Additional Features:
Made of Steel
For use with cast iron bushed bore pulley
This U1 Bushing with 5-1/2″ bore is a high-quality precision product that’s built for strength and strength. U1 bushings are being used in an extensively broad range of applications, which includes; sprockets, shaves, pulleys, gears, and much more, we as well offer most of these items. What pieces this bushing apart may be the high-quality steel construction along with specific manufacturing and top quality control; this means that you always get yourself a premium quality steady product. What really pieces us apart from the other men is our experienced expert staff members and our company-wide objective of customer satisfaction.
1. Be sure the tapered cone areas of the bushing and the within of the driven merchandise will be clean and free of anti-seize lubricants.
2. Place the bushing in sprocket or additional part type that accepts the bushing.
3. Place cap screws loosely in pull-up holes. The bushing continues to be loose to make sure sliding suit on shaft.
4. With key on shaft, slide the sprocket or other component type to the required job on the shaft. Make sure you keep the heads of the cap screws attainable.
5. Align the sprocket or part type, tighten the screws alternatively and progressively until they happen to be pulled up tight. Usually do not make use of extensions on the wrench handles , nor allow the sprocket or portion to be drawn i connection with flange of bushing. At this point there must be a gap between your bushing flange and sprocket, make certain this gap will not close.
Dual split barrel ensures concentricity
Grips the shaft with positive clamp fit
High torque carrying capacity
Permits blind assembly
Load not carried or tied to mounting screws
External key of all sizes for positive drive and greater torque carrying capabilities
Double-split barrel for positive clamping
Solid flange to keep up concentric bores
Available in inches, metric, and spline bores. Bore range from 3/8″ to 10″
Solid Flange & Double Split Barrel – Assures better concentricity to the shaft.
Key to Key Drive – With keys about both shaft and product to provide the strongest possible travel.
3/4″ per Foot Taper on Barrel – Personal locking taper provides the highest degree of mechanical locking product to product.

Taper bushing are trusted as well as sprockets, v-belt pulleys, timing pulleys, coupling and other mechanical parts with taper bore connections.
Taper bushing series are made from high quality engineered materials with great tolerance. The characteristic is easy to work with and needs no extra alteration. These bushings can suit almost all types of assemblies and sizes. They are the best choice in design for mechanical connections.
To complete designations put bore size. For example: PD1215X16MM designates a 1215 taper bushing with a 16mm bore.
No costly re-boring: total range of both metric and imperial available.
Standard range fits up to 125mm/5″ shafts & Hub diameter required depends on the application.
Complete brief reach range offered, for compact compact assemblies & Clean, Compact Design.
Simple installation and removal.
This Split Taper Bushing was created exclusively for use with cast iron bushed bore pulleys and can be purchased on the same page as the pulley you need.
For use with 1 3/16” shaft sizes.
Includes 2 set screws.