainless Steel Speed Reducer
This STAINLESS reducer is made for DURABLE Washdown applications and is resistant to numerous forms of wear. This is what you wish to use for severe environmental conditions.
STAINLESS WORM GEARBOX
Comply with HACCP and EHEDG regulations
It is becoming increasingly difficult to really get your machine to meet up the HACCP and EHEDG regulations, while your visitors vulue this a growing number of. The stainless worm gearbox drive program Ever-Power enables you to stay affordable but meet tcustomer demants.
The Ever-Power stainless worm gearbox types are made to meet the guidelines. As a result, they are resistant to a thorough cleaning regime, is made from hygienic components and so are also dead places, and horizontal surfaces whenever you can, avoided. Of training course, the material of the products is stainless steel.
Output torques of 40Nm up to 160Nm.
Result shaft sizes of 18mm up to 25mm.
Input flanges 63B14a up to 90B5.
Reduction ratios of i=7,5 up to i=100.
Food grade oil, meals grade seals and hygienic design.
Materials worm wheel: Cu bronze SN12 Ni2 (UNI7013-10), material hardened steel worm shaft and ground profile ZI (UNI4760).
Belastingscapacitieiten conformity: ISO.14521, DIN.3996, BS 721, AGMA 6034, ISO 6336, DIN 3990, DIN 743, ISO 281.
STAINLESS WORM GEAR SPEED REDUCERS
◦ Right angle worm gearbox
◦ Ratio 5:1 to 60:1
◦ Size 206 to 325 (2.06″ to 3.25″ between input and output shaft)
◦ Designed for heavy-duty washdown
◦ Rust free housing, flange, and shafts are ideal for food industry
◦ Ideal for tough conditions and corrosive applications
◦ Internal bladder adjusts to heat and pressure – No dependence on a surface breather
◦ Heat-treated steel worm shaft w/ floor thread
◦ Light weight aluminum bronze (ALBC3) worm wheel
◦ Polished matte finish
◦ Top quality double lip oil seals
◦ Input flange O-ring repels external moisture
◦ USDA H1 food grade lubricant : MOBIL SHC CIBUS 460
◦ Compatible with 56C, 145TC and 182/4TC Engine Inputs
◦ Twelve months limited warranty
Ever-Power STAINLESS S Series right-position worm reducer is perfect for harsh washdown conditions in food processing or other applications with high temperature/high pressure sprays. The S Series comes standard supplied with synthetic oil for life time lubrication and is made up of a stainless steel housing that is created for security in washdown applications, also made for multiple mounting configurations.
Hygienic stainless BJ worm gearboxes
Ever-Power offers a self-produced stainless gearbox range of high quality. The series was developed specifically for the meals industry and various other industries where there are consistently stringent requirements for the resistance of the material and the easy-to-clean design.
The gearboxes are made from a smooth stainless gear housing, they are life lubricated and may of course be supplied with oil approved for the food industry. Oil seals are standard manufactured from nitrile rubber.
To reduce the chance of bacterial growth, the look is characterised simply by smooth machined surfaces without unnecessary flanges, recesses and installation holes. It is also possible to purchase the gearboxes with torque arm, side flange, free worm and plug-in shaft. Other modifications are performed on request including such as stainless spindle gears.
In cases where you will want complete hygienic gear motor, we will offer the EP-gearboxes fitted with stainless AC or servo engine.
Resistant to cleaning with drinking water under pressure
The protection of the gearboxes is IP65, and for stainless motors it really is IP66. This means that the products could be cleaned with water under pressure from all directions. To accomplish a standard protection of IP66 by assembly of gearboxes and electric motor, you must use a gasket of nitrile rubber for the joint. This means that the apparatus motors are well suited for free mounting without a traditional stainless security cover in areas where hygiene requirements are highest. Hidden resources of pollution can thereby be avoided.
The gearboxes are as standard given a center distance of 31, 42, 61 and 99 mm with gear ratios from 5:1 to 100:1 and with an output torque of up to 900 Nm.
Stainless steel worm gearbox
Ratios
Maximum output torque
[Nm]
Housing design
Series 31
5:1 – 75:1
13.2
Stainless steel
Series 42
5.4:1 – 75:1
57
Stainless steel
Series 61
7:1 – 100:1
208
Stainless steel
Series 79
7:1 – 60:1
337
Stainless steel
Series 99
7:1 – 100:1
891
Product selection brochures available below:
Full Integral Horsepower Product Catalog
Worm Product Selection Table
S 45 Series – 0.25 – 1HP, 97 – 450in-lbs, 17.2 – 250RPM
S 50 Series – 0.25 – 2HP, 199 – 567in-lbs, 17.5 – 250 RPM
S 63 Series – 0.25 – 2HP, 209 – 1199in-lbs, 18.6 – 250RPM
S 85 Series – 0.5 – 5HP, 666 – 2353in-lbs, 18.2 – 250RPM
Additional flange and shaft inserts available and may be requested during product selection. To purchase, please contact Bison at 1.800.ATBISON (282.4766) and ask to talk with an Automation Specialist. Online selection and purchasing coming soon!
Stainless Steel Solutions
Powerful, Clean Solutions with a Stainless Reputation.
Ever-Power Drive’s stainless precision motion gearboxes are made for sterile manufacturing conditions. The product’s smooth surface and curved contour allows for easy cleaning and bacteria-free surfaces, ideal for food processing and pharmaceutical applications. The merchandise is designed and ranked to IP69k providing maximum safety against contaminant ingress as well as leak free operation.
Catalogued models of Ever-Power Gear’s well-known stainless 700 Series speed reducers are actually available with standard 2-day delivery. Process improvements possess yielded the industry’s best standard lead time for stainless steel worm gear reducers.
Ever-Power Gear’s SS700 Series, the initial “domed crown” stainless steel reducers, are created for maximum corrosion resistance and superior efficiency in high-pressure food digesting and packaging washdown applications.
A convenient after hours/holiday hotline can be designed for emergency orders. Catalogued SS700 Series versions are stocked at local and regional distribution centers to make sure fast delivery.
All SS700 versions are NSF Certified and have many maintenance-friendly features including electropolished exterior finish, sealed electric motor flange, and covered hardware. To avoid miniscule niches that can sponsor microbial contamination, the nameplate has been laser marked to supply a smooth uninterrupted surface. A large internal essential oil reservoir, filled up with H1 food-grade lubricant (Klubersynth UH 1 6-460) and sealed for life, allows for an array of operating temperature ranges and extended service existence.