Make use of a tapered or QD bushing from Ever-Power with sheaves, pulleys, sprockets and several other power tranny applications. Flanged quick-disconnect bushings feature a completely split style to help provide easy installation and disassembly. A tapered bushing with directly edges uses an internal screw to help drive the bushing into the shaft, while a split taper has a flange and an integral on the bushing to greatly help provide more drive.
L – Space required to tighten bushing or loosen to eliminate hub with puller using brief hex key.
M – Space required to remove bushing using screws as jackscrews – brief hex key – no puller reuired.
Listed required hub diameter can be for reference only. Severe conditions may require larger hub and in some cases a slightly smaller sized hub may be satisfactory. Inquire about specific application.
We are able to also supply special bushings manufactured from other machinable components. Please inquire
External key of all sizes for positive drive and better torque carrying capabilities
Double-split barrel for positive clamping
Solid flange to maintain concentric bores
Available in inch, metric, and spline bores. Bore range between 3/8″ to 10″
Gates Taper-Lock bushings are accustomed to install pulleys, sprockets and sheaves on shafts. The durable stainless construction is perfect for meals and beverage applications or where non-corrosive sprockets are needed to prevent rust.
This Taper-Lock bushing is ideal for use with same-type sheaves, sprockets, and pulleys in power transmission applications that want synchronous rotation. The carbon metal bushing provides strength and resistance to wear and includes mounting bolts and washers. Taper-Lock sheaves, sprockets, and pulleys (not included) are available in a variety of outside diameters to match this Taper-Lock bushing, allowing the complete selection of the number of drive the teeth or grooves. This bushing is usually suitable for use in an array of mechanical and electronic adjustable drives, including auto and printing industries.

Ordinary bearings provide low-friction sliding contact for relative motion between elements of a machine. They will be the simplest type of bearing, with no rolling elements, and there are three basic types of basic bearings: radial basic bearings (also called taper bore bushing china sleeve bearings or bushings) to aid rotating or reciprocating shafts, thrust bearings (also known as washers) to support axial loads on shafts, and linear bearings to support and guide the movement of parts in a directly range. Flanged sleeve bearings have a flange using one end to support axial loads. Spherical simple bearings are radial bearings that enable angular misalignment of the shaft. Simple bearings are produced from durable, low-friction components such as for example sintered or cast bronze alloys, plastic, or a mixture of a steel shell and a plastic-type bearing surface. They can be lubricated externally or by a lubricant embedded in the bearing material. Plain bearings are used in automobiles, structure and mining products, textile manufacturing gear, and robotics, among others.
The maximum bore is supplied with a typical ANSI/AGMA 9002-B04 or ISO 286-2 keyway.
Taper Lock Bushing installation screws can be either inch (UNC) or metric (BSW) and care should be taken to choose the proper hub part quantity.
Taper Lock Busings are a product of Baldor Dodge and so are not included with Lovejoy coupling hubs.
Maximum bores size and torque capacities are per Dodge specifications and Lovejoy isn’t responsible for the accuracy of the values listed relative to bore size and torque capacity.
Split Taper Bushings. Split-taper bushings are used to mount sprockets, pulleys, and couplings onto shafts. They have a tapered, split body that locks the bushing down onto the shaft, prevents it from slipping during procedure, and transfers more torque.
All reborable bushings are stocked
without sawsplit to facilitatere-machining.
Sawsplit must be manufactured in bushing to permit it to compress for proper gripping of the shaft.
Adapters for TAPER-LOCK bushings are recommended for use where it is far more convenient to directly bore than to drill, tap and taper bore hubs to accommodate bushings. The adapter is a gray iron, taper-bored sleeve whichfits into the straight bore of a hub. The bushing just fits in the adapter which can be tapped for the bushing screws. When tightening the locking screws, adapter is usually extended against the hub bore contracting the bushing tightly upon the shaft.
Ever-Power offers an extensive range of energy absorbing elastomeric isolators that limit the transmitting of structure-borne vibration and impacts. Our products are designed for simple use and a multitude of orientations in compression, shear and slanted angle loading. While economical, the products are constructed with quality rubber, silicone, Neoprene and steel materials that allow support for the proper amount of load for every application. Filter through our in-depth product report on elastomeric products including bottom mounts, cup mounts, bumpers, bushings and grommets to get the right solution for your application.
Use a tapered or QD bushing from Ever-Power with sheaves, pulleys, sprockets and many other power transmission applications. Flanged quick-disconnect bushings include a completely split design to help provide easy set up and disassembly. A tapered bushing with straight edges uses an interior screw to greatly help drive the bushing into the shaft, while a split taper has a flange and a key on the bushing to greatly help provide more drive.
L – Space required to tighten bushing or loosen to eliminate hub with puller using brief hex key.
M – Space necessary to remove bushing using screws as jackscrews – short hex key – no puller reuired.
Listed required hub diameter can be for reference just. Severe conditions may necessitate larger hub and in some cases a slightly smaller hub may be satisfactory. Inquire about specific application.
We are able to also supply special bushings made of other machinable components. Please inquire
External key on most sizes for positive drive and greater torque carrying capabilities
Double-split barrel for positive clamping
Solid flange to keep up concentric bores
Available in inch, metric, and spline bores. Bore range from 3/8″ to 10″
Gates Taper-Lock bushings are used to attach pulleys, sprockets and sheaves on shafts. The durable stainless construction is perfect for food and beverage applications or where non-corrosive sprockets are needed to prevent rust.
This Taper-Lock bushing is suitable for use with same-type sheaves, sprockets, and pulleys in power transmission applications that require synchronous rotation. The carbon steel bushing provides power and resistance to wear and includes mounting bolts and washers. Taper-Lock sheaves, sprockets, and pulleys (not really included) can be found in a number of outside diameters to match this Taper-Lock bushing, enabling the precise selection of the amount of drive tooth or grooves. This bushing is certainly suitable for use in an array of mechanical and electronic adjustable drives, including automotive and printing industries.