Single and double reduction planetary equipment drives to be utilized with electric, hydraulic, surroundings motors or mechanical power input from high speed, low torque sources to deliver decreased speeds at increased torques. The input part has regular SAE pads for engine mounting. Obtainable in the three result configurations shown below. Many units can be furnished with an integral parking brake.
Solitary reduction drives are limited by 3500 RPM input; dual reduction drives to 5000 RPM. Units with integral parking input acceleration is bound to 2500 RPM.The same torque is available in either direction of rotation. Torque rankings are intermittent. For constant operation reduce torque ratings to about 1/3 to 1/2 the values shown. Systems provide 95% power transmission efficiency.

Wheel Drive
Input side has regular SAE pads and splined insight. Output aspect has hub for installation automobile wheel. Free wheel is hydraulic planetary drive possible by using the spring disconnect to disengage the drive shaft. The disengage feature can be regular on all wheel drives.

Shaft Output
Input side standard SAE pads with splined insight. Output side choices include: Keyed circular, hexed, hollow, tapered or splined shaft.

Spindle Drive
Input side is regular SAE pads with splined insight. Output side has a flanged spindle for coupling to the strain.

Swing Drives
Ever-Power model 6 is offered with or without integral parking brakes. The “SW” Power Wheel provides extra-huge tapered roller bearings, a ductile iron hub and temperature treated ring gear to minimize backlash growth caused by wear. The external bearing nut provides the ultimate in shaft retention and shaft power. Output can be a spindle shaft or numerous sizes of integral pinion gears.