This collar has a quick-clamping design for making frequent adjustments using a lever handle rather than tools. It is well suited for applications that want quick alterations and procedure tuning such as adjusting guideline rails or locating pieces. It is made of aluminium with an anodized end that increases the metal’s wear and corrosion tolerant properties and increases its area hardness, holding electric power, and overall look. This collar posseses an aluminum lever manage with a precious metal anodized finish for quick installation and relieve of the collar. The operating temperatures because of this collar range from -40 to 93 degrees C (-40 to 200 degrees F). This shaft collar is ideal for use in various applications, which includes in the auto industry to situate elements in automobile electric power steering assemblies, the developing industry to locate elements on a conveyor belt program, and the hobby craft sector to hold wheels on axles in remote control vehicles, among others.

Shaft collars happen to be ring-shaped devices generally used to secure pieces onto shafts. In addition they serve as locators, mechanical stops, and spacers between various other components. The two fundamental types of shaft collars happen to be clamping (or split) collars, that can come in one- or two-piece models, and setscrew collars. In both types, one or more screws contain the collars set up on the shaft. In setscrew collars, screws happen to be tightened through the collar until they press directly against the shaft, and in clamping collars, screws happen to be tightened to uniformly compress the collar around the shaft without impinging or marring it. Setscrew collars and one-part clamping collars should be set up by sliding the collar over the finish of the shaft, while two-piece clamping collars individual into two halves and may be installed between pieces on the shaft. Shaft collars are manufactured from an array of materials including zinc-plated metal, lightweight aluminum, nylon, and neoprene. Found in nearly all sorts of machinery and sector, shaft collars are being used in applications including gearbox assemblies, motor bases, equipment tools, drive shafts, agricultural implements, medical apparatus, and paper and steel mill equipment, among others.

EPT manufactures shaft collars, rigid couplings, and zero-backlash movement control couplings including beam couplings, bellows couplings, Oldham couplings, curved jaw couplings, and miniature disc couplings. The company, founded in 1937, and headquartered in Marlborough, MA, complies with Restriction of Hazardous Substances (RoHS) and Registration, Evaluation, Authorization, and Restriction of Chemical compounds (REACH) standards.
One-part clamping shaft collar for applications requiring a far more uniform holding ability and higher axial load capability than setscrew collars
Quick-clamping collar design for making frequent adjustments without tools
Aluminum with an anodized end for greater corrosion level of Clamping Shaft Collars resistance, wear resistance, and surface hardness than plain aluminum
Includes an lightweight aluminum lever take care of with a gold anodized finish for speedy installation and discharge of the collar
Operating temperatures range between -40 to 93 degrees C (-40 to 200 degrees F)
Shaft collars are commonly used as manuals, spacers, mechanical stops, and for component alignment in a shaft. They are one of the most common power transmission factors and are found on devices in most industries.