“H” Class Mill Chain is surely an ex-tremely powerful, serviceable chain initially de-signed for heavy drives and transfer conveyor purposes in saw mills as well as the paper and pulp market. “H” Class Chain has established itself for innumerable other industrial applications as well, particularly for moderate duty in abrasive atmospheres in which heavy, rugged chain is re-quired.
The sidebars of the “H” Class hyperlinks are rein-forced with sporting shoes which strengthen and stiffen the hyperlinks when it really is operated in troughs or over ?oors and runways.
Pin holes are precision cored to assure accu-rate pitch sizes, which vary from two.308 to four.000 inches. “H” Class Chain is obtainable in both riveted and cottered development. T-head pins engage two lugs cast about the links’ side-bars. This con?guration prohibits pin rotation through chain operation, eliminating abrasive put on and pitch elongation.
“H” Class Chain conforms to manufacturer’s requirements and it is wholly interchangeable with chains of other suppliers. “H” Class Chain is obtainable in -Locke Promal with tensile ranges of 9,450 to 40,500 lbs.
“H” Class Chain could operate in two directions. Being a drive chain, it travels during the direction with the closed barrel; for elevator or conveyor applications, it should really travel toward the open ends in the back links.
Brutaloy or cast steel sprockets are available to accommodate every single “H” Class pitch dimension. A wide assortment of attachments can also be avail-able for varied chain applications.