Fan Motor, 1/8 hp 120V 2.2 Amp 3-Speed
General Explanation: New fan motor, removed from unused 18” or 24” China Air flow Compressor diameter TPI fans. Designed to run an 18” or 24” enthusiast blade (blade NOT included).
This motor includes a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All the wiring between your electric engine, capacitor and quickness control change is still installed nevertheless the cord itself is generally detached as observed in the photos. (Discover “Control Notice” below for change type.)
T (See “Application Notice” below for utilize in a variety of other applications.)
electric fan motor china Dimensions: The engine body is 5” diameter and 3 ½” long (not including the shaft). The engine shaft can be½” (0.500″) diameter x 2 ½” long with a collection screw clean. There are (4) threaded mounting lugs on leading of the motor, ½” lengthy x .16 dia. with washers and nuts. The studs may actually ‘ve got 4mm threads and to become on a 117mm (4.6”)diameter circle (3 ¼” measured in one stud to another).
Rate: The approximate electric motor speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Path of rotation (facing the shaft end of the electrical motor) is Clockwise.

Control Take notice: Motors may come with EITHER a 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we’ve demonstrated BOTH variations in the images). These two types of switches both control the engine in the same way (but you have a rotating knob and you have a pull-chain). If you order several engine at a time, we can do our best to supply your purchase with each one sort of control or the excess.
Application Note: Do NOT use this electric motor in a nonfan software. This is a totally enclosed fan electric engine and designed to have continuous ventilation over the engine casing for cooling. The housing isn’t vented and the electric engine will overheat and get into automatic thermal overload if run in a nonfan plan where there isn’t strong ventilation past the engine. (Caution Note: the electric motor will restart immediately when it cools back off.) Using this electrical motor for applications aside from 18 & 24″ TPI fans could also overload the electric motor and cause it to proceed into automatic thermal overload. (Your lover blade from another producer may possess a steeper blade angle.)
Origin: This electric motor is produced in China.